/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2008 Alexander Motin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef __SDHCI_H__ #define __SDHCI_H__ #include "opt_mmccam.h" /* Macro for sizing the SDMA bounce buffer on the SDMA buffer boundary. */ #define SDHCI_SDMA_BNDRY_TO_BBUFSZ(bndry) (4096 * (1 << bndry)) /* Controller doesn't honor resets unless we touch the clock register */ #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1 << 0) /* Controller really supports DMA */ #define SDHCI_QUIRK_FORCE_DMA (1 << 1) /* Controller has unusable DMA engine */ #define SDHCI_QUIRK_BROKEN_DMA (1 << 2) /* Controller doesn't like to be reset when there is no card inserted. */ #define SDHCI_QUIRK_NO_CARD_NO_RESET (1 << 3) /* Controller has flaky internal state so reset it on each ios change */ #define SDHCI_QUIRK_RESET_ON_IOS (1 << 4) /* Controller can only DMA chunk sizes that are a multiple of 32 bits */ #define SDHCI_QUIRK_32BIT_DMA_SIZE (1 << 5) /* Controller needs to be reset after each request to stay stable */ #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1 << 6) /* Controller has an off-by-one issue with timeout value */ #define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1 << 7) /* Controller has broken read timings */ #define SDHCI_QUIRK_BROKEN_TIMINGS (1 << 8) /* Controller needs lowered frequency */ #define SDHCI_QUIRK_LOWER_FREQUENCY (1 << 9) /* Data timeout is invalid, should use SD clock */ #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1 << 10) /* Timeout value is invalid, should be overridden */ #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1 << 11) /* SDHCI_CAPABILITIES is invalid */ #define SDHCI_QUIRK_MISSING_CAPS (1 << 12) /* Hardware shifts the 136-bit response, don't do it in software. */ #define SDHCI_QUIRK_DONT_SHIFT_RESPONSE (1 << 13) /* Wait to see reset bit asserted before waiting for de-asserted */ #define SDHCI_QUIRK_WAITFOR_RESET_ASSERTED (1 << 14) /* Leave controller in standard mode when putting card in HS mode. */ #define SDHCI_QUIRK_DONT_SET_HISPD_BIT (1 << 15) /* Alternate clock source is required when supplying a 400 KHz clock. */ #define SDHCI_QUIRK_BCM577XX_400KHZ_CLKSRC (1 << 16) /* Card insert/remove interrupts don't work, polling required. */ #define SDHCI_QUIRK_POLL_CARD_PRESENT (1 << 17) /* All controller slots are non-removable. */ #define SDHCI_QUIRK_ALL_SLOTS_NON_REMOVABLE (1 << 18) /* Issue custom Intel controller reset sequence after power-up. */ #define SDHCI_QUIRK_INTEL_POWER_UP_RESET (1 << 19) /* Data timeout is invalid, use 1 MHz clock instead. */ #define SDHCI_QUIRK_DATA_TIMEOUT_1MHZ (1 << 20) /* Controller doesn't allow access boot partitions. */ #define SDHCI_QUIRK_BOOT_NOACC (1 << 21) /* Controller waits for busy responses. */ #define SDHCI_QUIRK_WAIT_WHILE_BUSY (1 << 22) /* Controller supports eMMC DDR52 mode. */ #define SDHCI_QUIRK_MMC_DDR52 (1 << 23) /* Controller support for UHS DDR50 mode is broken. */ #define SDHCI_QUIRK_BROKEN_UHS_DDR50 (1 << 24) /* Controller support for eMMC HS200 mode is broken. */ #define SDHCI_QUIRK_BROKEN_MMC_HS200 (1 << 25) /* Controller reports support for eMMC HS400 mode as