/* $NetBSD: cpuregs.h,v 1.70 2006/05/15 02:26:54 simonb Exp $ */ /* * SPDX-License-Identifier: BSD-3-Clause * * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Ralph Campbell and Rick Macklem. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)machConst.h 8.1 (Berkeley) 6/10/93 * * machConst.h -- * * Machine dependent constants. * * Copyright (C) 1989 Digital Equipment Corporation. * Permission to use, copy, modify, and distribute this software and * its documentation for any purpose and without fee is hereby granted, * provided that the above copyright notice appears in all copies. * Digital Equipment Corporation makes no representations about the * suitability of this software for any purpose. It is provided "as is" * without express or implied warranty. * * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machConst.h, * v 9.2 89/10/21 15:55:22 jhh Exp SPRITE (DECWRL) * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machAddrs.h, * v 1.2 89/08/15 18:28:21 rab Exp SPRITE (DECWRL) * from: Header: /sprite/src/kernel/vm/ds3100.md/RCS/vmPmaxConst.h, * v 9.1 89/09/18 17:33:00 shirriff Exp SPRITE (DECWRL) */ #ifndef _MIPS_CPUREGS_H_ #define _MIPS_CPUREGS_H_ #ifndef _KVM_MINIDUMP #include #endif /* * Address space. * 32-bit mips CPUS partition their 32-bit address space into four segments: * * kuseg 0x00000000 - 0x7fffffff User virtual mem, mapped * kseg0 0x80000000 - 0x9fffffff Physical memory, cached, unmapped * kseg1 0xa0000000 - 0xbfffffff Physical memory, uncached, unmapped * kseg2 0xc0000000 - 0xffffffff kernel-virtual, mapped * * Caching of mapped addresses is controlled by bits in the TLB entry. */ #define MIPS_KSEG0_LARGEST_PHYS (0x20000000) #define MIPS_KSEG0_PHYS_MASK (0x1fffffff) #define MIPS_XKPHYS_LARGEST_PHYS (0x10000000000) /* 40 bit PA */ #define MIPS_XKPHYS_PHYS_MASK (0x0ffffffffff) #ifndef LOCORE #define MIPS_KUSEG_START 0x00000000 #define MIPS_KSEG0_START ((intptr_t)(int32_t)0x80000000) #define MIPS_KSEG0_END ((intptr_t)(int32_t)0x9fffffff) #define MIPS_KSEG1_START ((intptr_t)(int32_t)0xa0000000) #define MIPS_KSEG1_END ((intptr_t)(int32_t)0xbfffffff) #define MIPS_KSSEG_START ((intptr_t)(int32_t)0xc0000000) #define MIPS_KSSEG_END ((intptr_t)(int32_t)0xdfffffff) #define MIPS_KSEG3_START ((intptr_t)(int32_t)0xe0000000) #define MIPS_KSEG3_END ((intptr_t)(int32_t)0xffffffff) #define MIPS_KSEG2_START MIPS_KSSEG_START #define MIPS_KSEG2_END MIPS_KSSEG_END #endif #define MIPS_PHYS_TO_KSEG0(x) ((uintptr_t)(x) | MIPS_KSEG0_START) #define MIPS_PHYS_TO_KSEG1(x) ((uintptr_t)(x) | MIPS_KSEG1_START) #define MIPS_KSEG0_TO_PHYS(x) ((uintptr_t)(x) & MIPS_KSEG0_PHYS_MASK) #define MIPS_KSEG1_TO_PHYS(x) ((uintptr_t)(x) & MIPS_KSEG0_PHYS_MASK) #define MIPS_IS_KSEG0_ADDR(x) \ (((vm_offset_t)(x) >= MIPS_KSEG0_START) && \ ((vm_offset_t)(x) <= MIPS_KSEG0_END)) #define MIPS_IS_KSEG1_ADDR(x) \ (((vm_offset_t)(x) >= MIPS_KSEG1_START) && \ ((vm_offset_t)(x) <= MIPS_KSEG1_END)) #define MIPS_IS_VALID_PTR(x) (MIPS_IS_KSEG0_ADDR(x) || \ MIPS_IS_KSEG1_ADDR(x)) #define MIPS_PHYS_TO_XKPHYS(cca,x) \ ((0x2ULL << 62) | ((unsigned long long)(cca) << 59) | (x)) #define MIPS_PHYS_TO_XKPHYS_CACHED(x) \ ((0x2ULL << 62) | ((unsigned long long)(MIPS_CCA_CACHED) << 59) | (x)) #define MIPS_PHYS_TO_XKPHYS_UNCACHED(x) \ ((0x2ULL << 62) | ((unsigned long long)(MIPS_CCA_UNCACHED) << 59) | (x)) #define MIPS_XKPHYS_TO_PHYS(x) ((uintptr_t)(x) & MIPS_XKPHYS_PHYS_MASK) #define MIPS_XKPHYS_START 0x8000000000000000 #define MIPS_XKPHYS_END 0xbfffffffffffffff #define MIPS_XUSEG_START 0x0000000000000000 #define MIPS_XUSEG_END 0x0000010000000000 #define MIPS_XKSEG_START 0xc000000000000000 #define MIPS_XKSEG_END 0xc00000ff80000000 #define MIPS_XKSEG_COMPAT32_START 0xffffffff80000000 #define MIPS_XKSEG_COMPAT32_END 0xffffffffffffffff #define MIPS_XKSEG_TO_COMPAT32(va) ((va) & 0xffffffff) #ifdef __mips_n64 #define MIPS_DIRECT_MAPPABLE(pa) 1 #define MIPS_PHYS_TO_DIRECT(pa) MIPS_PHYS_TO_XKPHYS_CACHED(pa) #define MIPS_PHYS_TO_DIRECT_UNCACHED(pa) MIPS_PHYS_TO_XKPHYS_UNCACHED(pa) #define MIPS_DIRECT_TO_PHYS(va) MIPS_XKPHYS_TO_PHYS(va) #else #define MIPS_DIRECT_MAPPABLE(pa) ((pa) < MIPS_KSEG0_LARGEST_PHYS) #define MIPS_PHYS_TO_DIRECT(pa) MIPS_PHYS_TO_KSEG0(pa) #define MIPS_PHYS_TO_DIRECT_UNCACHED(pa) MIPS_PHYS_TO_KSEG1(pa) #define MIPS_DIRECT_TO_PHYS(va) MIPS_KSEG0_TO_PHYS(va) #endif /* CPU dependent mtc0 hazard hook */ #if defined(CPU_CNMIPS) || defined(CPU_RMI) #define COP0_SYNC #elif defined(CPU_NLM) #define COP0_SYNC .word 0xc0 /* ehb */ #elif defined(CPU_SB1) #define COP0_SYNC ssnop; ssnop; ssnop; ssnop; ssnop; ssnop; ssnop; ssnop; ssnop #elif defined(CPU_MIPS24K) || defined(CPU_MIPS34K) || \ defined(CPU_MIPS74K) || defined(CPU_MIPS1004K) || \ defined(CPU_MIPS1074K) || defined(CPU_INTERAPTIV) || \ defined(CPU_PROAPTIV) /* * According to MIPS32tm Architecture for Programmers, Vol.II, rev. 2.00: * "As EHB becomes standard in MIPS implementations, the previous SSNOPs can be * removed, leaving only the EHB". * Also, all MIPS32 Release 2 implementations have the EHB instruction, which * resolves all execution hazards. The same goes for MIPS32 Release 3. */ #define COP0_SYNC .word 0xc0 /* ehb */ #else /* * Pick a reasonable default based on the "typical" spacing described in the * "CP0 Hazards" chapter of MIPS Architecture Book Vol III. */ #define COP0_SYNC ssnop; ssnop; ssnop; ssnop; .word 0xc0; #endif #define COP0_HAZARD_FPUENABLE nop; nop; nop; nop; /* * The bits in the cause register. * * Bits common to r3000 and r4000: * * MIPS_CR_BR_DELAY Exception happened in branch delay slot. * MIPS_CR_COP_ERR Coprocessor error. * MIPS_CR_IP Interrupt pending bits defined below. * (same meaning as in CAUSE register). * MIPS_CR_EXC_CODE The exception type (see exception codes below). * * Differences: * r3k has 4 bits of execption type, r4k has 5 bits. */ #define MIPS_CR_BR_DELAY 0x80000000 #define MIPS_CR_COP_ERR 0x30000000 #define MIPS_CR_EXC_CODE 0x0000007C /* five bits */ #define MIPS_CR_IP 0x0000FF00 #define MIPS_CR_EXC_CODE_SHIFT 2 #define MIPS_CR_COP_ERR_SHIFT 28 /* * The bits in the status register. All bits are active when set to 1. * * R3000 status register fields: * MIPS_SR_COP_USABILITY Control the usability of the four coprocessors. * MIPS_SR_TS TLB shutdown. * * MIPS_SR_INT_IE Master (current) interrupt enable bit. * * Differences: * r3k has cache control is via frobbing SR register bits, whereas the * r4k cache control is via explicit instructions. * r3k has a 3-entry stack of kernel/user bits, whereas the * r4k has kernel/supervisor/user. */ #define MIPS_SR_COP_USABILITY 0xf0000000 #define MIPS_SR_COP_0_BIT 0x10000000 #define MIPS_SR_COP_1_BIT 0x20000000 #define MIPS_SR_COP_2_BIT 0x40000000 /* r4k and r3k differences, see below */ #define MIPS_SR_MX 0x01000000 /* MIPS64 */ #define MIPS_SR_PX 0x00800000 /* MIPS64 */ #define MIPS_SR_BEV 0x00400000 /* Use boot exception vector */ #define MIPS_SR_TS 0x00200000 #define MIPS_SR_DE 0x00010000 #define MIPS_SR_INT_IE 0x00000001 /*#define MIPS_SR_MBZ 0x0f8000c0*/ /* Never used, true for r3k */ #define MIPS_SR_INT_MASK 0x0000ff00 /* * R4000 status register bit definitions, * where different from r2000/r3000. */ #define MIPS_SR_XX 0x80000000 #define MIPS_SR_RP 0x08000000 #define MIPS_SR_FR 0x04000000 #define MIPS_SR_RE 0x02000000 #define MIPS_SR_DIAG_DL 0x01000000 /* QED 52xx */ #define MIPS_SR_DIAG_IL 0x00800000 /* QED 52xx */ #define MIPS_SR_SR 0x00100000 #define MIPS_SR_NMI 0x00080000 /* MIPS32/64 */ #define MIPS_SR_DIAG_CH 0x00040000 #define MIPS_SR_DIAG_CE 0x00020000 #define MIPS_SR_DIAG_PE 0x00010000 #define MIPS_SR_EIE 0x00010000 /* TX79/R5900 */ #define MIPS_SR_KX 0x00000080 #define MIPS_SR_SX 0x00000040 #define MIPS_SR_UX 0x00000020 #define MIPS_SR_KSU_MASK 0x00000018 #define MIPS_SR_KSU_USER 0x00000010 #define MIPS_SR_KSU_SUPER 0x00000008 #define MIPS_SR_KSU_KERNEL 0x00000000 #define MIPS_SR_ERL 0x00000004 #define MIPS_SR_EXL 0x00000002 /* * The interrupt masks. * If a bit in the mask is 1 then the interrupt is enabled (or pending). */ #define MIPS_INT_MASK 0xff00 #define MIPS_INT_MASK_5 0x8000 #define MIPS_INT_MASK_4 0x4000 #define MIPS_INT_MASK_3 0x2000 #define MIPS_INT_MASK_2 0x1000 #define MIPS_INT_MASK_1 0x0800 #define MIPS_INT_MASK_0 0x0400 #define