/*- * Copyright (c) 2015 Luiz Otavio O Souza * Copyright (c) 2022 Mathew McBride * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include /* * Driver for Maxim DS1307 I2C real-time clock/calendar. */ #include "opt_platform.h" #include #include #include #include #include #include #include #include #include #ifdef FDT #include #include #include #endif #include #include "clock_if.h" #include "iicbus_if.h" enum { TYPE_DS1307, TYPE_MAXIM1307, TYPE_MICROCHIP_MCP7491X, TYPE_EPSON_RX8035, TYPE_COUNT }; struct ds1307_softc { device_t sc_dev; struct intr_config_hook enum_hook; uint32_t chiptype; uint8_t sc_ctrl; bool sc_use_ampm; }; static void ds1307_start(void *); #ifdef FDT static const struct ofw_compat_data ds1307_compat_data[] = { {"dallas,ds1307", TYPE_DS1307}, {"maxim,ds1307", TYPE_MAXIM1307}, {"microchip,mcp7941x", TYPE_MICROCHIP_MCP7491X}, {"epson,rx8035", TYPE_EPSON_RX8035}, { NULL, 0 } }; #endif static int ds1307_read1(device_t dev, uint8_t reg, uint8_t *data) { return (iicdev_readfrom(dev, reg, data, 1, IIC_INTRWAIT)); } static int ds1307_write1(device_t dev, uint8_t reg, uint8_t data) { return (iicdev_writeto(dev, reg, &data, 1, IIC_INTRWAIT)); } static int ds1307_ctrl_read(struct ds1307_softc *sc) { int error; sc->sc_ctrl = 0; error = ds1307_read1(sc->sc_dev, DS1307_CONTROL, &sc->sc_ctrl); if (error) { device_printf(sc->sc_dev, "%s: cannot read from RTC: %d\n", __func__, error); return (error); } return (0); } static int ds1307_ctrl_write(struct ds1307_softc *sc) { int error; uint8_t ctrl; ctrl = sc->sc_ctrl & DS1307_CTRL_MASK; error = ds1307_write1(sc->sc_dev, DS1307_CONTROL, ctrl); if (error != 0) device_printf(sc->sc_dev, "%s: cannot write to RTC: %d\n", __func__, error); return (error); } static int ds1307_sqwe_sysctl(SYSCTL_HANDLER_ARGS) { int sqwe, error, newv, sqwe_bit; struct ds1307_softc *sc; sc = (struct ds1307_softc *)arg1; error = ds1307_ctrl_read(sc); if (error != 0) return (error); if (sc->chiptype == TYPE_MICROCHIP_MCP7491X) sqwe_bit = MCP7941X_CTRL_SQWE; else sqwe_bit = DS1307_CTRL_SQWE; sqwe = newv = (sc->sc_ctrl & sqwe_bit) ? 1 : 0; error = sysctl_handle_int(oidp, &newv, 0, req); if (error != 0 || req->newptr == NULL) return (error); if (sqwe != newv) { sc->sc_ctrl &= ~sqwe_bit; if (newv) sc->sc_ctrl |= sqwe_bit; error = ds1307_ctrl_write(sc); if (error != 0) return (error); } return (error); } static int ds1307_sqw_freq_sysctl(SYSCTL_HANDLER_ARGS) { int ds1307_sqw_freq[] = { 1, 4096, 8192, 32768 }; int error, freq, i, newf, tmp; struct ds1307_softc *sc; sc = (struct ds1307_softc *)arg1; error = ds1307_ctrl_read(sc); if (error != 0) return (error); tmp = (sc->sc_ctrl & DS1307_CTRL_RS_MASK); if (tmp >= nitems(ds1307_sqw_freq)) tmp = nitems(ds1307_sqw_freq) - 1; freq = ds1307_sqw_freq[tmp]; error = sysctl_handle_int(oidp, &freq, 0, req); if (error != 0 || req->newptr == NULL) return (error); if (freq != ds1307_sqw_freq[tmp]) { newf = 0; for (i = 0; i < nitems(ds1307_sqw_freq); i++) if (freq >= ds1307_sqw_freq[i]) newf = i; sc->sc_ctrl &= ~DS1307_CTRL_RS_MASK; sc->sc_ctrl |= newf; error = ds1307_ctrl_write(sc); if (error != 0) return (error); } return (error); } static int ds1307_sqw_out_sysctl(SYSCTL_HANDLER_ARGS) { int sqwe, error, newv; struct ds1307_softc *sc; sc = (struct ds1307_softc *)arg1; error = ds1307_ctrl_read(sc); if (error != 0) return (error); sqwe = newv = (sc->sc_ctrl & DS1307_CTRL_OUT) ? 