SDHCI_CAN_MMC_HS400. */ #define SDHCI_QUIRK_CAPS_BIT63_FOR_MMC_HS400 (1 << 26) /* Controller support for SDHCI_CTRL2_PRESET_VALUE is broken. */ #define SDHCI_QUIRK_PRESET_VALUE_BROKEN (1 << 27) /* Controller does not support or the support for ACMD12 is broken. */ #define SDHCI_QUIRK_BROKEN_AUTO_STOP (1 << 28) /* Controller supports eMMC HS400 mode if SDHCI_CAN_SDR104 is set. */ #define SDHCI_QUIRK_MMC_HS400_IF_CAN_SDR104 (1 << 29) /* SDMA boundary in SDHCI_BLOCK_SIZE broken - use front-end supplied value. */ #define SDHCI_QUIRK_BROKEN_SDMA_BOUNDARY (1 << 30) /* * Controller registers */ #define SDHCI_DMA_ADDRESS 0x00 #define SDHCI_BLOCK_SIZE 0x04 #define SDHCI_BLKSZ_SDMA_BNDRY_4K 0x00 #define SDHCI_BLKSZ_SDMA_BNDRY_8K 0x01 #define SDHCI_BLKSZ_SDMA_BNDRY_16K 0x02 #define SDHCI_BLKSZ_SDMA_BNDRY_32K 0x03 #define SDHCI_BLKSZ_SDMA_BNDRY_64K 0x04 #define SDHCI_BLKSZ_SDMA_BNDRY_128K 0x05 #define SDHCI_BLKSZ_SDMA_BNDRY_256K 0x06 #define SDHCI_BLKSZ_SDMA_BNDRY_512K 0x07 #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) #define SDHCI_BLOCK_COUNT 0x06 #define SDHCI_ARGUMENT 0x08 #define SDHCI_TRANSFER_MODE 0x0C #define SDHCI_TRNS_DMA 0x01 #define SDHCI_TRNS_BLK_CNT_EN 0x02 #define SDHCI_TRNS_ACMD12 0x04 #define SDHCI_TRNS_READ 0x10 #define SDHCI_TRNS_MULTI 0x20 #define SDHCI_COMMAND_FLAGS 0x0E #define SDHCI_CMD_RESP_NONE 0x00 #define SDHCI_CMD_RESP_LONG 0x01 #define SDHCI_CMD_RESP_SHORT 0x02 #define SDHCI_CMD_RESP_SHORT_BUSY 0x03 #define SDHCI_CMD_RESP_MASK 0x03 #define SDHCI_CMD_CRC 0x08 #define SDHCI_CMD_INDEX 0x10 #define SDHCI_CMD_DATA 0x20 #define SDHCI_CMD_TYPE_NORMAL 0x00 #define SDHCI_CMD_TYPE_SUSPEND 0x40 #define SDHCI_CMD_TYPE_RESUME 0x80 #define SDHCI_CMD_TYPE_ABORT 0xc0 #define SDHCI_CMD_TYPE_MASK 0xc0 #define SDHCI_COMMAND 0x0F #define SDHCI_RESPONSE 0x10 #define SDHCI_BUFFER 0x20 #define SDHCI_PRESENT_STATE 0x24 #define SDHCI_CMD_INHIBIT 0x00000001 #define SDHCI_DAT_INHIBIT 0x00000002 #define SDHCI_DAT_ACTIVE 0x00000004 #define SDHCI_RETUNE_REQUEST 0x00000008 #define SDHCI_DOING_WRITE 0x00000100 #define SDHCI_DOING_READ 0x00000200 #define SDHCI_SPACE_AVAILABLE 0x00000400 #define SDHCI_DATA_AVAILABLE 0x00000800 #define SDHCI_CARD_PRESENT 0x00010000 #define SDHCI_CARD_STABLE 0x00020000 #define SDHCI_CARD_PIN 0x00040000 #define SDHCI_WRITE_PROTECT 0x00080000 #define SDHCI_STATE_DAT_MASK 0x00f00000 #define SDHCI_STATE_CMD 0x01000000 #define SDHCI_HOST_CONTROL 0x28 #define SDHCI_CTRL_LED 0x01 #define SDHCI_CTRL_4BITBUS 0x02 #define SDHCI_CTRL_HISPD 0x04 #define SDHCI_CTRL_SDMA 0x08 #define SDHCI_CTRL_ADMA2 0x10 #define SDHCI_CTRL_ADMA264 0x18 #define SDHCI_CTRL_DMA_MASK 0x18 #define SDHCI_CTRL_8BITBUS 0x20 #define SDHCI_CTRL_CARD_DET 0x40 #define SDHCI_CTRL_FORCE_CARD 0x80 #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 #define SDHCI_POWER_180 0x0A #define SDHCI_POWER_300 0x0C #define SDHCI_POWER_330 0x0E #define SDHCI_BLOCK_GAP_CONTROL 0x2A #define SDHCI_WAKE_UP_CONTROL 0x2B #define SDHCI_CLOCK_CONTROL 0x2C #define SDHCI_DIVIDER_MASK 0xff #define SDHCI_DIVIDER_MASK_LEN 8 #define SDHCI_DIVIDER_SHIFT 8 #define SDHCI_DIVIDER_HI_MASK 3 #define SDHCI_DIVIDER_HI_SHIFT 6 #define SDHCI_CLOCK_CARD_EN 0x0004 #define SDHCI_CLOCK_INT_STABLE 0x0002 #define SDHCI_CLOCK_INT_EN 0x0001 #define SDHCI_DIVIDERS_MASK \ ((SDHCI_DIVIDER_MASK << SDHCI_DIVIDER_SHIFT) | \ (SDHCI_DIVIDER_HI_MASK << SDHCI_DIVIDER_HI_SHIFT)) #define SDHCI_TIMEOUT_CONTROL 0x2E #define SDHCI_SOFTWARE_RESET 0x2F #define SDHCI_RESET_ALL 0x01 #define SDHCI_RESET_CMD 0x02 #define SDHCI_RESET_DATA 0x04 #define SDHCI_INT_STATUS 0x30 #define SDHCI_INT_ENABLE 0x34 #define SDHCI_SIGNAL_ENABLE 0x38 #define SDHCI_INT_RESPONSE 0x00000001 #define SDHCI_INT_DATA_END 0x00000002 #define SDHCI_INT_BLOCK_GAP 0x00000004 #define SDHCI_INT_DMA_END 0x00000008 #define SDHCI_INT_SPACE_AVAIL 0x00000010 #define SDHCI_INT_DATA_AVAIL 0x00000020 #define SDHCI_INT_CARD_INSERT 0x00000040 #define SDHCI_INT_CARD_REMOVE 0x00000080 #define SDHCI_INT_CARD_INT 0x00000100 #define SDHCI_INT_INT_A 0x00000200 #define SDHCI_INT_INT_B 0x00000400 #define SDHCI_INT_INT_C 0x00000800 #define SDHCI_INT_RETUNE 0x00001000 #define SDHCI_INT_ERROR 0x00008000 #define SDHCI_INT_TIMEOUT 0x00010000 #define SDHCI_INT_CRC 0x00020000 #define SDHCI_INT_END_BIT 0x00040000 #define SDHCI_INT_INDEX 0x00080000 #define SDHCI_INT_DATA_TIMEOUT 0x00100000 #define SDHCI_INT_DATA_CRC 0x00200000 #define SDHCI_INT_DATA_END_BIT 0x00400000 #define SDHCI_INT_BUS_POWER 0x00800000 #define SDHCI_INT_ACMD12ERR 0x01000000 #define SDHCI_INT_ADMAERR 0x02000000 #define SDHCI_INT_TUNEERR 0x04000000 #define SDHCI_INT_NORMAL_MASK 0x00007FFF #define SDHCI_INT_ERROR_MASK 0xFFFF8000 #define SDHCI_INT_CMD_ERROR_MASK (SDHCI_INT_TIMEOUT | \ SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX) #define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_CMD_ERROR_MASK) #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ SDHCI_INT_DATA_END_BIT) #define SDHCI_ACMD12_ERR 0x3C #define SDHCI_HOST_CONTROL2 0x3E #define SDHCI_CTRL2_PRESET_VALUE 0x8000 #define SDHCI_CTRL2_ASYNC_INTR 0x4000 #define SDHCI_CTRL2_64BIT_ENABLE 0x2000 #define SDHCI_CTRL2_HOST_V4_ENABLE 0x1000 #define SDHCI_CTRL2_CMD23_ENABLE 0x0800 #define SDHCI_CTRL2_ADMA2_LENGTH_MODE 0x0400 #define SDHCI_CTRL2_UHS2_IFACE_ENABLE 0x0100 #define SDHCI_CTRL2_SAMPLING_CLOCK 0x0080 #define SDHCI_CTRL2_EXEC_TUNING 0x0040 #define SDHCI_CTRL2_DRIVER_TYPE_MASK 0x0030 #define SDHCI_CTRL2_DRIVER_TYPE_B 0x0000 #define SDHCI_CTRL2_DRIVER_TYPE_A 0x0010 #define SDHCI_CTRL2_DRIVER_TYPE_C 0x0020 #define SDHCI_CTRL2_DRIVER_TYPE_D 0x0030 #define SDHCI_CTRL2_S18_ENABLE 0x0008 #define SDHCI_CTRL2_UHS_MASK 0x0007 #define SDHCI_CTRL2_UHS_SDR12 0x0000 #define SDHCI_CTRL2_UHS_SDR25 0x0001 #define SDHCI_CTRL2_UHS_SDR50 0x0002 #define SDHCI_CTRL2_UHS_SDR104 0x0003 #define SDHCI_CTRL2_UHS_DDR50 0x0004 #define SDHCI_CTRL2_MMC_HS400 0x0005 /* non-standard */ #define SDHCI_CAPABILITIES 0x40 #define SDHCI_TIMEOUT_CLK_MASK 0x0000003F #define SDHCI_TIMEOUT_CLK_SHIFT 0 #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 #define SDHCI_CLOCK_BASE_MASK 0x00003F00 #define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00 #define SDHCI_CLOCK_BASE_SHIFT 8 #define SDHCI_MAX_BLOCK_MASK 0x00030000 #define SDHCI_MAX_BLOCK_SHIFT 16 #define SDHCI_CAN_DO_8BITBUS 0x00040000 #define SDHCI_CAN_DO_ADMA2 0x00080000 #define SDHCI_CAN_DO_HISPD 0x00200000 #define SDHCI_CAN_DO_DMA 0x00400000 #define SDHCI_CAN_DO_SUSPEND 0x00800000 #define SDHCI_CAN_VDD_330 0x01000000 #define SDHCI_CAN_VDD_300 0x02000000 #define SDHCI_CAN_VDD_180 0x04000000 #define SDHCI_CAN_DO_64BIT 0x10000000 #define SDHCI_CAN_ASYNC_INTR 0x20000000 #define SDHCI_SLOTTYPE_MASK 0xC0000000 #define SDHCI_SLOTTYPE_REMOVABLE 0x00000000 #define SDHCI_SLOTTYPE_EMBEDDED 0x40000000 #define SDHCI_SLOTTYPE_SHARED 0x80000000 #define SDHCI_CAPABILITIES2 0x44 #define SDHCI_CAN_SDR50 0x00000001 #define SDHCI_CAN_SDR104 0x00000002 #define SDHCI_CAN_DDR50 0x00000004 #define SDHCI_CAN_DRIVE_TYPE_A 0x00000010 #define SDHCI_CAN_DRIVE_TYPE_C 0x00000020 #define SDHCI_CAN_DRIVE_TYPE_D 0x00000040 #define SDHCI_RETUNE_CNT_MASK 0x00000F00 #define SDHCI_RETUNE_CNT_SHIFT 8 #define SDHCI_TUNE_SDR50 0x00002000 #define SDHCI_RETUNE_MODES_MASK 0x0000C000 #define SDHCI_RETUNE_MODES_SHIFT 14 #define SDHCI_CLOCK_MULT_MASK 0x00FF0000 #define SDHCI_CLOCK_MULT_SHIFT 16 #define SDHCI_CAN_MMC_HS400 0x80000000 /* non-standard */ #define SDHCI_MAX_CURRENT 0x48 #define SDHCI_FORCE_AUTO_EVENT 0x50 #define SDHCI_FORCE_INTR_EVENT 0x52 #define SDHCI_ADMA_ERR 0x54 #define SDHCI_ADMA_ERR_LENGTH 0x04 #define SDHCI_ADMA_ERR_STATE_MASK 0x03 #define SDHCI_ADMA_ERR_STATE_STOP 0x00 #define SDHCI_ADMA_ERR_STATE_FDS 0x01 #define SDHCI_ADMA_ERR_STATE_TFR 0x03 #define SDHCI_ADMA_ADDRESS_LO 0x58 #define SDHCI_ADMA_ADDRESS_HI 0x5C #define SDHCI_PRESET_VALUE 0x60 #define SDHCI_SHARED_BUS_CTRL 0xE0 #define SDHCI_SLOT_INT_STATUS 0xFC #define SDHCI_HOST_VERSION 0xFE #define SDHCI_VENDOR_VER_MASK 0xFF00 #define SDHCI_VENDOR_VER_SHIFT 8 #define SDHCI_SPEC_VER_MASK 0x00FF #define SDHCI_SPEC_VER_SHIFT 0 #define SDHCI_SPEC_100 0 #define SDHCI_SPEC_200 1 #define SDHCI_SPEC_300 2 #define SDHCI_SPEC_400 3 #define SDHCI_SPEC_410 4 #define SDHCI_SPEC_420 5 SYSCTL_DECL(_hw_sdhci); extern u_int sdhci_quirk_clear; extern u_int sdhci_quirk_set; struct sdhci_slot { struct mtx mtx; /* Slot mutex */ u_int quirks; /* Chip specific quirks */ u_int caps; /* Override SDHCI_CAPABILITIES */ u_int caps2; /* Override SDHCI_CAPABILITIES2 */ device_t bus; /* Bus device */ device_t dev; /* Slot device */ u_char num; /* Slot number */ u_char opt; /* Slot options */ #define SDHCI_HAVE_DMA 0x01 #define SDHCI_PLATFORM_TRANSFER 0x02 #define SDHCI_NON_REMOVABLE 0x04 #define SDHCI_TUNING_SUPPORTED 0x08 #define SDHCI_TUNING_ENABLED 0x10 #define SDHCI_SDR50_NEEDS_TUNING 0x20 #define SDHCI_SLOT_EMBEDDED 0x40 u_char version; int timeout; /* Transfer timeout */ uint32_t max_clk; /* Max possible freq */ uint32_t timeout_clk; /* Timeout freq */ bus_dma_tag_t dmatag; bus_dmamap_t dmamap; u_char *dmamem; bus_addr_t paddr; /* DMA buffer address */ uint32_t sdma_bbufsz; /* SDMA bounce buffer size */ uint8_t sdma_boundary; /* SDMA boundary */ struct task card_task; /* Card presence check task */ struct timeout_task card_delayed_task;/* Card insert delayed task */ struct callout card_poll_callout;/* Card present polling callout */ struct callout timeout_callout;/* Card command/data response timeout */ struct callout retune_callout; /* Re-tuning mode 1 callout */ struct