#
# Specific board setup for the Atheros AP91 reference board.
#
# The AP93 has the following hardware:
#
# + AR7240 CPU SoC
# + AR9280 Wifi
# + Integrated switch (XXX speed?)
# + 16MB flash
# + 64MB RAM
# + uboot environment

#NO_UNIVERSE

include		"std.AR724X"
ident		"AP93"
hints		"AP93.hints"

options 	AR71XX_REALMEM=64*1024*1024

options 	AR71XX_ENV_UBOOT

# For DOS - enable if required
options 	MSDOSFS

# uncompress - to boot read-only lzma natively from flash
device		xz
options 	GEOM_UZIP
options 	ROOTDEVNAME=\"ufs:/dev/map/rootfs.uzip\"

# Used for the static uboot partition map
device          geom_map

# Options needed for the EEPROM based calibration/PCI configuration data.
options 	AR71XX_ATH_EEPROM	# Fetch EEPROM/PCI config from flash
options 	ATH_EEPROM_FIRMWARE	# Use EEPROM from flash
device		firmware		# Used by the above

# Options required for miiproxy and mdiobus
options 	ARGE_MDIO		# Export an MDIO bus separate from arge
device		miiproxy		# MDIO bus <-> MII PHY rendezvous

device		etherswitch
device		arswitch