MIPS_HARD_INT_MASK 0xfc00 #define MIPS_SOFT_INT_MASK_1 0x0200 #define MIPS_SOFT_INT_MASK_0 0x0100 /* * The bits in the MIPS3 config register. * * bit 0..5: R/W, Bit 6..31: R/O */ /* kseg0 coherency algorithm - see MIPS3_TLB_ATTR values */ #define MIPS_CONFIG_K0_MASK 0x00000007 /* * R/W Update on Store Conditional * 0: Store Conditional uses coherency algorithm specified by TLB * 1: Store Conditional uses cacheable coherent update on write */ #define MIPS_CONFIG_CU 0x00000008 #define MIPS_CONFIG_DB 0x00000010 /* Primary D-cache line size */ #define MIPS_CONFIG_IB 0x00000020 /* Primary I-cache line size */ #define MIPS_CONFIG_CACHE_L1_LSIZE(config, bit) \ (((config) & (bit)) ? 32 : 16) #define MIPS_CONFIG_DC_MASK 0x000001c0 /* Primary D-cache size */ #define MIPS_CONFIG_DC_SHIFT 6 #define MIPS_CONFIG_IC_MASK 0x00000e00 /* Primary I-cache size */ #define MIPS_CONFIG_IC_SHIFT 9 #define MIPS_CONFIG_C_DEFBASE 0x1000 /* default base 2^12 */ /* Cache size mode indication: available only on Vr41xx CPUs */ #define MIPS_CONFIG_CS 0x00001000 #define MIPS_CONFIG_C_4100BASE 0x0400 /* base is 2^10 if CS=1 */ #define MIPS_CONFIG_CACHE_SIZE(config, mask, base, shift) \ ((base) << (((config) & (mask)) >> (shift))) /* External cache enable: Controls L2 for R5000/Rm527x and L3 for Rm7000 */ #define MIPS_CONFIG_SE 0x00001000 /* Block ordering: 0: sequential, 1: sub-block */ #define MIPS_CONFIG_EB 0x00002000 /* ECC mode - 0: ECC mode, 1: parity mode */ #define MIPS_CONFIG_EM 0x00004000 /* BigEndianMem - 0: kernel and memory are little endian, 1: big endian */ #define MIPS_CONFIG_BE 0x00008000 /* Dirty Shared coherency state - 0: enabled, 1: disabled */ #define MIPS_CONFIG_SM 0x00010000 /* Secondary Cache - 0: present, 1: not present */ #define MIPS_CONFIG_SC 0x00020000 /* System Port width - 0: 64-bit, 1: 32-bit (QED RM523x), 2,3: reserved */ #define MIPS_CONFIG_EW_MASK 0x000c0000 #define MIPS_CONFIG_EW_SHIFT 18 /* Secondary Cache port width - 0: 128-bit data path to S-cache, 1: reserved */ #define MIPS_CONFIG_SW 0x00100000 /* Split Secondary Cache Mode - 0: I/D mixed, 1: I/D separated by SCAddr(17) */ #define MIPS_CONFIG_SS 0x00200000 /* Secondary Cache line size */ #define MIPS_CONFIG_SB_MASK 0x00c00000 #define MIPS_CONFIG_SB_SHIFT 22 #define MIPS_CONFIG_CACHE_L2_LSIZE(config) \ (0x10 << (((config) & MIPS_CONFIG_SB_MASK) >> MIPS_CONFIG_SB_SHIFT)) /* Write back data rate */ #define MIPS_CONFIG_EP_MASK 0x0f000000 #define MIPS_CONFIG_EP_SHIFT 24 /* System clock ratio - this value is CPU dependent */ #define MIPS_CONFIG_EC_MASK 0x70000000 #define MIPS_CONFIG_EC_SHIFT 28 /* Master-Checker Mode - 1: enabled */ #define MIPS_CONFIG_CM 0x80000000 /* * The bits in the MIPS4 config register. */ /* * Location of exception