/*- * SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0 * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include /** * @file * @brief This file contains the method implementations required to * translate the SCSI mode sense 6-byte commands. */ #if !defined(DISABLE_SATI_MODE_SENSE) #include #include #include #include #include #include #include //****************************************************************************** //* P R I V A T E M E T H O D S //****************************************************************************** /** * @brief This method builds the mode parameter header for a 6-byte SCSI * mode sense data response. The parameter header is 4 bytes in * size. * For more information on the parameters passed to this method, * please reference sati_translate_command(). * * @param[in] identify This parameter specifies the ATA remote device's * received IDENTIFY DEVICE data. * @param[in] mode_data_length This parameter specifies the amount of data * to be returned as part of this mode sense request. * * @return This method returns the number of bytes written into the * data buffer. */ static U32 sati_mode_sense_6_build_header( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * scsi_io, ATA_IDENTIFY_DEVICE_DATA_T * identify, U8 mode_data_length ) { U8 * cdb = sati_cb_get_cdb_address(scsi_io); // Fill in the length of the mode parameter data returned (do not include // the size of the mode data length field in the total). sati_set_data_byte(sequence, scsi_io, 0, (U8)mode_data_length-1); // Medium Type is 0 for SBC devices sati_set_data_byte(sequence, scsi_io, 1, SCSI_MODE_HEADER_MEDIUM_TYPE_SBC); // Write Protect (WP), Rsvd, DPOFUA, Rsvd if (sequence->device->capabilities & SATI_DEVICE_CAP_DMA_FUA_ENABLE) sati_set_data_byte(sequence,scsi_io,2,SCSI_MODE_SENSE_HEADER_FUA_ENABLE); else sati_set_data_byte(sequence, scsi_io, 2, 0); // Set the block descriptor length if block descriptors are utilized. if (sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SENSE_DBD_ENABLE) sati_set_data_byte(sequence, scsi_io, 3, 0); else sati_set_data_byte( sequence, scsi_io, 3, SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH ); return SCSI_MODE_SENSE_6_HEADER_LENGTH; } /** * @brief This method perform the data translation common to all SCSI MODE * SENSE 6 byte commands. This includes building the mode page * header and block descriptor (if requested). * For more information on the parameters passed to this method, * please reference sati_translate_command(). * * @param[in] identify This parameter specifies the remote device's IDENTIFY * DEVICE data to be used during translation. * @param[in] transfer_length This parameter specifies the size of the * mode page (including header & block descriptor). * * @return This method returns the number of bytes written into the user's * mode page data buffer. */ static U32 sati_mode_sense_6_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, ATA_IDENTIFY_DEVICE_DATA_T * identify, void * scsi_io, U8 transfer_length ) { U8 * cdb = sati_cb_get_cdb_address(scsi_io); U32 offset; offset = sati_mode_sense_6_build_header( sequence, scsi_io, identify, transfer_length ); // Determine if the caller disabled block descriptors (DBD). If not, // then generate a block descriptor. if ((sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SENSE_DBD_ENABLE) == 0) offset += sati_mode_sense_build_std_block_descriptor( sequence, scsi_io, identify, offset ); return offset; } //****************************************************************************** //* P R O T E C T E D M E T H O D S //****************************************************************************** /** * @brief This method will translate the SCSI mode sense 6 byte command * into corresponding ATA commands. If the command is well-formed, * then the translation will result in an ATA IDENTIFY DEVICE * command. * For more information on the parameters passed to this method, * please reference sati_translate_command(). * * @return Indicate if the command translation succeeded. * @retval SCI_SUCCESS This is returned if the command translation was * successful. * @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if * sense data has been created as a result of something specified * in the CDB. */ SATI_STATUS sati_mode_sense_6_translate_command( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * scsi_io, void * ata_io ) { U8 * cdb = sati_cb_get_cdb_address(scsi_io); // Set the data length based on the allocation length field in the CDB. sequence->allocation_length = sati_get_cdb_byte(cdb, 4); return sati_mode_sense_translate_command(sequence, scsi_io, ata_io, 6); } /** * @brief This method will perform data translation from the supplied ATA * input data (i.e. an ATA IDENTIFY DEVICE block) into a CACHING * mode page format. The data will be written into the user's mode * page data buffer. This function operates specifically for MODE * SENSE 6 commands. * For more information on the parameters passed to this method, * please reference sati_translate_data(). * * @return none. */ void sati_mode_sense_6_caching_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * ata_input_data, void * scsi_io ) { ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) ata_input_data; U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) + SCSI_MODE_PAGE_08_LENGTH; U32 page_offset = sati_mode_sense_6_translate_data( sequence, identify, scsi_io, data_length ); sati_mode_sense_caching_translate_data( sequence, scsi_io, identify, page_offset ); } /** * @brief This method will perform data translation from the supplied ATA * input data (i.e. an ATA IDENTIFY DEVICE block) into a INFORMATIONAL * EXCEPTIONS CONTROL mode page format. The data will be written * into the user's mode page data buffer. This function operates * specifically for MODE SENSE 6 commands. * For more information on the parameters passed to this method, * please reference sati_translate_data(). * * @return none. */ void sati_mode_sense_6_informational_excp_control_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * ata_input_data, void * scsi_io ) { ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) ata_input_data; U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) + SCSI_MODE_PAGE_1C_LENGTH; U32 page_offset = sati_mode_sense_6_translate_data( sequence, identify, scsi_io, data_length ); sati_mode_sense_informational_excp_control_translate_data( sequence, scsi_io, identify, page_offset ); } /** * @brief This method will perform data translation from the supplied ATA * input data (i.e. an ATA IDENTIFY DEVICE block) into a DISCONNECT * RECONNECT mode page format. The data will be written * into the user's mode page data buffer. This function operates * specifically for MODE SENSE 6 commands. * For more information on the parameters passed to this method, * please reference sati_translate_data(). * * @return none. */ void sati_mode_sense_6_disconnect_reconnect_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * ata_input_data, void * scsi_io ) { ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) ata_input_data; U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) + SCSI_MODE_PAGE_02_LENGTH ; U32 page_offset = sati_mode_sense_6_translate_data( sequence, identify, scsi_io, data_length ); sati_mode_sense_disconnect_reconnect_translate_data( sequence, scsi_io, identify, page_offset ); } /** * @brief This method will perform data translation from the supplied ATA * input data (i.e. an ATA IDENTIFY DEVICE block) into a READ WRITE ERROR * mode page format. The data will be written * into the user's mode page data buffer. This function operates * specifically for MODE SENSE 6 commands. * For more information on the parameters passed to this method, * please reference sati_translate_data(). * * @return none. */ void sati_mode_sense_6_read_write_error_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * ata_input_data, void * scsi_io ) { ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) ata_input_data; U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) + SCSI_MODE_PAGE_01_LENGTH; U32 page_offset = sati_mode_sense_6_translate_data( sequence, identify, scsi_io, data_length ); sati_mode_sense_read_write_error_translate_data( sequence, scsi_io, identify, page_offset ); } /** * @brief This method will perform data translation from the supplied ATA * input data (i.e. an ATA IDENTIFY DEVICE block) into a CONTROL * mode page format. The data will be written * into the user's mode page data buffer. This function operates * specifically for MODE SENSE 6 commands. * For more information on the parameters passed to this method, * please reference sati_translate_data(). * * @return none. */ void sati_mode_sense_6_control_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * ata_input_data, void * scsi_io ) { ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) ata_input_data; U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) + SCSI_MODE_PAGE_0A_LENGTH; U32 page_offset = sati_mode_sense_6_translate_data( sequence, identify, scsi_io, data_length ); sati_mode_sense_control_translate_data( sequence, scsi_io, identify, page_offset ); } /** * @brief This method will perform data translation from the supplied ATA * input data (i.e. an ATA IDENTIFY DEVICE block) into a Power * Condition mode page format. The data will be written * into the user's mode page data buffer. This function operates * specifically for MODE SENSE 6 commands. * For more information on the parameters passed to this method, * please reference sati_translate_data(). * * @return none. */ void sati_mode_sense_6_power_condition_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * ata_input_data, void * scsi_io ) { ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) ata_input_data; U8 data_length; U32 page_offset; data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) + SCSI_MODE_PAGE_1A_LENGTH; page_offset = sati_mode_sense_6_translate_data( sequence, identify, scsi_io, data_length ); sati_mode_sense_power_condition_translate_data( sequence, scsi_io, identify, page_offset ); } /** * @brief This method will perform data translation from the supplied ATA * input data (i.e. an ATA IDENTIFY DEVICE block) into an ALL * PAGES mode page format. The ALL PAGES mode page is basically a * conglomeration of all mode pages and sub-pages into a single * page. The data will be written into the user's mode page * data buffer. This function operates specifically for MODE * SENSE 6 commands. * For more information on the parameters passed to this method, * please reference sati_translate_data(). * * @return none. */ void sati_mode_sense_6_all_pages_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * ata_input_data, void * scsi_io ) { ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) ata_input_data; U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) + SCSI_MODE_PAGE_01_LENGTH + SCSI_MODE_PAGE_02_LENGTH + SCSI_MODE_PAGE_08_LENGTH + SCSI_MODE_PAGE_0A_LENGTH + SCSI_MODE_PAGE_1C_LENGTH; U32 page_offset = sati_mode_sense_6_translate_data( sequence, identify, scsi_io, data_length ); sati_mode_sense_all_pages_translate_data( sequence, scsi_io, identify, page_offset ); } #endif // !defined(DISABLE_SATI_MODE_SENSE)