# # Specific board setup for the Buffalo Airstation WZR-HPAG300H # # The WZR-HPAG300H has the following hardware: # # + AR7161 CPU SoC # + 2x AR9280 5GHz 11n # + AR8136 Gigabit switch # + 2 m25ll128(really w25q128) based 16MB flash # + 128MB RAM # + uboot environment #NO_UNIVERSE include "AR71XX_BASE" ident "WZR-HPAG300H" hints "WZR-HPAG300H.hints" options AR71XX_REALMEM=128*1024*1024 options AR71XX_ENV_UBOOT options BOOTVERBOSE # GEOM modules device xz options GEOM_UZIP device geom_map # to get access to the SPI flash partitions options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uzip\" options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash options ATH_EEPROM_FIRMWARE # Use EEPROM from flash device firmware # Used by the above # Options required for miiproxy and mdiobus options ARGE_MDIO # Export an MDIO bus separate from arge device miiproxy # MDIO bus <-> MII PHY rendezvous device etherswitch device arswitch # hwpmc device hwpmc_mips24k device hwpmc # load these via modules, shrink kernel nodevice if_bridge nodevice bridgestp options RANDOM_LOADABLE