/*- * SPDX-License-Identifier: ISC * * Copyright (c) 2008-2009 Sam Leffler, Errno Consulting * Copyright (c) 2008 Atheros Communications, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include "opt_ah.h" #include "ah.h" #include "ah_internal.h" #include "ah_devid.h" #include "ah_eeprom_v14.h" /* XXX for tx/rx gain */ #include "ah_eeprom_9287.h" #include "ar9002/ar9280.h" #include "ar9002/ar9287.h" #include "ar5416/ar5416reg.h" #include "ar5416/ar5416phy.h" #include "ar9002/ar9287_cal.h" #include "ar9002/ar9287_reset.h" #include "ar9002/ar9287_olc.h" #include "ar9002/ar9287.ini" static const HAL_PERCAL_DATA ar9287_iq_cal = { /* single sample */ .calName = "IQ", .calType = IQ_MISMATCH_CAL, .calNumSamples = MIN_CAL_SAMPLES, .calCountMax = PER_MAX_LOG_COUNT, .calCollect = ar5416IQCalCollect, .calPostProc = ar5416IQCalibration }; static const HAL_PERCAL_DATA ar9287_adc_gain_cal = { /* single sample */ .calName = "ADC Gain", .calType = ADC_GAIN_CAL, .calNumSamples = MIN_CAL_SAMPLES, .calCountMax = PER_MIN_LOG_COUNT, .calCollect = ar5416AdcGainCalCollect, .calPostProc = ar5416AdcGainCalibration }; static const HAL_PERCAL_DATA ar9287_adc_dc_cal = { /* single sample */ .calName = "ADC DC", .calType = ADC_DC_CAL, .calNumSamples = MIN_CAL_SAMPLES, .calCountMax = PER_MIN_LOG_COUNT, .calCollect = ar5416AdcDcCalCollect, .calPostProc = ar5416AdcDcCalibration }; static const HAL_PERCAL_DATA ar9287_adc_init_dc_cal = { .calName = "ADC Init DC", .calType = ADC_DC_INIT_CAL, .calNumSamples = MIN_CAL_SAMPLES, .calCountMax = INIT_LOG_COUNT, .calCollect = ar5416AdcDcCalCollect, .calPostProc = ar5416AdcDcCalibration }; static void ar9287ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore, HAL_BOOL power_off); static void ar9287DisablePCIE(struct ath_hal *ah); static HAL_BOOL ar9287FillCapabilityInfo(struct ath_hal *ah); static void ar9287WriteIni(struct ath_hal *ah, const struct ieee80211_channel *chan); static void ar9287AniSetup(struct ath_hal *ah) { /* * These are the parameters from the AR5416 ANI code; * they likely need quite a bit of adjustment for the * AR9287. */ static const struct ar5212AniParams aniparams = { .maxNoiseImmunityLevel = 4, /* levels 0..4 */ .totalSizeDesired = { -55, -55, -55, -55, -62 }, .coarseHigh = { -14, -14, -14, -14, -12 }, .coarseLow = { -64, -64, -64, -64, -70 }, .firpwr = { -78, -78, -78, -78, -80 }, .maxSpurImmunityLevel = 7, .cycPwrThr1 = { 2, 4, 6, 8, 10, 12, 14, 16 }, .maxFirstepLevel = 2, /* levels 0..2 */ .firstep = { 0, 4, 8 }, .ofdmTrigHigh = 500, .ofdmTrigLow = 200, .cckTrigHigh = 200, .cckTrigLow = 100, .rssiThrHigh = 40, .rssiThrLow = 7, .period = 100, }; /* NB: disable ANI noise immmunity for reliable RIFS rx */ AH5416(ah)->ah_ani_function &= ~ HAL_ANI_NOISE_IMMUNITY_LEVEL; /* NB: ANI is not enabled yet */ ar5416AniAttach(ah, &aniparams, &aniparams, AH_TRUE); } /* * Attach for an AR9287 part. */ static struct ath_hal * ar9287Attach(uint16_t devid, HAL_SOFTC sc, HAL_BUS_TAG st, HAL_BUS_HANDLE sh, uint16_t *eepromdata, HAL_OPS_CONFIG *ah_config, HAL_STATUS *status) { struct ath_hal_9287 *ahp9287; struct ath_hal_5212 *ahp; struct ath_hal *ah; uint32_t val; HAL_STATUS ecode; HAL_BOOL rfStatus; int8_t pwr_table_offset; HALDEBUG(AH_NULL, HAL_DEBUG_ATTACH, "%s: sc %p st %p sh %p\n", __func__, sc, (void*) st, (void*) sh); /* NB: memory is returned zero'd */ ahp9287 = ath_hal_malloc(sizeof (struct ath_hal_9287)); if (ahp9287 == AH_NULL) { HALDEBUG(AH_NULL, HAL_DEBUG_ANY, "%s: cannot allocate memory for state block\n", __func__); *status = HAL_ENOMEM; return