#
# TPLink TL-WDR4300 - AR9344 based dual-band 2x2 wifi
#
#

#NO_UNIVERSE

# Include the default AR934x parameters
include         "std.AR934X"

ident           TL-WDR4300

# Override hints with board values
hints           "TL-WDR4300.hints"

# Force the board memory - the base DB120 has 128MB RAM
options         AR71XX_REALMEM=(128*1024*1024)

# i2c GPIO bus
#device		gpioiic
#device		iicbb
#device		iicbus
#device		iic

# Options required for miiproxy and mdiobus
options 	ARGE_DEBUG
options 	ARGE_MDIO	# Export an MDIO bus separate from arge
device		miiproxy	# MDIO bus <-> MII PHY rendezvous

device		etherswitch
device		arswitch

# read MSDOS formatted disks - USB
options 	MSDOSFS

# Enable the uboot environment stuff rather then the
# redboot stuff.
options 	AR71XX_ENV_UBOOT

# uzip - to boot natively from flash
device		xz
options 	GEOM_UZIP

# Used for the static uboot partition map
device          geom_map

# Yes, this board has a PCI connected atheros device
options 	AR71XX_ATH_EEPROM
device		firmware		# Used by the above
options 	ATH_EEPROM_FIRMWARE

options 	ATH_DEBUG_ALQ

# Boot off of the rootfs, as defined in the geom_map setup.
options 	ROOTDEVNAME=\"ufs:map/rootfs.uzip\"

# This is required for the 2GHz LNAs on the AR9340 SoC.
# Without this the 2GHz radio is Quite Deaf.
device		gpio
device		gpioled