/*- * SPDX-License-Identifier: BSD-3-Clause * * Copyright (c) 2000-04 ICP vortex GmbH * Copyright (c) 2002-04 Intel Corporation * Copyright (c) 2003-04 Adaptec Inc. * All Rights Reserved * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ /* * * iir.h: Definitions/Constants used by the Intel Integrated RAID driver * * Written by: Achim Leubner * Fixes/Additions: Boji Tony Kannanthanam * * credits: Niklas Hallqvist; OpenBSD driver for the ICP Controllers. * FreeBSD.ORG; Great O/S to work on and for. * * $Id: iir.h 1.6 2004/03/30 10:19:44 achim Exp $" */ #ifndef _IIR_H #define _IIR_H #ifndef _SYS_CDEFS_H_ #error this file needs sys/cdefs.h as a prerequisite #endif #define IIR_DRIVER_VERSION 1 #define IIR_DRIVER_SUBVERSION 5 /* OEM IDs */ #define OEM_ID_ICP 0x941c #define OEM_ID_INTEL 0x8000 #define GDT_VENDOR_ID 0x1119 #define GDT_DEVICE_ID_MIN 0x100 #define GDT_DEVICE_ID_MAX 0x2ff #define GDT_DEVICE_ID_NEWRX 0x300 #define INTEL_VENDOR_ID_IIR 0x8086 #define INTEL_DEVICE_ID_IIR 0x600 #define GDT_MAXBUS 6 /* XXX Why not 5? */ #define GDT_MAX_HDRIVES 100 /* max 100 host drives */ #define GDT_MAXID_FC 127 /* Fibre-channel IDs */ #define GDT_MAXID 16 /* SCSI IDs */ #define GDT_MAXOFFSETS 128 #define GDT_MAXSG 32 /* Max. s/g elements */ #define GDT_PROTOCOL_VERSION 1 #define GDT_LINUX_OS 8 /* Used for cache optimization */ #define GDT_SCATTER_GATHER 1 /* s/g feature */ #define GDT_SECS32 0x1f /* round capacity */ #define GDT_LOCALBOARD 0 /* Board node always 0 */ #define GDT_MAXCMDS 124 #define GDT_SECTOR_SIZE 0x200 /* Always 512 bytes for cache devs */ #define GDT_MAX_EVENTS 0x100 /* event buffer */ /* DPMEM constants */ #define GDT_MPR_MAGIC 0xc0ffee11 #define GDT_IC_HEADER_BYTES 48 #define GDT_IC_QUEUE_BYTES 4 #define GDT_DPMEM_COMMAND_OFFSET \ (GDT_IC_HEADER_BYTES + GDT_IC_QUEUE_BYTES * GDT_MAXOFFSETS) /* geometry constants */ #define GDT_MAXCYLS 1024 #define GDT_HEADS 64 #define GDT_SECS 32 /* mapping 64*32 */ #define GDT_MEDHEADS 127 #define GDT_MEDSECS 63 /* mapping 127*63 */ #define GDT_BIGHEADS 255 #define GDT_BIGSECS 63 /* mapping 255*63 */ /* data direction raw service */ #define GDT_DATA_IN 0x01000000L #define GDT_DATA_OUT 0x00000000L /* Cache/raw service commands */ #define GDT_INIT 0 /* service initialization */ #define GDT_READ 1 /* read command */ #define GDT_WRITE 2 /* write command */ #define GDT_INFO 3 /* information about devices */ #define GDT_FLUSH 4 /* flush dirty cache buffers */ #define GDT_IOCTL 5 /* ioctl command */ #define GDT_DEVTYPE 9 /* additional information */ #define GDT_MOUNT 10 /* mount cache device */ #define GDT_UNMOUNT 11 /* unmount cache device */ #define GDT_SET_FEAT 12 /* set features (scatter/gather) */ #define GDT_GET_FEAT 13 /* get features */ #define GDT_WRITE_THR 16 /* write through */ #define GDT_READ_THR 