.\"- .\" SPDX-License-Identifier: BSD-2-Clause .\" .\" Copyright (c) 2004-2007 .\" Damien Bergamini . All rights reserved. .\" Benjamin Close . All rights reserved. .\" Copyright (c) 2016 Andriy Voskoboinyk .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice unmodified, this list of conditions, and the following .\" disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .Dd October 17, 2024 .Dt WPI 4 .Os .Sh NAME .Nm wpi .Nd Intel PRO/Wireless 3945ABG IEEE 802.11a/b/g network driver .Sh SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: .Bd -ragged -offset indent .Cd "device wpi" .Cd "device wpifw" .Cd "device pci" .Cd "device wlan" .Cd "device wlan_amrr" .Cd "device firmware" .Ed .Pp Alternatively, to load the driver as a module at boot time, place the following line in .Xr loader.conf 5 : .Pp .Dl if_wpi_load="YES" .Sh DESCRIPTION The .Nm driver supports running the Intel PRO/Wireless 3945ABG network adapter in .Cm station , .Cm adhoc , .Cm adhoc-demo , .Cm hostap , and .Cm monitor mode operation. This driver requires the wpifw firmware module and can be configured at runtime with .Xr ifconfig 8 or at boot in .Xr rc.conf 5 . Only one virtual interface may be configured at any time. .Pp The .Nm driver can be configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA-PSK and WPA2-PSK). WPA is the de facto encryption standard for wireless networks. It is strongly recommended that WEP not be used as the sole mechanism to secure wireless communication, due to serious weaknesses in it. The .Nm driver offloads both encryption and decryption of data frames to the hardware for the CCMP cipher. .Sh HARDWARE The .Nm driver provides support for the Intel PRO/Wireless 3945ABG Mini PCIe network adapter. .Sh FILES .Bl -tag -width "/usr/share/doc/legal/intel_wpi.LICENSE" -compact .It Pa /usr/share/doc/legal/intel_wpi.LICENSE .Nm firmware license .El .Sh EXAMPLES Join an existing BSS network (i.e., connect to an access point): .Bd -literal -offset indent ifconfig wlan0 create wlandev wpi0 inet 192.168.0.20 \e netmask 0xffffff00 .Ed .Pp Join a specific BSS network with network name .Ar my_net : .Pp .Dl "ifconfig wlan0 create wlandev wpi0 ssid my_net up" .Pp Join a specific BSS network with 64-bit WEP encryption: .Bd -literal -offset indent ifconfig wlan0 create wlandev wpi0 ssid my_net \e wepmode on wepkey 0x1234567890 weptxkey 1 up .Ed .Pp Create an IBSS network with 128-bit WEP encryption on the channel 4: .Bd -literal -offset indent ifconfig wlan0 create wlandev wpi0 wlanmode adhoc ssid my_net \e wepmode on wepkey 0x01020304050607080910111213 weptxkey 1 \e channel 4 .Ed .Pp Join/create an 802.11b IBSS network with network name .Ar my_net : .Bd -literal -offset indent ifconfig wlan0 create wlandev wpi0 wlanmode adhoc ifconfig wlan0 inet 192.168.0.22 netmask 0xffffff00 ssid my_net \e mode 11b .Ed .Pp Create an 802.11g host-based access point: .Bd -literal -offset indent ifconfig wlan0 create wlandev wpi0 wlanmode hostap ifconfig wlan0 inet 192.168.0.10 netmask 0xffffff00 ssid my_ap \e mode 11g .Ed .Sh DIAGNOSTICS .Bl -diag .It "wpi%d: could not load firmware image '%s'" The driver failed to load the firmware image using the .Xr firmware 9 subsystem. Verify the wpifw firmware module is installed. .It "wpi%d: %s: timeout waiting for adapter to initialize, error %d" The onboard microcontroller failed to initialize in time. This should not happen. .It "wpi%d: %s: could not load boot firmware" An attempt to upload the boot firmware image to the onboard microcontroller failed. This should not happen. .It "wpi%d: device timeout" A frame dispatched to the hardware for transmission did not complete in time. The driver will reset the hardware and continue. This should not happen. .It "wpi%d: scan timeout" Firmware scan command response was not received in time. The driver will reset the hardware and continue. This should not happen. .It "wpi%d: fatal firmware error" The onboard microcontroller crashed for some reason. The driver will reset the hardware and continue. This should not happen. .It "wpi%d: RF switch: radio disabled" The hardware switch controlling the radio is currently turned off. Data transmission is not possible in this state. .It "wpi%d: can't map mem space" The driver was unable to map the device registers into the host address space. This should not happen. .It "wpi%d: can't map interrupt" The driver was unable to allocate an IRQ for the device interrupt. This should not happen. .It "wpi%d: can't establish interrupt, error %d" The driver was unable to install the device interrupt handler. This should not happen. .It "wpi%d: %s: bus_dmamap_load failed, error %d" The driver was unable to map newly allocated mbuf to device visible address space. Contents of currently received frame will be lost. This should not happen. .El .Sh SEE ALSO .Xr pci 4 , .Xr wlan 4 , .Xr wlan_amrr 4 , .Xr wlan_ccmp 4 , .Xr wlan_tkip 4 , .Xr wlan_wep 4 , .Xr wlan_xauth 4 , .Xr networking 7 , .Xr hostapd 8 , .Xr ifconfig 8 , .Xr wpa_supplicant 8 .Sh AUTHORS .An -nosplit The original .Nm driver was written for .Ox by .An Damien Bergamini Aq Mt damien.bergamini@free.fr . .An Benjamin Close Aq Mt benjsc@FreeBSD.org ported .Nm to .Fx . .Sh CAVEATS .Cm Hostap mode is not directly supported by the device; it is implemented through IBSS mode (as a result, DFS/passive channels are not available in this mode). .Pp Powersave may be unstable on some networks .Po results in occasional Sy 'wpi%d: device timeout' No messages Pc ; you can try to disable it to improve device stability.