/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2000 Michael Smith * Copyright (c) 2000 BSDi * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Lookup table for code-to-text translations. */ struct mly_code_lookup { char *string; u_int32_t code; }; static char *mly_describe_code(struct mly_code_lookup *table, u_int32_t code); /******************************************************************************** * Look up a text description of a numeric code and return a pointer to same. */ static char * mly_describe_code(struct mly_code_lookup *table, u_int32_t code) { int i; for (i = 0; table[i].string != NULL; i++) if (table[i].code == code) return(table[i].string); return(table[i+1].string); } #if 0 static struct mly_code_lookup mly_table_bustype[] = { {"SCSI", 0x00}, {"FC-AL", 0x01}, {"PCI", 0x03}, {NULL, 0}, {"unknown bus", 0} }; #endif static struct mly_code_lookup mly_table_controllertype[] = { #if 0 /* not supported by this driver */ {"DAC960E", 0x01}, /* EISA */ {"DAC960M", 0x08}, /* MCA */ {"DAC960PD", 0x10}, /* PCI Dual */ {"DAC960PL", 0x11}, /* PCU low-cost */ {"DAC960PDU", 0x12}, /* PD Ultra */ {"DAC960PE", 0x13}, /* Peregrine low-cost */ {"DAC960PG", 0x14}, /* Peregrine high-performance */ {"DAC960PJ", 0x15}, /* Road Runner */ {"DAC960PTL0", 0x16}, /* Jaguar */ {"DAC960PR", 0x17}, /* Road Runner (again?) */ {"DAC960PRL", 0x18}, /* Tomcat */ {"DAC960PT", 0x19}, /* Road Runner (yet again?) */ {"DAC1164P", 0x1a}, /* Little Apple */ {"DAC960PTL1", 0x1b}, /* Jaguar+ */ #endif {"EXR2000P", 0x1c}, /* Big Apple */ {"EXR3000P", 0x1d}, /* Fibre Apple */ {"AcceleRAID 352", 0x1e}, /* Leopard */ {"AcceleRAID 170", 0x1f}, /* Lynx */ {"AcceleRAID 160", 0x20}, /* Bobcat */ {NULL, 0}, {"unknown adapter", 0} }; static struct mly_code_lookup mly_table_oemname[] = { {"Mylex", MLY_OEM_MYLEX}, {"IBM", MLY_OEM_IBM}, {"Hewlett-Packard", MLY_OEM_HP}, {"DEC/Compaq", MLY_OEM_DEC}, {"Siemens", MLY_OEM_SIEMENS}, {"Intel", MLY_OEM_INTEL}, {NULL, 0}, {"unknown OEM", 0} }; static struct mly_code_lookup mly_table_memorytype[] = { {"DRAM", 0x01}, {"EDRAM", 0x02}, {"EDO RAM", 0x03}, {"SDRAM", 0x04}, {NULL, 0}, {"unknown memory", 0} }; static struct mly_code_lookup mly_table_cputype[] = { {"i960CA", 0x01}, {"i960RD", 0x02}, {"i960RN", 0x03}, {"i960RP", 0x04}, {"NorthBay(?)", 0x05}, {"StrongArm", 0x06}, {"i960RM", 0x07}, {NULL, 0}, {"unknown CPU", 0} }; /* * This table is directly derived from the corresponding table in the * Linux driver, and uses a derivative encoding for simplicity's sake. * * The first character of the string determines the format of the message. * * p "physical device : " (physical device status) * s "physical device : " (scsi message or error) * " sense key asc ascq " * " info csi " * l "logical drive : " (logical device status) * m "logical drive : " (logical device message) * * Messages which are typically suppressed have the first character capitalised. * These messages will only be printed if bootverbose is set. * * The second character in the string indicates an action to be taken as a * result of the event. * * r rescan the device for possible state change * */ static struct mly_code_lookup mly_table_event[] = { /* physical device events (0x0000 - 