17 /* read through */ #define GDT_EXT_INFO 18 /* extended info */ #define GDT_RESET 19 /* controller reset */ #define GDT_FREEZE_IO 25 /* freeze all IOs */ #define GDT_UNFREEZE_IO 26 /* unfreeze all IOs */ /* Additional raw service commands */ #define GDT_RESERVE 14 /* reserve device to raw service */ #define GDT_RELEASE 15 /* release device */ #define GDT_RESERVE_ALL 16 /* reserve all devices */ #define GDT_RELEASE_ALL 17 /* release all devices */ #define GDT_RESET_BUS 18 /* reset bus */ #define GDT_SCAN_START 19 /* start device scan */ #define GDT_SCAN_END 20 /* stop device scan */ /* IOCTL command defines */ #define GDT_SCSI_DR_INFO 0x00 /* SCSI drive info */ #define GDT_SCSI_CHAN_CNT 0x05 /* SCSI channel count */ #define GDT_SCSI_DR_LIST 0x06 /* SCSI drive list */ #define GDT_SCSI_DEF_CNT 0x15 /* grown/primary defects */ #define GDT_DSK_STATISTICS 0x4b /* SCSI disk statistics */ #define GDT_IOCHAN_DESC 0x5d /* description of IO channel */ #define GDT_IOCHAN_RAW_DESC 0x5e /* description of raw IO channel */ #define GDT_L_CTRL_PATTERN 0x20000000 /* SCSI IOCTL mask */ #define GDT_ARRAY_INFO 0x12 /* array drive info */ #define GDT_ARRAY_DRV_LIST 0x0f /* array drive list */ #define GDT_LA_CTRL_PATTERN 0x10000000 /* array IOCTL mask */ #define GDT_CACHE_DRV_CNT 0x01 /* cache drive count */ #define GDT_CACHE_DRV_LIST 0x02 /* cache drive list */ #define GDT_CACHE_INFO 0x04 /* cache info */ #define GDT_CACHE_CONFIG 0x05 /* cache configuration */ #define GDT_CACHE_DRV_INFO 0x07 /* cache drive info */ #define GDT_BOARD_FEATURES 0x15 /* controller features */ #define GDT_BOARD_INFO 0x28 /* controller info */ #define GDT_OEM_STR_RECORD 0x84 /* OEM info */ #define GDT_HOST_GET 0x10001 /* get host drive list */ #define GDT_IO_CHANNEL 0x20000 /* default IO channel */ #define GDT_INVALID_CHANNEL 0xffff /* invalid channel */ /* IOCTLs */ #define GDT_IOCTL_GENERAL _IOWR('J', 0, gdt_ucmd_t) /* general IOCTL */ #define GDT_IOCTL_DRVERS _IOR('J', 1, int) /* get driver version */ #define GDT_IOCTL_CTRTYPE _IOWR('J', 2, gdt_ctrt_t) /* get ctr. type */ #define GDT_IOCTL_DRVERS_OLD _IOWR('J', 1, int) /* get driver version */ #define GDT_IOCTL_CTRTYPE_OLD _IOR('J', 2, gdt_ctrt_t) /* get ctr. type */ #define GDT_IOCTL_OSVERS _IOR('J', 3, gdt_osv_t) /* get OS version */ #define GDT_IOCTL_CTRCNT _IOR('J', 5, int) /* get ctr. count */ #define GDT_IOCTL_EVENT _IOWR('J', 8, gdt_event_t) /* get event */ #define GDT_IOCTL_STATIST _IOR('J', 9, gdt_statist_t) /* get statistics */ /* Service errors */ #define GDT_S_OK 1 /* no error */ #define GDT_S_BSY 7 /* controller busy */ #define GDT_S_RAW_SCSI 12 /* raw service: target error */ #define GDT_S_RAW_ILL 0xff /* raw service: illegal */ #define GDT_S_NO_STATUS 0x1000 /* got no status (driver-generated) */ /* Controller services */ #define GDT_SCSIRAWSERVICE 3 #define GDT_CACHESERVICE 9 #define GDT_SCREENSERVICE 11 /* Scatter/gather element */ #define GDT_SG_PTR 0x00 /* u_int32_t, address */ #define GDT_SG_LEN 0x04 /* u_int32_t, length */ #define GDT_SG_SZ 0x08 /* Cache service command */ #define GDT_CACHE_DEVICENO 0x00 /* u_int16_t, number of cache drive */ #define GDT_CACHE_BLOCKNO 0x02 /* u_int32_t, block number */ #define GDT_CACHE_BLOCKCNT 0x06 /* u_int32_t, block count */ #define GDT_CACHE_DESTADDR 0x0a /* u_int32_t, dest. addr. (-1: s/g) */ #define GDT_CACHE_SG_CANZ 0x0e /* u_int32_t, s/g element count */ #define GDT_CACHE_SG_LST 0x12 /* [GDT_MAXSG], s/g list */ #define GDT_CACHE_SZ (0x12 + GDT_MAXSG * GDT_SG_SZ) /* Ioctl command */ #define GDT_IOCTL_PARAM_SIZE 0x00 /* u_int16_t, size of buffer */ #define GDT_IOCTL_SUBFUNC 0x02 /* u_int32_t, ioctl function */ #define GDT_IOCTL_CHANNEL 0x06 /* u_int32_t, device */ #define GDT_IOCTL_P_PARAM 0x0a /* u_int32_t, buffer */ #define GDT_IOCTL_SZ 0x0e /* Screen service defines */ #define GDT_MSG_INV_HANDLE -1 /* special message handle */ #define GDT_MSGLEN 16 /* size of message text */ #define GDT_MSG_SIZE 34 /* size of message structure */ #define GDT_MSG_REQUEST 0 /* async. event. message */ /* Screen service command */ #define GDT_SCREEN_MSG_HANDLE 0x02 /* u_int32_t, message handle */ #define GDT_SCREEN_MSG_ADDR 0x06 /* u_int32_t, message buffer address */ #define GDT_SCREEN_SZ 0x0a /* Screen service message */ #define GDT_SCR_MSG_HANDLE 0x00 /* u_int32_t, message handle */ #define GDT_SCR_MSG_LEN 0x04 /* u_int32_t, size of message */ #define GDT_SCR_MSG_ALEN 0x08 /* u_int32_t, answer length */ #define GDT_SCR_MSG_ANSWER 0x0c /* u_int8_t, answer flag */ #define GDT_SCR_MSG_EXT 0x0d /* u_int8_t, more messages? */ #define GDT_SCR_MSG_RES 0x0e /* u_int16_t, reserved */ #define GDT_SCR_MSG_TEXT 0x10 /* GDT_MSGLEN+2, message text */ #define GDT_SCR_MSG_SZ (0x12 + GDT_MSGLEN) /* Raw service command */ #define GDT_RAW_DIRECTION 0x02 /* u_int32_t, data direction */ #define GDT_RAW_MDISC_TIME 0x06 /* u_int32_t, disc. time (0: none) */ #define GDT_RAW_MCON_TIME 0x0a /* u_int32_t, conn. time (0: none) */ #define GDT_RAW_SDATA 0x0e /* u_int32_t, dest. addr. (-1: s/g) */ #define GDT_RAW_SDLEN 0x12 /* u_int32_t, data length */ #define GDT_RAW_CLEN 0x16 /* u_int32_t, SCSI cmd len (6/10/12) */ #define GDT_RAW_CMD 0x1a /* u_int8_t [12], SCSI command */ #define GDT_RAW_TARGET 0x26 /* u_int8_t, target ID */ #define GDT_RAW_LUN 0x27 /* u_int8_t, LUN */ #define GDT_RAW_BUS 0x28 /* u_int8_t, SCSI bus number */ #define GDT_RAW_PRIORITY 0x29 /* u_int8_t, only 0 used */ #define GDT_RAW_SENSE_LEN 0x2a /* u_int32_t, sense data length */ #define GDT_RAW_SENSE_DATA 0x2e /* u_int32_t, sense data address */ #define GDT_RAW_SG_RANZ 0x36 /* u_int32_t, s/g element