vectors. * * Common vectors: reset and UTLB miss. */ #define MIPS_RESET_EXC_VEC ((intptr_t)(int32_t)0xBFC00000) #define MIPS_UTLB_MISS_EXC_VEC ((intptr_t)(int32_t)0x80000000) /* * MIPS-III exception vectors */ #define MIPS_XTLB_MISS_EXC_VEC ((intptr_t)(int32_t)0x80000080) #define MIPS_CACHE_ERR_EXC_VEC ((intptr_t)(int32_t)0x80000100) #define MIPS_GEN_EXC_VEC ((intptr_t)(int32_t)0x80000180) /* * MIPS32/MIPS64 (and some MIPS3) dedicated interrupt vector. */ #define MIPS_INTR_EXC_VEC 0x80000200 /* * Coprocessor 0 registers: * * v--- width for mips I,III,32,64 * (3=32bit, 6=64bit, i=impl dep) * 0 MIPS_COP_0_TLB_INDEX 3333 TLB Index. * 1 MIPS_COP_0_TLB_RANDOM 3333 TLB Random. * 2 MIPS_COP_0_TLB_LO0 .636 r4k TLB entry low. * 3 MIPS_COP_0_TLB_LO1 .636 r4k TLB entry low, extended. * 4 MIPS_COP_0_TLB_CONTEXT 3636 TLB Context. * 4/2 MIPS_COP_0_USERLOCAL ..36 UserLocal. * 5 MIPS_COP_0_TLB_PG_MASK .333 TLB Page Mask register. * 6 MIPS_COP_0_TLB_WIRED .333 Wired TLB number. * 7 MIPS_COP_0_HWRENA ..33 rdHWR Enable. * 8 MIPS_COP_0_BAD_VADDR 3636 Bad virtual address. * 9 MIPS_COP_0_COUNT .333 Count register. * 10 MIPS_COP_0_TLB_HI 3636 TLB entry high. * 11 MIPS_COP_0_COMPARE .333 Compare (against Count). * 12 MIPS_COP_0_STATUS 3333 Status register. * 12/1 MIPS_COP_0_INTCTL ..33 Interrupt setup (MIPS32/64 r2). * 13 MIPS_COP_0_CAUSE 3333 Exception cause register. * 14 MIPS_COP_0_EXC_PC 3636 Exception PC. * 15 MIPS_COP_0_PRID 3333 Processor revision identifier. * 16 MIPS_COP_0_CONFIG 3333 Configuration register. * 16/1 MIPS_COP_0_CONFIG1 ..33 Configuration register 1. * 16/2 MIPS_COP_0_CONFIG2 ..33 Configuration register 2. * 16/3 MIPS_COP_0_CONFIG3 ..33 Configuration register 3. * 16/4 MIPS_COP_0_CONFIG4 ..33 Configuration register 4. * 17 MIPS_COP_0_LLADDR .336 Load Linked Address. * 18 MIPS_COP_0_WATCH_LO .336 WatchLo register. * 19 MIPS_COP_0_WATCH_HI .333 WatchHi register. * 20 MIPS_COP_0_TLB_XCONTEXT .6.6 TLB XContext register. * 23 MIPS_COP_0_DEBUG .... Debug JTAG register. * 24 MIPS_COP_0_DEPC .... DEPC JTAG register. * 25 MIPS_COP_0_PERFCNT ..36 Performance Counter register. * 26 MIPS_COP_0_ECC .3ii ECC / Error Control register. * 27 MIPS_COP_0_CACHE_ERR .3ii Cache Error register. * 28/0 MIPS_COP_0_TAG_LO .3ii Cache TagLo register (instr). * 28/1 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (instr). * 28/2 MIPS_COP_0_TAG_LO ..ii Cache TagLo register (data). * 28/3 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (data). * 29/0 MIPS_COP_0_TAG_HI .3ii Cache TagHi register (instr). * 29/1 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (instr). * 29/2 MIPS_COP_0_TAG_HI ..ii Cache TagHi register (data). * 29/3 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (data). * 30 