mmc_host host; /* Host parameters */ struct mmc_request *req; /* Current request */ struct mmc_command *curcmd; /* Current command of current request */ struct mmc_request *tune_req; /* Tuning request */ struct mmc_command *tune_cmd; /* Tuning command of tuning request */ struct mmc_data *tune_data; /* Tuning data of tuning command */ uint32_t retune_ticks; /* Re-tuning callout ticks [hz] */ uint32_t intmask; /* Current interrupt mask */ uint32_t clock; /* Current clock freq. */ size_t offset; /* Data buffer offset */ uint8_t hostctrl; /* Current host control register */ uint8_t retune_count; /* Controller re-tuning count [s] */ uint8_t retune_mode; /* Controller re-tuning mode */ #define SDHCI_RETUNE_MODE_1 0x00 #define SDHCI_RETUNE_MODE_2 0x01 #define SDHCI_RETUNE_MODE_3 0x02 uint8_t retune_req; /* Re-tuning request status */ #define SDHCI_RETUNE_REQ_NEEDED 0x01 /* Re-tuning w/o circuit reset needed */ #define SDHCI_RETUNE_REQ_RESET 0x02 /* Re-tuning w/ circuit reset needed */ u_char power; /* Current power */ u_char bus_busy; /* Bus busy status */ u_char cmd_done; /* CMD command part done flag */ u_char data_done; /* DAT command part done flag */ u_char flags; /* Request execution flags */ #define CMD_STARTED 1 #define STOP_STARTED 2 #define SDHCI_USE_DMA 4 /* Use DMA for this req. */ #define PLATFORM_DATA_STARTED 8 /* Data xfer is handled by platform */ #ifdef MMCCAM /* CAM stuff */ union ccb *ccb; struct cam_devq *devq; struct cam_sim *sim; struct mtx sim_mtx; u_char card_present; /* XXX Maybe derive this from elsewhere? */ #endif }; int sdhci_generic_read_ivar(device_t bus, device_t child, int which, uintptr_t *result); int sdhci_generic_write_ivar(device_t bus, device_t child, int which, uintptr_t value); int sdhci_init_slot(device_t dev, struct sdhci_slot *slot, int num); void sdhci_start_slot(struct sdhci_slot *slot); /* performs generic clean-up for platform transfers */ void sdhci_finish_data(struct sdhci_slot *slot); int sdhci_cleanup_slot(struct sdhci_slot *slot); int sdhci_generic_suspend(struct sdhci_slot *slot); int sdhci_generic_resume(struct sdhci_slot *slot); int sdhci_generic_update_ios(device_t brdev, device_t reqdev); int sdhci_generic_tune(device_t brdev, device_t reqdev, bool hs400); int sdhci_generic_switch_vccq(device_t brdev, device_t reqdev); int sdhci_generic_retune(device_t brdev, device_t reqdev, bool reset); int sdhci_generic_request(device_t brdev, device_t reqdev, struct mmc_request *req); int sdhci_generic_get_ro(device_t brdev, device_t reqdev); int sdhci_generic_acquire_host(device_t brdev, device_t reqdev); int sdhci_generic_release_host(device_t brdev, device_t reqdev); void sdhci_generic_intr(struct sdhci_slot *slot); uint32_t sdhci_generic_min_freq(device_t brdev, struct sdhci_slot *slot); bool sdhci_generic_get_card_present(device_t brdev, struct sdhci_slot *slot); void sdhci_generic_set_uhs_timing(device_t brdev, struct sdhci_slot *slot); void sdhci_handle_card_present(struct sdhci_slot *slot, bool is_present); #define SDHCI_VERSION 2 #define SDHCI_DEPEND(name) \ MODULE_DEPEND(name, sdhci, SDHCI_VERSION, SDHCI_VERSION, SDHCI_VERSION); #endif /* __SDHCI_H__ */