/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2016 Michael Zhilin * Copyright (c) 2015-2016 Landon Fuller * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any * redistribution must be conditioned upon including a substantially * similar Disclaimer requirement for further binary redistribution. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGES. */ #include #include #include #include "chipc_private.h" #include "chipcvar.h" /** * Return a human-readable name for the given flash @p type. */ const char * chipc_flash_name(chipc_flash type) { switch (type) { case CHIPC_PFLASH_CFI: return ("CFI Flash"); case CHIPC_SFLASH_ST: case CHIPC_SFLASH_AT: return ("SPI Flash"); case CHIPC_QSFLASH_ST: case CHIPC_QSFLASH_AT: return ("QSPI Flash"); case CHIPC_NFLASH: case CHIPC_NFLASH_4706: return ("NAND"); case CHIPC_FLASH_NONE: default: return ("unknown"); } } /** * Return the name of the bus device class used by flash @p type, * or NULL if @p type is unsupported. */ const char * chipc_flash_bus_name(chipc_flash type) { switch (type) { case CHIPC_PFLASH_CFI: return ("cfi"); case CHIPC_SFLASH_ST: case CHIPC_SFLASH_AT: return ("spi"); case CHIPC_QSFLASH_ST: case CHIPC_QSFLASH_AT: /* unimplemented; spi? */ return (NULL); case CHIPC_NFLASH: case CHIPC_NFLASH_4706: /* unimplemented; nandbus? */ return (NULL); case CHIPC_FLASH_NONE: default: return (NULL); } } /** * Return the name of the flash device class for SPI flash @p type, * or NULL if @p type does not use SPI, or is unsupported. */ const char * chipc_sflash_device_name(chipc_flash type) { switch (type) { case CHIPC_SFLASH_ST: return ("mx25l"); case CHIPC_SFLASH_AT: return ("at45d"); case CHIPC_QSFLASH_ST: case CHIPC_QSFLASH_AT: /* unimplemented */ return (NULL); case CHIPC_PFLASH_CFI: case CHIPC_NFLASH: case CHIPC_NFLASH_4706: case CHIPC_FLASH_NONE: default: return (NULL); } } /** * Initialize child resource @p r with a virtual address, tag, and handle * copied from @p parent, adjusted to contain only the range defined by * @p offsize and @p size. * * @param r The register to be initialized. * @param parent The parent bus resource that fully contains the subregion. * @param offset The subregion offset within @p parent. * @param size The subregion size. */ int chipc_init_child_resource(struct resource *r, struct resource *parent, bhnd_size_t offset, bhnd_size_t size) { bus_space_handle_t bh, child_bh; bus_space_tag_t bt; uintptr_t vaddr; int error; /* Fetch the parent resource's bus values */ vaddr = (uintptr_t) rman_get_virtual(parent); bt = rman_get_bustag(parent); bh = rman_get_bushandle(parent); /* Configure child resource with offset-adjusted values */ vaddr += offset; error = bus_space_subregion(bt, bh, offset, size, &child_bh); if (error) return (error); rman_set_virtual(r, (void *) vaddr); rman_set_bustag(r, bt); rman_set_bushandle(r, child_bh); return (0); } /** * Map an interrupt line to an IRQ, and then register a corresponding SYS_RES_IRQ * with @p child's resource list. * * @param sc chipc driver state. * @param child The device to set the resource on. * @param rid The resource ID. * @param intr The interrupt line to be mapped. * @param count The length of the resource. * @param port The mapping port number (ignored if not SYS_RES_MEMORY). * @param region The mapping region number (ignored if not SYS_RES_MEMORY). */ int chipc_set_irq_resource(struct chipc_softc *sc, device_t child, int rid, u_int intr) { struct chipc_devinfo *dinfo; int error; KASSERT(device_get_parent(child) == sc->dev, ("not a direct child")); dinfo = device_get_ivars(child); /* We currently only support a single IRQ mapping */ if (dinfo->irq_mapped) { device_printf(sc->dev, "irq already mapped for child\n"); return (ENOMEM); } /* Map the IRQ */ if ((error = bhnd_map_intr(sc->dev, intr, &dinfo->irq))) { device_printf(sc->dev, "failed to map intr %u: %d\n", intr, error); return (error); } dinfo->irq_mapped = true; /* Add to child's resource list */ error = bus_set_resource(child, SYS_RES_IRQ, rid, dinfo->irq, 1); if (error) { device_printf(sc->dev, "failed to set child irq resource %d to " "%ju: %d\n", rid, dinfo->irq, error); bhnd_unmap_intr(sc->dev, dinfo->irq); return (error); } return (0); } /** * Add a SYS_RES_MEMORY resource with a given resource ID, relative to the * given port and region, to @p child's resource list. * * The specified @p region's