#
# TP-Link WR740N v4
#
# * AR9330 SoC
# * 32MB RAM
# * 4MB flash
# * Integrated 1x1 2GHz wifi and 10/100 bridge
#
#

#NO_UNIVERSE

# Include the default AR933x parameters
include         "std.AR933X"

ident           TL-WR740Nv4

# Override hints with board values
hints           "TL-WR740Nv4.hints"

# Board memory - 32MB
options         AR71XX_REALMEM=(32*1024*1024)

# i2c GPIO bus
#device		gpioiic
#device		iicbb
#device		iicbus
#device		iic

# Options required for miiproxy and mdiobus
options 	ARGE_MDIO	# Export an MDIO bus separate from arge
device		miiproxy	# MDIO bus <-> MII PHY rendezvous

device		etherswitch
device		arswitch

# read MSDOS formatted disks - USB
#options 	MSDOSFS

# Enable the uboot environment stuff rather then the
# redboot stuff.
options 	AR71XX_ENV_UBOOT

# uzip - to boot natively from flash
device		xz
options 	GEOM_UZIP

# Used for the static uboot partition map
device          geom_map

# Boot off of the rootfs, as defined in the geom_map setup.
# options 	ROOTDEVNAME=\"ufs:map/rootfs.uzip\"
# Note: we don't fit in 4MB flash, so the rootfs must be on USB for now
options		ROOTDEVNAME=\"ufs:da0\"