AH_NULL; } ahp = AH5212(ahp9287); ah = &ahp->ah_priv.h; ar5416InitState(AH5416(ah), devid, sc, st, sh, status); if (eepromdata != AH_NULL) { AH_PRIVATE(ah)->ah_eepromRead = ath_hal_EepromDataRead; AH_PRIVATE(ah)->ah_eepromWrite = NULL; ah->ah_eepromdata = eepromdata; } /* XXX override with 9280 specific state */ /* override 5416 methods for our needs */ AH5416(ah)->ah_initPLL = ar9280InitPLL; ah->ah_setAntennaSwitch = ar9287SetAntennaSwitch; ah->ah_configPCIE = ar9287ConfigPCIE; ah->ah_disablePCIE = ar9287DisablePCIE; AH5416(ah)->ah_cal.iqCalData.calData = &ar9287_iq_cal; AH5416(ah)->ah_cal.adcGainCalData.calData = &ar9287_adc_gain_cal; AH5416(ah)->ah_cal.adcDcCalData.calData = &ar9287_adc_dc_cal; AH5416(ah)->ah_cal.adcDcCalInitData.calData = &ar9287_adc_init_dc_cal; /* Better performance without ADC Gain Calibration */ AH5416(ah)->ah_cal.suppCals = ADC_DC_CAL | IQ_MISMATCH_CAL; AH5416(ah)->ah_spurMitigate = ar9280SpurMitigate; AH5416(ah)->ah_writeIni = ar9287WriteIni; ah->ah_setTxPower = ar9287SetTransmitPower; ah->ah_setBoardValues = ar9287SetBoardValues; AH5416(ah)->ah_olcInit = ar9287olcInit; AH5416(ah)->ah_olcTempCompensation = ar9287olcTemperatureCompensation; //AH5416(ah)->ah_setPowerCalTable = ar9287SetPowerCalTable; AH5416(ah)->ah_cal_initcal = ar9287InitCalHardware; AH5416(ah)->ah_cal_pacal = ar9287PACal; /* XXX NF calibration */ /* XXX Ini override? (IFS vars - since the kiwi mac clock is faster?) */ /* XXX what else is kiwi-specific in the radio/calibration pathway? */ AH5416(ah)->ah_rx_chainmask = AR9287_DEFAULT_RXCHAINMASK; AH5416(ah)->ah_tx_chainmask = AR9287_DEFAULT_TXCHAINMASK; if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON)) { /* reset chip */ HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't reset chip\n", __func__); ecode = HAL_EIO; goto bad; } if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't wakeup chip\n", __func__); ecode = HAL_EIO; goto bad; } /* Read Revisions from Chips before taking out of reset */ val = OS_REG_READ(ah, AR_SREV); HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s: ID 0x%x VERSION 0x%x TYPE 0x%x REVISION 0x%x\n", __func__, MS(val, AR_XSREV_ID), MS(val, AR_XSREV_VERSION), MS(val, AR_XSREV_TYPE), MS(val, AR_XSREV_REVISION)); /* NB: include chip type to differentiate from pre-Sowl versions */ AH_PRIVATE(ah)->ah_macVersion = (val & AR_XSREV_VERSION) >> AR_XSREV_TYPE_S; AH_PRIVATE(ah)->ah_macRev = MS(val, AR_XSREV_REVISION); AH_PRIVATE(ah)->ah_ispcie = (val & AR_XSREV_TYPE_HOST_MODE) == 0; /* Don't support Kiwi < 1.2; those are pre-release chips */ if (! AR_SREV_KIWI_12_OR_LATER(ah)) { ath_hal_printf(ah, "[ath]: Kiwi < 1.2 is not supported\n"); ecode = HAL_EIO; goto bad; } /* setup common ini data; rf backends handle remainder */ HAL_INI_INIT(&ahp->ah_ini_modes, ar9287Modes_9287_1_1, 6); HAL_INI_INIT(&ahp->ah_ini_common, ar9287Common_9287_1_1, 2); /* If pcie_clock_req */ HAL_INI_INIT(&AH5416(ah)->ah_ini_pcieserdes, ar9287PciePhy_clkreq_always_on_L1_9287_1_1, 2); /* XXX WoW ini values */ /* Else */ #if 0 HAL_INI_INIT(&AH5416(ah)->ah_ini_pcieserdes, ar9287PciePhy_clkreq_off_L1_9287_1_1, 2); #endif /* Initialise Japan arrays */ HAL_INI_INIT(&ahp9287->ah_ini_cckFirNormal, ar9287Common_normal_cck_fir_coeff_9287_1_1, 2); HAL_INI_INIT(&ahp9287->ah_ini_cckFirJapan2484, ar9287Common_japan_2484_cck_fir_coeff_9287_1_1, 2); ar5416AttachPCIE(ah); ecode = ath_hal_9287EepromAttach(ah); if (ecode != HAL_OK) goto bad; if (!ar5416ChipReset(ah, AH_NULL, HAL_RESET_NORMAL)) { /* reset chip */ HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__); ecode = HAL_EIO; goto bad; } AH_PRIVATE(ah)->ah_phyRev = OS_REG_READ(ah, AR_PHY_CHIP_ID); if (!ar5212ChipTest(ah)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: hardware self-test failed\n", __func__); ecode = HAL_ESELFTEST; goto bad; } /* * Set correct Baseband to analog shift * setting to access analog chips. */ OS_REG_WRITE(ah, AR_PHY(0), 0x00000007); /* Read Radio Chip Rev Extract */ AH_PRIVATE(ah)->ah_analog5GhzRev = ar5416GetRadioRev(ah); switch (AH_PRIVATE(ah)->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR) { case AR_RAD2133_SREV_MAJOR: /* Sowl: 2G/3x3 */ case AR_RAD5133_SREV_MAJOR: /* Sowl: 2+5G/3x3 */ break; default: if (AH_PRIVATE(ah)->ah_analog5GhzRev == 0) { AH_PRIVATE(ah)->ah_analog5GhzRev = AR_RAD5133_SREV_MAJOR; break; } #ifdef AH_DEBUG HALDEBUG(ah, HAL_DEBUG_ANY, "%s: 5G Radio Chip Rev 0x%02X is not supported by " "this driver\n", __func__, AH_PRIVATE(ah)->ah_analog5GhzRev); ecode = HAL_ENOTSUPP; goto bad; #endif } rfStatus = ar9287RfAttach(ah, &ecode); if (!rfStatus) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RF setup failed, status %u\n", __func__, ecode); goto bad; } /* * We only implement open-loop TX power control * for the AR9287 in this codebase. */ if (! ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) { ath_hal_printf(ah, "[ath] AR9287 w/ closed-loop TX power control" " isn't supported.\n"); ecode = HAL_ENOTSUPP; goto bad; } /* * Check whether the power table offset isn't the default. * This can occur with eeprom minor V21 or greater on Merlin. */ (void) ath_hal_eepromGet(ah, AR_EEP_PWR_TABLE_OFFSET, &pwr_table_offset); if (pwr_table_offset != AR5416_PWR_TABLE_OFFSET_DB) ath_hal_printf(ah, "[ath]: default pwr offset: %d dBm != EEPROM pwr offset: %d dBm; curves will be adjusted.\n", AR5416_PWR_TABLE_OFFSET_DB, (int) pwr_table_offset); /* setup rxgain table */ HAL_INI_INIT(&ahp9287->ah_ini_rxgain, ar9287Modes_rx_gain_9287_1_1, 6); /* setup txgain table */ HAL_INI_INIT(&ahp9287->ah_ini_txgain, ar9287Modes_tx_gain_9287_1_1, 6); /* * Got everything we need now to setup the capabilities. */ if (!ar9287FillCapabilityInfo(ah)) { ecode = HAL_EEREAD; goto bad; } ecode = ath_hal_eepromGet(ah, AR_EEP_MACADDR, ahp->ah_macaddr); if (ecode != HAL_OK) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: error getting mac address from EEPROM\n", __func__); goto bad; } /* XXX How about the serial number ? */ /* Read Reg Domain */ AH_PRIVATE(ah)->ah_currentRD = ath_hal_eepromGet(ah, AR_EEP_REGDMN_0, AH_NULL); AH_PRIVATE(ah)->ah_currentRDext = AR9287_RDEXT_DEFAULT; /* * ah_miscMode is populated by ar5416FillCapabilityInfo() * starting from griffin. Set here to make sure that * AR_MISC_MODE_MIC_NEW_LOC_ENABLE is set before a GTK is * placed into hardware. */ if (ahp->ah_miscMode != 0) OS_REG_WRITE(ah, AR_MISC_MODE, OS_REG_READ(ah, AR_MISC_MODE) | ahp->ah_miscMode); ar9287AniSetup(ah); /* Anti Noise Immunity */ /* Setup noise floor min/max/nominal values */ AH5416(ah)->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9287_2GHZ; AH5416(ah)->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9287_2GHZ; AH5416(ah)->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9287_2GHZ; AH5416(ah)->nf_5g.max = AR_PHY_CCA_MAX_GOOD_VAL_9287_5GHZ; AH5416(ah)->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_9287_5GHZ; AH5416(ah)->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9287_5GHZ; ar5416InitNfHistBuff(AH5416(ah)->ah_cal.nfCalHist); HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s: return\n", __func__); return ah; bad: if (ah != AH_NULL) ah->ah_detach(ah); if (status) *status = ecode; return AH_NULL; } static void ar9287ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore, HAL_BOOL power_off) { if (AH_PRIVATE(ah)->ah_ispcie && !restore) { ath_hal_ini_write(ah, &AH5416(ah)->ah_ini_pcieserdes, 1, 0); OS_DELAY(1000); OS_REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); /* Yes, Kiwi uses the Kite PCIe PHY WA */ OS_REG_WRITE(ah, AR_WA, AR9285_WA_DEFAULT); } } static void ar9287DisablePCIE(struct ath_hal *ah) { /* XXX TODO */ } static void ar9287WriteIni(struct ath_hal *ah, const struct ieee80211_channel *chan) { u_int modesIndex, freqIndex; int regWrites = 0; /* Setup the indices for the next set of register array writes */ /* XXX Ignore 11n dynamic mode on the AR5416 for the moment */ if (IEEE80211_IS_CHAN_2GHZ(chan)) { freqIndex = 2; if (IEEE80211_IS_CHAN_HT40(chan)) modesIndex = 3; else if (IEEE80211_IS_CHAN_108G(chan)) modesIndex = 5; else modesIndex = 4; } else { freqIndex = 1; if (IEEE80211_IS_CHAN_HT40(chan) || IEEE80211_IS_CHAN_TURBO(chan)) modesIndex = 2; else modesIndex = 1; } /* Set correct Baseband to analog shift setting to access analog chips. */ OS_REG_WRITE(ah, AR_PHY(0), 0x00000007); OS_REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC); regWrites = ath_hal_ini_write(ah, &AH5212(ah)->ah_ini_modes, modesIndex, regWrites); regWrites = ath_hal_ini_write(ah, &AH9287(ah)->ah_ini_rxgain, modesIndex, regWrites); regWrites = ath_hal_ini_write(ah, &AH9287(ah)->ah_ini_txgain, modesIndex, regWrites); regWrites = ath_hal_ini_write(ah, &AH5212(ah)->ah_ini_common, 1, regWrites); } /* * Fill all software cached or static hardware state information. * Return failure if capabilities are to come from EEPROM and * cannot be read. */ static HAL_BOOL ar9287FillCapabilityInfo(struct ath_hal *ah) { HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps; if (!ar5416FillCapabilityInfo(ah)) return AH_FALSE; pCap->halNumGpioPins = 10; pCap->halWowSupport = AH_TRUE; pCap->halWowMatchPatternExact = AH_TRUE; #if 0 pCap->halWowMatchPatternDword = AH_TRUE; #endif pCap->halCSTSupport = AH_TRUE; pCap->halRifsRxSupport = AH_TRUE; pCap->halRifsTxSupport = AH_TRUE; pCap->halRtsAggrLimit = 64*1024; /* 802.11n max */ pCap->halExtChanDfsSupport = AH_TRUE; pCap->halUseCombinedRadarRssi = AH_TRUE; #if 0 /* XXX bluetooth */ pCap->halBtCoexSupport = AH_TRUE; #endif pCap->halAutoSleepSupport = AH_FALSE; /* XXX? */ pCap->hal4kbSplitTransSupport = AH_FALSE; /* Disable this so Block-ACK works correctly */ pCap->halHasRxSelfLinkedTail = AH_FALSE; pCap->halPSPollBroken = AH_FALSE; pCap->halSpectralScanSupport = AH_TRUE; /* Hardware supports (at least) single-stream STBC TX/RX */ pCap->halRxStbcSupport = 1; pCap->halTxStbcSupport = 1; /* Hardware supports short-GI w/ 20MHz */ pCap->halHTSGI20Support = 1; pCap->halEnhancedDfsSupport = AH_TRUE; return AH_TRUE; } /* * This has been disabled - having the HAL flip chainmasks on/off * when attempting to implement 11n disrupts things. For now, just * leave this flipped off and worry about implementing TX diversity * for legacy and MCS0-15 when 11n is fully functioning. */ HAL_BOOL ar9287SetAntennaSwitch(struct ath_hal *ah, HAL_ANT_SETTING settings) { return AH_TRUE; } static const char* ar9287Probe(uint16_t vendorid, uint16_t devid) { if (vendorid == ATHEROS_VENDOR_ID) { if (devid == AR9287_DEVID_PCI) return "Atheros 9227"; if (devid == AR9287_DEVID_PCIE) return "Atheros 9287"; } return AH_NULL; } AH_CHIP(AR9287, ar9287Probe, ar9287Attach);