0x007f) */ {"pr online", 0x0001}, {"pr standby", 0x0002}, {"p automatic rebuild started", 0x0005}, {"p manual rebuild started", 0x0006}, {"pr rebuild completed", 0x0007}, {"pr rebuild cancelled", 0x0008}, {"pr rebuild failed for unknown reasons", 0x0009}, {"pr rebuild failed due to new physical device", 0x000a}, {"pr rebuild failed due to logical drive failure", 0x000b}, {"sr offline", 0x000c}, {"pr found", 0x000d}, {"pr gone", 0x000e}, {"p unconfigured", 0x000f}, {"p expand capacity started", 0x0010}, {"pr expand capacity completed", 0x0011}, {"pr expand capacity failed", 0x0012}, {"p parity error", 0x0016}, {"p soft error", 0x0017}, {"p miscellaneous error", 0x0018}, {"p reset", 0x0019}, {"p active spare found", 0x001a}, {"p warm spare found", 0x001b}, {"s sense data received", 0x001c}, {"p initialization started", 0x001d}, {"pr initialization completed", 0x001e}, {"pr initialization failed", 0x001f}, {"pr initialization cancelled", 0x0020}, {"P write recovery failed", 0x0021}, {"p scsi bus reset failed", 0x0022}, {"p double check condition", 0x0023}, {"p device cannot be accessed", 0x0024}, {"p gross error on scsi processor", 0x0025}, {"p bad tag from device", 0x0026}, {"p command timeout", 0x0027}, {"pr system reset", 0x0028}, {"p busy status or parity error", 0x0029}, {"pr host set device to failed state", 0x002a}, {"pr selection timeout", 0x002b}, {"p scsi bus phase error", 0x002c}, {"pr device returned unknown status", 0x002d}, {"pr device not ready", 0x002e}, {"p device not found at startup", 0x002f}, {"p COD write operation failed", 0x0030}, {"p BDT write operation failed", 0x0031}, {"p missing at startup", 0x0039}, {"p start rebuild failed due to physical drive too small", 0x003a}, /* logical device events (0x0080 - 0x00ff) */ {"m consistency check started", 0x0080}, {"mr consistency check completed", 0x0081}, {"mr consistency check cancelled", 0x0082}, {"mr consistency check completed with errors", 0x0083}, {"mr consistency check failed due to logical drive failure", 0x0084}, {"mr consistency check failed due to physical device failure", 0x0085}, {"lr offline", 0x0086}, {"lr critical", 0x0087}, {"lr online", 0x0088}, {"m automatic rebuild started", 0x0089}, {"m manual rebuild started", 0x008a}, {"mr rebuild completed", 0x008b}, {"mr rebuild cancelled", 0x008c}, {"mr rebuild failed for unknown reasons", 0x008d}, {"mr rebuild failed due to new physical device", 0x008e}, {"mr rebuild failed due to logical drive failure", 0x008f}, {"l initialization started", 0x0090}, {"lr initialization completed", 0x0091}, {"lr initialization cancelled", 0x0092}, {"lr initialization failed", 0x0093}, {"lr found", 0x0094}, {"lr gone", 0x0095}, {"l expand capacity started", 0x0096}, {"lr expand capacity completed", 0x0097}, {"lr expand capacity failed", 0x0098}, {"l bad block found", 0x0099}, {"lr size changed", 0x009a}, {"lr type changed", 0x009b}, {"l bad data block found", 0x009c}, {"l read of data block in bdt", 0x009e}, {"l write back data for disk block lost", 0x009f}, /* enclosure management events (0x0100 - 0x017f) */ {"e enclosure %d fan %d failed", 0x0140}, {"e enclosure %d fan %d ok", 0x0141}, {"e enclosure %d fan %d not present", 0x0142}, {"e enclosure %d power