1 : 0; error = sysctl_handle_int(oidp, &newv, 0, req); if (error != 0 || req->newptr == NULL) return (error); if (sqwe != newv) { sc->sc_ctrl &= ~DS1307_CTRL_OUT; if (newv) sc->sc_ctrl |= DS1307_CTRL_OUT; error = ds1307_ctrl_write(sc); if (error != 0) return (error); } return (error); } static int ds1307_probe(device_t dev) { #ifdef FDT const struct ofw_compat_data *compat; if (!ofw_bus_status_okay(dev)) return (ENXIO); compat = ofw_bus_search_compatible(dev, ds1307_compat_data); if (compat->ocd_str != NULL) { switch(compat->ocd_data) { case TYPE_DS1307: device_set_desc(dev, "Dallas DS1307"); break; case TYPE_MAXIM1307: device_set_desc(dev, "Maxim DS1307"); break; case TYPE_MICROCHIP_MCP7491X: device_set_desc(dev, "Microchip MCP7491X"); break; case TYPE_EPSON_RX8035: device_set_desc(dev, "Epson RX-8035"); break; default: device_set_desc(dev, "Unknown DS1307-like device"); break; } return (BUS_PROBE_DEFAULT); } #endif device_set_desc(dev, "Maxim DS1307"); return (BUS_PROBE_NOWILDCARD); } static int ds1307_attach(device_t dev) { #ifdef FDT const struct ofw_compat_data *compat; #endif struct ds1307_softc *sc; sc = device_get_softc(dev); sc->sc_dev = dev; sc->enum_hook.ich_func = ds1307_start; sc->enum_hook.ich_arg = dev; #ifdef FDT compat = ofw_bus_search_compatible(dev, ds1307_compat_data); sc->chiptype = compat->ocd_data; /* Unify the chiptypes to DS1307 where possible. */ if (sc->chiptype == TYPE_MAXIM1307) sc->chiptype = TYPE_DS1307; #else sc->chiptype = TYPE_DS1307; #endif /* * We have to wait until interrupts are enabled. Usually I2C read * and write only works when the interrupts are available. */ if (config_intrhook_establish(&sc->enum_hook) != 0) return (ENOMEM); return (0); } static int ds1307_detach(device_t dev) { clock_unregister(dev); return (0); } static bool is_epson_time_valid(struct ds1307_softc *sc) { device_t dev; int error; uint8_t ctrl2; dev = sc->sc_dev; /* * The RX-8035 single register read is non-standard * Refer to section 8.9.5 of the RX-8035 application manual: * "I2C bus basic transfer format", under "Standard Read Method". * Basically, register to read goes into the top 4 bits. */ error = ds1307_read1(dev, (RX8035_CTRL_2 << 4), &ctrl2); if (error) { device_printf(dev, "%s cannot read Control 2 register: %d\n", __func__, error); return (false); } if (ctrl2 & RX8035_CTRL_2_XSTP) { device_printf(dev, "Oscillation stop detected (ctrl2=%#02x)\n", ctrl2); return (false); } /* * Power on reset (PON) generally implies oscillation stop, * but catch it as well to be sure. */ if (ctrl2 & RX8035_CTRL_2_PON) { device_printf(dev, "Power-on reset detected (ctrl2=%#02x)\n", ctrl2); return (false); } return (true); } static int mark_epson_time_valid(struct ds1307_softc *sc) { device_t dev; int error; uint8_t ctrl2; uint8_t