address and size will be fetched from the bhnd(4) * bus, and bus_set_resource() will be called with @p start added the region's * actual base address. * * To use the default region values for @p start and @p count, specify * a @p start value of 0ul, and an end value of RMAN_MAX_END * * @param sc chipc driver state. * @param child The device to set the resource on. * @param rid The resource ID. * @param start The resource start address (if SYS_RES_MEMORY, this is * relative to @p region's base address). * @param count The length of the resource. * @param port The mapping port number (ignored if not SYS_RES_MEMORY). * @param region The mapping region number (ignored if not SYS_RES_MEMORY). */ int chipc_set_mem_resource(struct chipc_softc *sc, device_t child, int rid, rman_res_t start, rman_res_t count, u_int port, u_int region) { bhnd_addr_t region_addr; bhnd_size_t region_size; bool isdefault; int error; KASSERT(device_get_parent(child) == sc->dev, ("not a direct child")); isdefault = RMAN_IS_DEFAULT_RANGE(start, count); /* Fetch region address and size */ error = bhnd_get_region_addr(sc->dev, BHND_PORT_DEVICE, port, region, ®ion_addr, ®ion_size); if (error) { device_printf(sc->dev, "lookup of %s%u.%u failed: %d\n", bhnd_port_type_name(BHND_PORT_DEVICE), port, region, error); return (error); } /* Populate defaults */ if (isdefault) { start = 0; count = region_size; } /* Verify requested range is mappable */ if (start > region_size || region_size - start < count) { device_printf(sc->dev, "%s%u.%u region cannot map requested range %#jx+%#jx\n", bhnd_port_type_name(BHND_PORT_DEVICE), port, region, start, count); return (ERANGE); } return (bus_set_resource(child, SYS_RES_MEMORY, rid, region_addr + start, count)); } /* * Print a capability structure. */ void chipc_print_caps(device_t dev, struct chipc_caps *caps) { #define CC_TFS(_flag) (caps->_flag ? "yes" : "no") device_printf(dev, "MIPSEB: %-3s | BP64: %s\n", CC_TFS(mipseb), CC_TFS(backplane_64)); device_printf(dev, "UARTs: %-3hhu | UGPIO: %s\n", caps->num_uarts, CC_TFS(uart_gpio)); // XXX: hitting a kvprintf bug with '%#02x' not prefixing '0x' in // some cases, and not apply the field width in others device_printf(dev, "UARTClk: 0x%02x | Flash: %u\n", caps->uart_clock, caps->flash_type); device_printf(dev, "SPROM: %-3s | OTP: %s\n", CC_TFS(sprom), CC_TFS(otp_size)); device_printf(dev, "CFIsz: 0x%02x | OTPsz: 0x%02x\n", caps->cfi_width, caps->otp_size); device_printf(dev, "ExtBus: 0x%02x | PwrCtrl: %s\n", caps->extbus_type, CC_TFS(pwr_ctrl)); device_printf(dev, "PLL: 0x%02x | JTAGM: %s\n", caps->pll_type, CC_TFS(jtag_master)); device_printf(dev, "PMU: %-3s | ECI: %s\n", CC_TFS(pmu), CC_TFS(eci)); device_printf(dev, "SECI: %-3s | GSIO: %s\n", CC_TFS(seci), CC_TFS(gsio)); device_printf(dev, "AOB: %-3s | BootROM: %s\n", CC_TFS(aob), CC_TFS(boot_rom)); #undef CC_TFS } /** * Allocate and initialize new region record. * * @param sc Driver instance state. * @param type The port type to query. * @param port The port number to query. * @param region The region number to query. */ struct chipc_region * chipc_alloc_region(struct chipc_softc *sc, bhnd_port_type type, u_int port, u_int region) { struct chipc_region *cr; int error; /* Don't bother allocating a chipc_region if init will fail */ if (!bhnd_is_region_valid(sc->dev, type, port, region)) return (NULL); /* Allocate and initialize region info */ cr = malloc(sizeof(*cr), M_BHND, M_NOWAIT); if (cr == NULL) return (NULL); cr->cr_port_type = type; cr->cr_port_num = port; cr->cr_region_num = region; cr->cr_res = NULL; cr->cr_refs = 0; cr->cr_act_refs = 0; error = bhnd_get_region_addr(sc->dev, type, port, region, &cr->cr_addr, &cr->cr_count); if (error) { device_printf(sc->dev, "fetching chipc region address failed: %d\n", error); goto failed; } cr->cr_end = cr->cr_addr + cr->cr_count - 1; /* Fetch default resource ID for this region. Not all regions have an * assigned rid, in which case this will return -1 */ cr->cr_rid = bhnd_get_port_rid(sc->dev, type, port, region); return (cr); failed: device_printf(sc->dev, "chipc region alloc failed for %s%u.%u\n", bhnd_port_type_name(type), port, region); free(cr, M_BHND); return (NULL); } /** * Deallocate the given region record and its associated resource, if any. * * @param sc Driver instance state. * @param cr Region record to be deallocated. */ void chipc_free_region(struct chipc_softc *sc, struct chipc_region *cr) { KASSERT(cr->cr_refs == 0, ("chipc %s%u.