supply %d failed", 0x0143}, {"e enclosure %d power supply %d ok", 0x0144}, {"e enclosure %d power supply %d not present", 0x0145}, {"e enclosure %d temperature sensor %d failed", 0x0146}, {"e enclosure %d temperature sensor %d critical", 0x0147}, {"e enclosure %d temperature sensor %d ok", 0x0148}, {"e enclosure %d temperature sensor %d not present", 0x0149}, {"e enclosure %d unit %d access critical", 0x014a}, {"e enclosure %d unit %d access ok", 0x014b}, {"e enclosure %d unit %d access offline", 0x014c}, /* controller events (0x0180 - 0x01ff) */ {"c cache write back error", 0x0181}, {"c battery backup unit found", 0x0188}, {"c battery backup unit charge level low", 0x0189}, {"c battery backup unit charge level ok", 0x018a}, {"c installation aborted", 0x0193}, {"c mirror race recovery in progress", 0x0195}, {"c mirror race on critical drive", 0x0196}, {"c memory soft ecc error", 0x019e}, {"c memory hard ecc error", 0x019f}, {"c battery backup unit failed", 0x01a2}, {NULL, 0}, {"? unknown event code", 0} }; /* * Values here must be 16 characters or less, as they are packed into * the 'product' field in the SCSI inquiry data. */ static struct mly_code_lookup mly_table_device_state[] = { {"offline", MLY_DEVICE_STATE_OFFLINE}, {"unconfigured", MLY_DEVICE_STATE_UNCONFIGURED}, {"online", MLY_DEVICE_STATE_ONLINE}, {"critical", MLY_DEVICE_STATE_CRITICAL}, {"writeonly", MLY_DEVICE_STATE_WRITEONLY}, {"standby", MLY_DEVICE_STATE_STANDBY}, {"missing", MLY_DEVICE_STATE_MISSING}, {NULL, 0}, {"unknown state", 0} }; /* * Values here must be 8 characters or less, as they are packed into * the 'vendor' field in the SCSI inquiry data. */ static struct mly_code_lookup mly_table_device_type[] = { {"RAID 0", MLY_DEVICE_TYPE_RAID0}, {"RAID 1", MLY_DEVICE_TYPE_RAID1}, {"RAID 3", MLY_DEVICE_TYPE_RAID3}, /* right asymmetric parity */ {"RAID 5", MLY_DEVICE_TYPE_RAID5}, /* right asymmetric parity */ {"RAID 6", MLY_DEVICE_TYPE_RAID6}, /* Mylex RAID 6 */ {"RAID 7", MLY_DEVICE_TYPE_RAID7}, /* JBOD */ {"SPAN", MLY_DEVICE_TYPE_NEWSPAN}, /* New Mylex SPAN */ {"RAID 3", MLY_DEVICE_TYPE_RAID3F}, /* fixed parity */ {"RAID 3", MLY_DEVICE_TYPE_RAID3L}, /* left symmetric parity */ {"SPAN", MLY_DEVICE_TYPE_SPAN}, /* current spanning implementation */ {"RAID 5", MLY_DEVICE_TYPE_RAID5L}, /* left symmetric parity */ {"RAID E", MLY_DEVICE_TYPE_RAIDE}, /* concatenation */ {"PHYSICAL", MLY_DEVICE_TYPE_PHYSICAL}, /* physical device */ {NULL, 0}, {"UNKNOWN", 0} }; #if 0 static struct mly_code_lookup mly_table_stripe_size[] = { {"NONE", MLY_STRIPE_ZERO}, {"512B", MLY_STRIPE_512b}, {"1k", MLY_STRIPE_1k}, {"2k", MLY_STRIPE_2k}, {"4k", MLY_STRIPE_4k}, {"8k", MLY_STRIPE_8k}, {"16k", MLY_STRIPE_16k}, {"32k", MLY_STRIPE_32k}, {"64k", MLY_STRIPE_64k}, {"128k", MLY_STRIPE_128k}, {"256k", MLY_STRIPE_256k}, {"512k", MLY_STRIPE_512k}, {"1M", MLY_STRIPE_1m}, {NULL, 0}, {"unknown", 0} }; static struct mly_code_lookup mly_table_cacheline_size[] = { {"NONE", MLY_CACHELINE_ZERO}, {"512B", MLY_CACHELINE_512b}, {"1k", MLY_CACHELINE_1k}, {"2k", MLY_CACHELINE_2k}, {"4k", MLY_CACHELINE_4k}, {"8k", MLY_CACHELINE_8k}, {"16k", MLY_CACHELINE_16k}, {"32k", MLY_CACHELINE_32k}, {"64k", MLY_CACHELINE_64k}, {NULL, 0}, {"unknown", 0} }; #endif