control_mask; dev = sc->sc_dev; error = ds1307_read1(dev, (RX8035_CTRL_2 << 4), &ctrl2); if (error) { device_printf(dev, "%s cannot read Control 2 register: %d\n", __func__, error); return (false); } control_mask = (RX8035_CTRL_2_PON | RX8035_CTRL_2_XSTP | RX8035_CTRL_2_VDET); ctrl2 = ctrl2 & ~(control_mask); error = ds1307_write1(dev, (RX8035_CTRL_2 << 4), ctrl2); if (error) { device_printf(dev, "%s cannot write to Control 2 register: %d\n", __func__, error); return (false); } return (true); } static bool is_dev_time_valid(struct ds1307_softc *sc) { device_t dev; int error; uint8_t osc_en; uint8_t secs; /* Epson RTCs have different control/status registers. */ if (sc->chiptype == TYPE_EPSON_RX8035) return (is_epson_time_valid(sc)); dev = sc->sc_dev; /* Check if the oscillator is disabled. */ error = ds1307_read1(dev, DS1307_SECS, &secs); if (error) { device_printf(dev, "%s: cannot read from RTC: %d\n", __func__, error); return (false); } switch (sc->chiptype) { case TYPE_MICROCHIP_MCP7491X: osc_en = 0x80; break; default: osc_en = 0x00; break; } if (((secs & DS1307_SECS_CH) ^ osc_en) != 0) return (false); return (true); } static void ds1307_start(void *xdev) { device_t dev; struct ds1307_softc *sc; struct sysctl_ctx_list *ctx; struct sysctl_oid *tree_node; struct sysctl_oid_list *tree; dev = (device_t)xdev; sc = device_get_softc(dev); config_intrhook_disestablish(&sc->enum_hook); if (!is_dev_time_valid(sc)) device_printf(dev, "WARNING: RTC clock stopped, check the battery.\n"); /* * Configuration parameters: * square wave output cannot be changed or inhibited on the RX-8035, * so don't present the sysctls there. */ if (sc->chiptype == TYPE_EPSON_RX8035) goto skip_sysctl; ctx = device_get_sysctl_ctx(dev); tree_node = device_get_sysctl_tree(dev); tree = SYSCTL_CHILDREN(tree_node); SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "sqwe", CTLFLAG_RW | CTLTYPE_UINT | CTLFLAG_MPSAFE, sc, 0, ds1307_sqwe_sysctl, "IU", "DS1307 square-wave enable"); SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "sqw_freq", CTLFLAG_RW | CTLTYPE_UINT | CTLFLAG_MPSAFE, sc, 0, ds1307_sqw_freq_sysctl, "IU", "DS1307 square-wave output frequency"); SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "sqw_out", CTLFLAG_RW | CTLTYPE_UINT | CTLFLAG_MPSAFE, sc, 0, ds1307_sqw_out_sysctl, "IU", "DS1307 square-wave output state"); skip_sysctl: /* * Register as a clock with 1 second resolution. Schedule the * clock_settime() method to be called just after top-of-second; * resetting the time resets top-of-second in the hardware. */ clock_register_flags(dev, 1000000, CLOCKF_SETTIME_NO_ADJ); clock_schedule(dev, 1); } static int ds1307_gettime(device_t dev, struct timespec *ts) { struct bcd_clocktime bct; struct ds1307_softc *sc; int error; uint8_t data[7], hourmask, ampm_mode; sc = device_get_softc(dev); error = iicdev_readfrom(sc->sc_dev, DS1307_SECS, data, sizeof(data), IIC_INTRWAIT); if (error != 0) { device_printf(dev, "%s: cannot read from RTC: %d\n", __func__, error); return (error); } if (!is_dev_time_valid(sc)) { device_printf(dev, "Device time not valid.