%u region has %u active references", bhnd_port_type_name(cr->cr_port_type), cr->cr_port_num, cr->cr_region_num, cr->cr_refs)); if (cr->cr_res != NULL) { bhnd_release_resource(sc->dev, SYS_RES_MEMORY, cr->cr_res_rid, cr->cr_res); } free(cr, M_BHND); } /** * Locate the region mapping the given range, if any. Returns NULL if no * valid region is found. * * @param sc Driver instance state. * @param start start of address range. * @param end end of address range. */ struct chipc_region * chipc_find_region(struct chipc_softc *sc, rman_res_t start, rman_res_t end) { struct chipc_region *cr; if (start > end) return (NULL); STAILQ_FOREACH(cr, &sc->mem_regions, cr_link) { if (start < cr->cr_addr || end > cr->cr_end) continue; /* Found */ return (cr); } /* Not found */ return (NULL); } /** * Locate a region mapping by its bhnd-assigned resource id (as returned by * bhnd_get_port_rid). * * @param sc Driver instance state. * @param rid Resource ID to query for. */ struct chipc_region * chipc_find_region_by_rid(struct chipc_softc *sc, int rid) { struct chipc_region *cr; int port_rid; STAILQ_FOREACH(cr, &sc->mem_regions, cr_link) { port_rid = bhnd_get_port_rid(sc->dev, cr->cr_port_type, cr->cr_port_num, cr->cr_region_num); if (port_rid == -1 || port_rid != rid) continue; /* Found */ return (cr); } /* Not found */ return (NULL); } /** * Retain a reference to a chipc_region, allocating and activating the * backing resource as required. * * @param sc chipc driver instance state * @param cr region to retain. * @param flags specify RF_ALLOCATED to retain an allocation reference, * RF_ACTIVE to retain an activation reference. */ int chipc_retain_region(struct chipc_softc *sc, struct chipc_region *cr, int flags) { int error; KASSERT(!(flags &~ (RF_ACTIVE|RF_ALLOCATED)), ("unsupported flags")); CHIPC_LOCK(sc); /* Handle allocation */ if (flags & RF_ALLOCATED) { /* If this is the first reference, allocate the resource */ if (cr->cr_refs == 0) { KASSERT(cr->cr_res == NULL, ("non-NULL resource has refcount")); /* Fetch initial resource ID */ if ((cr->cr_res_rid = cr->cr_rid) == -1) { CHIPC_UNLOCK(sc); return (EINVAL); } /* Allocate resource */ cr->cr_res = bhnd_alloc_resource(sc->dev, SYS_RES_MEMORY, &cr->cr_res_rid, cr->cr_addr, cr->cr_end, cr->cr_count, RF_SHAREABLE); if (cr->cr_res == NULL) { CHIPC_UNLOCK(sc); return (ENXIO); } } /* Increment allocation refcount */ cr->cr_refs++; } /* Handle activation */ if (flags & RF_ACTIVE) { KASSERT(cr->cr_refs > 0, ("cannot activate unallocated resource")); /* If this is the first reference, activate the resource */ if (cr->cr_act_refs == 0) { error = bhnd_activate_resource(sc->dev, SYS_RES_MEMORY, cr->cr_res_rid, cr->cr_res); if (error) { /* Drop any allocation reference acquired * above */ CHIPC_UNLOCK(sc); chipc_release_region(sc, cr, flags &~ RF_ACTIVE); return (error); } } /* Increment activation refcount */ cr->cr_act_refs++; } CHIPC_UNLOCK(sc); return (0); } /** * Release a reference to a chipc_region, deactivating and releasing the * backing resource if the reference count hits zero. * * @param sc chipc driver instance state * @param cr region to retain. * @param flags specify RF_ALLOCATED to release an allocation reference, * RF_ACTIVE to release an activation reference. */ int chipc_release_region(struct chipc_softc *sc, struct chipc_region *cr, int flags) { int error; CHIPC_LOCK(sc); error = 0; KASSERT(cr->cr_res != NULL, ("release on NULL region resource")); if (flags & RF_ACTIVE) { KASSERT(cr->cr_act_refs > 0, ("RF_ACTIVE over-released")); KASSERT(cr->cr_act_refs <= cr->cr_refs, ("RF_ALLOCATED released with RF_ACTIVE held")); /* If this is the last reference, deactivate the resource */ if (cr->cr_act_refs == 1) { error = bhnd_deactivate_resource(sc->dev, SYS_RES_MEMORY, cr->cr_res_rid, cr->cr_res); if (error) goto done; } /* Drop our activation refcount */ cr->cr_act_refs--; } if (flags & RF_ALLOCATED) { KASSERT(cr->cr_refs > 0, ("overrelease of refs")); /* If this is the last reference, release the resource */ if (cr->cr_refs == 1) { error = bhnd_release_resource(sc->dev, SYS_RES_MEMORY, cr->cr_res_rid, cr->cr_res); if (error) goto done; cr->cr_res = NULL; } /* Drop our allocation refcount */ cr->cr_refs--; } done: CHIPC_UNLOCK(sc); return (error); }