MIPS_COP_0_ERROR_PC .636 Error EPC register. * 31 MIPS_COP_0_DESAVE .... DESAVE JTAG register. */ /* Deal with inclusion from an assembly file. */ #if defined(_LOCORE) || defined(LOCORE) #define _(n) $n #else #define _(n) n #endif #define MIPS_COP_0_TLB_INDEX _(0) #define MIPS_COP_0_TLB_RANDOM _(1) /* Name and meaning of TLB bits for $2 differ on r3k and r4k. */ #define MIPS_COP_0_TLB_CONTEXT _(4) /* $5 and $6 new with MIPS-III */ #define MIPS_COP_0_BAD_VADDR _(8) #define MIPS_COP_0_TLB_HI _(10) #define MIPS_COP_0_STATUS _(12) #define MIPS_COP_0_CAUSE _(13) #define MIPS_COP_0_EXC_PC _(14) #define MIPS_COP_0_PRID _(15) /* MIPS-III */ #define MIPS_COP_0_TLB_LO0 _(2) #define MIPS_COP_0_TLB_LO1 _(3) #define MIPS_COP_0_TLB_PG_MASK _(5) #define MIPS_COP_0_TLB_WIRED _(6) #define MIPS_COP_0_COUNT _(9) #define MIPS_COP_0_COMPARE _(11) #ifdef CPU_XBURST #define MIPS_COP_0_XBURST_C12 _(12) #endif #define MIPS_COP_0_CONFIG _(16) #define MIPS_COP_0_LLADDR _(17) #define MIPS_COP_0_WATCH_LO _(18) #define MIPS_COP_0_WATCH_HI _(19) #define MIPS_COP_0_TLB_XCONTEXT _(20) #ifdef CPU_XBURST #define MIPS_COP_0_XBURST_MBOX _(20) #endif #define MIPS_COP_0_ECC _(26) #define MIPS_COP_0_CACHE_ERR _(27) #define MIPS_COP_0_TAG_LO _(28) #define MIPS_COP_0_TAG_HI _(29) #define MIPS_COP_0_ERROR_PC _(30) /* MIPS32/64 */ #define MIPS_COP_0_USERLOCAL _(4) /* sel 2 is userlevel register */ #define MIPS_COP_0_HWRENA _(7) #define MIPS_COP_0_INTCTL _(12) #define MIPS_COP_0_DEBUG _(23) #define MIPS_COP_0_DEPC _(24) #define MIPS_COP_0_PERFCNT _(25) #define MIPS_COP_0_DATA_LO _(28) #define MIPS_COP_0_DATA_HI _(29) #define MIPS_COP_0_DESAVE _(31) /* MIPS32 Config register definitions */ #define MIPS_MMU_NONE 0x00 /* No MMU present */ #define MIPS_MMU_TLB 0x01 /* Standard TLB */ #define MIPS_MMU_BAT 0x02 /* Standard BAT */ #define MIPS_MMU_FIXED 0x03 /* Standard fixed mapping */ /* * IntCtl Register Fields */ #define MIPS_INTCTL_IPTI_MASK 0xE0000000 /* bits 31..29 timer intr # */ #define MIPS_INTCTL_IPTI_SHIFT 29 #define MIPS_INTCTL_IPPCI_MASK 0x1C000000 /* bits 26..29 perf counter intr # */ #define MIPS_INTCTL_IPPCI_SHIFT 26 #define MIPS_INTCTL_VS_MASK 0x000001F0 /* bits 5..9 vector spacing */ #define MIPS_INTCTL_VS_SHIFT 4 /* * Config Register Fields * (See "MIPS Architecture for Programmers Volume III", MD00091, Table 9.39) */ #define MIPS_CONFIG0_M 0x80000000 /* Flag: Config1 is present. */ #define MIPS_CONFIG0_MT_MASK 0x00000380 /* bits 9..7 MMU Type */ #define MIPS_CONFIG0_MT_SHIFT 7 #define MIPS_CONFIG0_BE 0x00008000 /* data is big-endian */ #define MIPS_CONFIG0_VI 0x00000008 /* inst cache is virtual */ /* * Config1 Register Fields * (See "MIPS Architecture for Programmers Volume III", MD00091, Table 9-1) */ #define MIPS_CONFIG1_M 