/*- * Copyright (c) 2017 Ian Lepore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Support routines usable by any SoC sdhci bridge driver that uses gpio pins * for card detect and write protect, and uses FDT data to describe those pins. */ #include #include #include #include #include #include #include #include #include #include #include #include #include struct sdhci_fdt_gpio { device_t dev; struct sdhci_slot * slot; gpio_pin_t wp_pin; gpio_pin_t cd_pin; void * cd_ihandler; struct resource * cd_ires; int cd_irid; bool wp_disabled; bool wp_inverted; bool cd_disabled; bool cd_inverted; }; /* * Card detect interrupt handler. */ static void cd_intr(void *arg) { struct sdhci_fdt_gpio *gpio = arg; sdhci_handle_card_present(gpio->slot, sdhci_fdt_gpio_get_present(gpio)); } /* * Card detect setup. */ static void cd_setup(struct sdhci_fdt_gpio *gpio, phandle_t node) { int pincaps; device_t dev; const char *cd_mode_str; dev = gpio->dev; /* * If the device is flagged as non-removable, set that slot option, and * set a flag to make sdhci_fdt_gpio_get_present() always return true. */ if (OF_hasprop(node, "non-removable")) { gpio->slot->opt |= SDHCI_NON_REMOVABLE; gpio->cd_disabled = true; if (bootverbose) device_printf(dev, "Non-removable media\n"); return; } /* * If there is no cd-gpios property, then presumably the hardware * PRESENT_STATE register and interrupts will reflect card state * properly, and there's nothing more for us to do. Our get_present() * will return sdhci_generic_get_card_present() because cd_pin is NULL. * * If there is a property, make sure we can read the pin. */ if (gpio_pin_get_by_ofw_property(dev, node, "cd-gpios", &gpio->cd_pin)) return; if (gpio_pin_getcaps(gpio->cd_pin, &pincaps) != 0 || !(pincaps & GPIO_PIN_INPUT)) { device_printf(dev, "Cannot read card-detect gpio pin; " "setting card-always-present flag.\n"); gpio->cd_disabled = true; return; } if (OF_hasprop(node, "cd-inverted")) gpio->cd_inverted = true; /* * If the pin can trigger an interrupt on both rising and falling edges, * we can use it to detect card presence changes. If not, we'll request * card presence polling instead of using interrupts. */ if (!(pincaps & GPIO_INTR_EDGE_BOTH)) { if (bootverbose) device_printf(dev, "Cannot configure " "GPIO_INTR_EDGE_BOTH for card detect\n"); goto without_interrupts; } /* * Create an interrupt resource from the pin and set up the interrupt. */ if ((gpio->cd_ires = gpio_alloc_intr_resource(dev, &gpio->cd_irid, RF_ACTIVE, gpio->cd_pin, GPIO_INTR_EDGE_BOTH)) == NULL) { if (bootverbose) device_printf(dev, "Cannot allocate an IRQ for card " "detect GPIO\n"); goto without_interrupts; } if (bus_setup_intr(dev, gpio->cd_ires, INTR_TYPE_BIO | INTR_MPSAFE, NULL, cd_intr, gpio, &gpio->cd_ihandler) != 0) { device_printf(dev, "Unable to setup card-detect irq handler\n"); gpio->cd_ihandler = NULL; goto without_interrupts; } without_interrupts: /* * If we have a readable gpio pin, but didn't successfully configure * gpio interrupts, ask the sdhci driver to poll from a callout. */ if (gpio->cd_ihandler == NULL) { cd_mode_str = "polling"; gpio->slot->quirks |= SDHCI_QUIRK_POLL_CARD_PRESENT; } else { cd_mode_str = "interrupts"; } if (bootverbose) { device_printf(dev, "Card presence detect on %s pin %u, " "configured for %s.\n", device_get_nameunit(gpio->cd_pin->dev), gpio->cd_pin->pin, cd_mode_str); } } /* * Write protect setup. */ static void wp_setup(struct sdhci_fdt_gpio *gpio, phandle_t node) { device_t dev; dev = gpio->dev; if (OF_hasprop(node, "wp-disable")) { gpio->wp_disabled = true; if (bootverbose) device_printf(dev, "Write protect disabled\n"); return; } if (gpio_pin_get_by_ofw_property(dev, node, "wp-gpios", &gpio->wp_pin)) return; if (OF_hasprop(node, "wp-inverted")) gpio->wp_inverted = true; if (bootverbose) device_printf(dev, "Write protect switch on %s pin %u\n", device_get_nameunit(gpio->wp_pin->dev), gpio->wp_pin->pin); } struct sdhci_fdt_gpio * sdhci_fdt_gpio_setup(device_t dev, struct sdhci_slot *slot) { phandle_t node; struct sdhci_fdt_gpio *gpio; gpio = malloc(sizeof(*gpio), M_DEVBUF, M_ZERO | M_WAITOK); gpio->dev = dev; gpio->slot = slot; node = ofw_bus_get_node(dev); wp_setup(gpio, node); cd_setup(gpio, node); return (gpio); } void sdhci_fdt_gpio_teardown(struct sdhci_fdt_gpio *gpio) { if (gpio == NULL) return; if (gpio->cd_ihandler != NULL) bus_teardown_intr(gpio->dev, gpio->cd_ires, gpio->cd_ihandler); if (gpio->wp_pin != NULL) gpio_pin_release(gpio->wp_pin); if (gpio->cd_pin != NULL) gpio_pin_release(gpio->cd_pin); if (gpio->cd_ires != NULL) bus_release_resource(gpio->dev, SYS_RES_IRQ, 0, gpio->cd_ires); free(gpio, M_DEVBUF); } bool sdhci_fdt_gpio_get_present(struct sdhci_fdt_gpio *gpio) { bool pinstate; if (gpio->cd_disabled) return (true); if (gpio->cd_pin == NULL) return (sdhci_generic_get_card_present(gpio->slot->bus, gpio->slot)); gpio_pin_is_active(gpio->cd_pin, &pinstate); return (pinstate ^ gpio->cd_inverted); } int sdhci_fdt_gpio_get_readonly(struct sdhci_fdt_gpio *gpio) { bool pinstate; if (gpio->wp_disabled) return (false); if (gpio->wp_pin == NULL) return (sdhci_generic_get_ro(gpio->slot->bus, gpio->slot->dev)); gpio_pin_is_active(gpio->wp_pin, &pinstate); return (pinstate ^ gpio->wp_inverted); }