#
#
hint.apb.0.at="nexus0"
hint.apb.0.irq=4

# uart0
hint.uart.0.at="apb0"
# see atheros/uart_cpu_ar71xx.c why +3
hint.uart.0.maddr=0x18020003
hint.uart.0.msize=0x18
hint.uart.0.irq=3

#ohci
hint.ohci.0.at="apb0"
hint.ohci.0.maddr=0x1c000000
hint.ohci.0.msize=0x01000000
hint.ohci.0.irq=6

#ehci
hint.ehci.0.at="nexus0"
hint.ehci.0.maddr=0x1b000000
hint.ehci.0.msize=0x01000000
hint.ehci.0.irq=1

# pci
hint.pcib.0.at="nexus0"
hint.pcib.0.irq=0

hint.arge.0.at="nexus0"
hint.arge.0.maddr=0x19000000
hint.arge.0.msize=0x1000
hint.arge.0.irq=2

# phymask, media and fduplex depend upon the specific
# board.
# So each board will override the settings as needed.

hint.arge.1.at="nexus0"
hint.arge.1.maddr=0x1a000000
hint.arge.1.msize=0x1000
hint.arge.1.irq=3

# SPI flash
hint.spi.0.at="nexus0"
hint.spi.0.maddr=0x1f000000
hint.spi.0.msize=0x10

hint.mx25l.0.at="spibus0"
hint.mx25l.0.cs=0

# Watchdog
hint.ar71xx_wdog.0.at="nexus0"

# GPIO
hint.gpio.0.at="apb0"
hint.gpio.0.maddr=0x18040000
hint.gpio.0.msize=0x1000
hint.gpio.0.irq=2

# Each board should override the GPIO bus pins with the configuration
# relevant to it. Thus no pins are defined here.

# hwpmc device
hint.ar71xx_pmc.0.at="apb0"
hint.ar71xx_pmc.0.irq=5