0x80000000 /* Flag: Config2 is present. */ #define MIPS_CONFIG1_TLBSZ_MASK 0x7E000000 /* bits 30..25 # tlb entries minus one */ #define MIPS_CONFIG1_TLBSZ_SHIFT 25 #define MIPS_CONFIG1_IS_MASK 0x01C00000 /* bits 24..22 icache sets per way */ #define MIPS_CONFIG1_IS_SHIFT 22 #define MIPS_CONFIG1_IL_MASK 0x00380000 /* bits 21..19 icache line size */ #define MIPS_CONFIG1_IL_SHIFT 19 #define MIPS_CONFIG1_IA_MASK 0x00070000 /* bits 18..16 icache associativity */ #define MIPS_CONFIG1_IA_SHIFT 16 #define MIPS_CONFIG1_DS_MASK 0x0000E000 /* bits 15..13 dcache sets per way */ #define MIPS_CONFIG1_DS_SHIFT 13 #define MIPS_CONFIG1_DL_MASK 0x00001C00 /* bits 12..10 dcache line size */ #define MIPS_CONFIG1_DL_SHIFT 10 #define MIPS_CONFIG1_DA_MASK 0x00000380 /* bits 9.. 7 dcache associativity */ #define MIPS_CONFIG1_DA_SHIFT 7 #define MIPS_CONFIG1_LOWBITS 0x0000007F #define MIPS_CONFIG1_C2 0x00000040 /* Coprocessor 2 implemented */ #define MIPS_CONFIG1_MD 0x00000020 /* MDMX ASE implemented (MIPS64) */ #define MIPS_CONFIG1_PC 0x00000010 /* Performance counters implemented */ #define MIPS_CONFIG1_WR 0x00000008 /* Watch registers implemented */ #define MIPS_CONFIG1_CA 0x00000004 /* MIPS16e ISA implemented */ #define MIPS_CONFIG1_EP 0x00000002 /* EJTAG implemented */ #define MIPS_CONFIG1_FP 0x00000001 /* FPU implemented */ #define MIPS_CONFIG2_SA_SHIFT 0 /* Secondary cache associativity */ #define MIPS_CONFIG2_SA_MASK 0xf #define MIPS_CONFIG2_SL_SHIFT 4 /* Secondary cache line size */ #define MIPS_CONFIG2_SL_MASK 0xf #define MIPS_CONFIG2_SS_SHIFT 8 /* Secondary cache sets per way */ #define MIPS_CONFIG2_SS_MASK 0xf #define MIPS_CONFIG3_CMGCR_MASK (1 << 29) /* Coherence manager present */ /* * Config2 Register Fields * (See "MIPS Architecture for Programmers Volume III", MD00091, Table 9.40) */ #define MIPS_CONFIG2_M 0x80000000 /* Flag: Config3 is present. */ /* * Config3 Register Fields * (See "MIPS Architecture for Programmers Volume III", MD00091, Table 9.41) */ #define MIPS_CONFIG3_M 0x80000000 /* Flag: Config4 is present */ #define MIPS_CONFIG3_ULR 0x00002000 /* UserLocal reg implemented */ #define MIPS_CONFIG4_MMUSIZEEXT 0x000000FF /* bits 7.. 0 MMU Size Extension */ #define MIPS_CONFIG4_MMUEXTDEF 0x0000C000 /* bits 15.14 MMU Extension Definition */ #define MIPS_CONFIG4_MMUEXTDEF_MMUSIZEEXT 0x00004000 /* This values denotes CONFIG4 bits */ /* * Values for the code field in a break instruction. */ #define MIPS_BREAK_INSTR 0x0000000d #define MIPS_BREAK_VAL_MASK 0x03ff0000 #define MIPS_BREAK_VAL_SHIFT 16 #define MIPS_BREAK_KDB_VAL 512 #define MIPS_BREAK_SSTEP_VAL 513 #define MIPS_BREAK_BRKPT_VAL 514 #define MIPS_BREAK_SOVER_VAL 515 #define MIPS_BREAK_DDB_VAL 516 #define MIPS_BREAK_KDB (MIPS_BREAK_INSTR | \ (MIPS_BREAK_KDB_VAL << MIPS_BREAK_VAL_SHIFT)) #define MIPS_BREAK_SSTEP (MIPS_BREAK_INSTR | \ (MIPS_BREAK_SSTEP_VAL << MIPS_BREAK_VAL_SHIFT)) #define MIPS_BREAK_BRKPT (MIPS_BREAK_INSTR | \ (MIPS_BREAK_BRKPT_VAL << MIPS_BREAK_VAL_SHIFT)) #define MIPS_BREAK_SOVER (MIPS_BREAK_INSTR | \ (MIPS_BREAK_SOVER_VAL << MIPS_BREAK_VAL_SHIFT)) #define MIPS_BREAK_DDB (MIPS_BREAK_INSTR | \ (MIPS_BREAK_DDB_VAL << MIPS_BREAK_VAL_SHIFT)) /* * Mininum and maximum cache sizes. */ #define MIPS_MIN_CACHE_SIZE (16 * 1024) #define MIPS_MAX_CACHE_SIZE (256 * 1024) #define MIPS_MAX_PCACHE_SIZE (32 * 1024) /* max. primary cache size */ /* * The floating point version and status registers. */ #define MIPS_FPU_ID $0 #define MIPS_FPU_CSR $31 /* * The floating point coprocessor status register bits. */ #define MIPS_FPU_ROUNDING_BITS 0x00000003 #define MIPS_FPU_ROUND_RN 0x00000000 #define MIPS_FPU_ROUND_RZ 0x00000001 #define MIPS_FPU_ROUND_RP 0x00000002 #define MIPS_FPU_ROUND_RM 0x00000003 #define MIPS_FPU_STICKY_BITS 0x0000007c #define MIPS_FPU_STICKY_INEXACT 0x00000004 #define MIPS_FPU_STICKY_UNDERFLOW 0x00000008 #define MIPS_FPU_STICKY_OVERFLOW 0x00000010 #define MIPS_FPU_STICKY_DIV0 0x00000020 #define MIPS_FPU_STICKY_INVALID 0x00000040 #define MIPS_FPU_ENABLE_BITS 0x00000f80 #define MIPS_FPU_ENABLE_INEXACT 0x00000080 #define MIPS_FPU_ENABLE_UNDERFLOW 0x00000100 #define MIPS_FPU_ENABLE_OVERFLOW 0x00000200 #define MIPS_FPU_ENABLE_DIV0 0x00000400 #define MIPS_FPU_ENABLE_INVALID 0x00000800 #define MIPS_FPU_EXCEPTION_BITS 0x0003f000 #define MIPS_FPU_EXCEPTION_INEXACT 0x00001000 #define MIPS_FPU_EXCEPTION_UNDERFLOW 0x00002000 #define MIPS_FPU_EXCEPTION_OVERFLOW 0x00004000 #define MIPS_FPU_EXCEPTION_DIV0 0x00008000 #define MIPS_FPU_EXCEPTION_INVALID 0x00010000 #define MIPS_FPU_EXCEPTION_UNIMPL 0x00020000 #define MIPS_FPU_COND_BIT 0x00800000 #define MIPS_FPU_FLUSH_BIT 0x01000000 /* r4k, MBZ on r3k */ #define MIPS_FPC_MBZ_BITS 0xfe7c0000 /* * Constants to determine if have a floating point instruction. */ #define MIPS_OPCODE_SHIFT 26 #define MIPS_OPCODE_C1 0x11 /* Coherence manager constants */ #define MIPS_CMGCRB_BASE 11 #define MIPS_CMGCRF_BASE (~((1 << MIPS_CMGCRB_BASE) - 1)) /* * Bits defined for for the HWREna (CP0 register 7, select 0). */ #define MIPS_HWRENA_CPUNUM (1<<0) /* CPU number program is running on */ #define MIPS_HWRENA_SYNCI_STEP (1<<1) /* Address step sized used with SYNCI */ #define MIPS_HWRENA_CC (1<<2) /* Hi Res cycle counter */ #define MIPS_HWRENA_CCRES (1<<3) /* Cycle counter resolution */ #define MIPS_HWRENA_UL (1<<29) /* UserLocal Register */ #define MIPS_HWRENA_IMPL30 (1<<30) /* Implementation-dependent 30 */ #define MIPS_HWRENA_IMPL31 (1<<31) /* Implementation-dependent 31 */ #endif /* _MIPS_CPUREGS_H_ */