\n"); return (EINVAL); } /* * If the chip is in AM/PM mode remember that. * The EPSON uses a 1 to signify 24 hour mode, while the DS uses a 0, * in slightly different positions. */ if (sc->chiptype == TYPE_EPSON_RX8035) ampm_mode = !(data[DS1307_HOUR] & RX8035_HOUR_USE_24); else ampm_mode = data[DS1307_HOUR] & DS1307_HOUR_USE_AMPM; if (ampm_mode) { sc->sc_use_ampm = true; hourmask = DS1307_HOUR_MASK_12HR; } else hourmask = DS1307_HOUR_MASK_24HR; bct.nsec = 0; bct.ispm = (data[DS1307_HOUR] & DS1307_HOUR_IS_PM) != 0; bct.sec = data[DS1307_SECS] & DS1307_SECS_MASK; bct.min = data[DS1307_MINS] & DS1307_MINS_MASK; bct.hour = data[DS1307_HOUR] & hourmask; bct.day = data[DS1307_DATE] & DS1307_DATE_MASK; bct.mon = data[DS1307_MONTH] & DS1307_MONTH_MASK; bct.year = data[DS1307_YEAR] & DS1307_YEAR_MASK; clock_dbgprint_bcd(sc->sc_dev, CLOCK_DBG_READ, &bct); return (clock_bcd_to_ts(&bct, ts, sc->sc_use_ampm)); } static int ds1307_settime(device_t dev, struct timespec *ts) { struct bcd_clocktime bct; struct ds1307_softc *sc; int error, year; uint8_t data[7]; uint8_t pmflags; sc = device_get_softc(dev); /* * We request a timespec with no resolution-adjustment. That also * disables utc adjustment, so apply that ourselves. */ ts->tv_sec -= utc_offset(); clock_ts_to_bcd(ts, &bct, sc->sc_use_ampm); clock_dbgprint_bcd(sc->sc_dev, CLOCK_DBG_WRITE, &bct); /* * If the chip is in AM/PM mode, adjust hour and set flags as needed. * The AM/PM bit polarity and position is different on the EPSON. */ if (sc->sc_use_ampm) { pmflags = (sc->chiptype != TYPE_EPSON_RX8035) ? DS1307_HOUR_USE_AMPM : 0; if (bct.ispm) pmflags |= DS1307_HOUR_IS_PM; } else if (sc->chiptype == TYPE_EPSON_RX8035) pmflags = RX8035_HOUR_USE_24; else pmflags = 0; data[DS1307_SECS] = bct.sec; data[DS1307_MINS] = bct.min; data[DS1307_HOUR] = bct.hour | pmflags; data[DS1307_DATE] = bct.day; data[DS1307_WEEKDAY] = bct.dow; data[DS1307_MONTH] = bct.mon; data[DS1307_YEAR] = bct.year & 0xff; if (sc->chiptype == TYPE_MICROCHIP_MCP7491X) { data[DS1307_SECS] |= MCP7941X_SECS_ST; data[DS1307_WEEKDAY] |= MCP7941X_WEEKDAY_VBATEN; year = bcd2bin(bct.year >> 8) * 100 + bcd2bin(bct.year & 0xff); if ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0) data[DS1307_MONTH] |= MCP7941X_MONTH_LPYR; } /* Write the time back to RTC. */ error = iicdev_writeto(sc->sc_dev, DS1307_SECS, data, sizeof(data), IIC_INTRWAIT); if (error != 0) device_printf(dev, "%s: cannot write to RTC: %d\n", __func__, error); if (sc->chiptype == TYPE_EPSON_RX8035) error = mark_epson_time_valid(sc); return (error); } static device_method_t ds1307_methods[] = { DEVMETHOD(device_probe, ds1307_probe), DEVMETHOD(device_attach, ds1307_attach), DEVMETHOD(device_detach, ds1307_detach), DEVMETHOD(clock_gettime, ds1307_gettime), DEVMETHOD(clock_settime, ds1307_settime), DEVMETHOD_END }; static driver_t ds1307_driver = { "ds1307", ds1307_methods, sizeof(struct ds1307_softc), }; DRIVER_MODULE(ds1307, iicbus, ds1307_driver, NULL, NULL); MODULE_VERSION(ds1307, 1); MODULE_DEPEND(ds1307, iicbus, 1, 1, 1); IICBUS_FDT_PNP_INFO(ds1307_compat_data);