count */ #define GDT_RAW_SG_LST 0x3a /* [GDT_MAXSG], s/g list */ #define GDT_RAW_SZ (0x3a + GDT_MAXSG * GDT_SG_SZ) /* Command structure */ #define GDT_CMD_BOARDNODE 0x00 /* u_int32_t, board node (always 0) */ #define GDT_CMD_COMMANDINDEX 0x04 /* u_int32_t, command number */ #define GDT_CMD_OPCODE 0x08 /* u_int16_t, opcode (READ, ...) */ #define GDT_CMD_UNION 0x0a /* cache/screen/raw service command */ #define GDT_CMD_UNION_SZ GDT_RAW_SZ #define GDT_CMD_SZ (0x0a + GDT_CMD_UNION_SZ) /* Command queue entries */ #define GDT_OFFSET 0x00 /* u_int16_t, command offset in the DP RAM */ #define GDT_SERV_ID 0x02 /* u_int16_t, service */ #define GDT_COMM_Q_SZ 0x04 /* Interface area */ #define GDT_S_CMD_INDX 0x00 /* u_int8_t, special command */ #define GDT_S_STATUS 0x01 /* volatile u_int8_t, status special command */ #define GDT_S_INFO 0x04 /* u_int32_t [4], add. info special command */ #define GDT_SEMA0 0x14 /* volatile u_int8_t, command semaphore */ #define GDT_CMD_INDEX 0x18 /* u_int8_t, command number */ #define GDT_STATUS 0x1c /* volatile u_int16_t, command status */ #define GDT_SERVICE 0x1e /* u_int16_t, service (for asynch. events) */ #define GDT_DPR_INFO 0x20 /* u_int32_t [2], additional info */ #define GDT_COMM_QUEUE 0x28 /* command queue */ #define GDT_DPR_CMD (0x30 + GDT_MAXOFFSETS * GDT_COMM_Q_SZ) /* u_int8_t [], commands */ /* I/O channel header */ #define GDT_IOC_VERSION 0x00 /* u_int32_t, version (~0: newest) */ #define GDT_IOC_LIST_ENTRIES 0x04 /* u_int8_t, list entry count */ #define GDT_IOC_FIRST_CHAN 0x05 /* u_int8_t, first channel number */ #define GDT_IOC_LAST_CHAN 0x06 /* u_int8_t, last channel number */ #define GDT_IOC_CHAN_COUNT 0x07 /* u_int8_t, (R) channel count */ #define GDT_IOC_LIST_OFFSET 0x08 /* u_int32_t, offset of list[0] */ #define GDT_IOC_HDR_SZ 0x0c #define GDT_IOC_NEWEST 0xffffffff /* goes into GDT_IOC_VERSION */ /* Get I/O channel description */ #define GDT_IOC_ADDRESS 0x00 /* u_int32_t, channel address */ #define GDT_IOC_TYPE 0x04 /* u_int8_t, type (SCSI/FCSL) */ #define GDT_IOC_LOCAL_NO 0x05 /* u_int8_t, local number */ #define GDT_IOC_FEATURES 0x06 /* u_int16_t, channel features */ #define GDT_IOC_SZ 0x08 /* Get raw I/O channel description */ #define GDT_RAWIOC_PROC_ID 0x00 /* u_int8_t, processor id */ #define GDT_RAWIOC_PROC_DEFECT 0x01 /* u_int8_t, defect? */ #define GDT_RAWIOC_SZ 0x04 /* Get SCSI channel count */ #define GDT_GETCH_CHANNEL_NO 0x00 /* u_int32_t, channel number */ #define GDT_GETCH_DRIVE_CNT 0x04 /* u_int32_t, drive count */ #define GDT_GETCH_SIOP_ID 0x08 /* u_int8_t, SCSI processor ID */ #define GDT_GETCH_SIOP_STATE 0x09 /* u_int8_t, SCSI processor state */ #define GDT_GETCH_SZ 0x0a /* Cache info/config IOCTL structures */ #define GDT_CPAR_VERSION 0x00 /* u_int32_t, firmware version */ #define GDT_CPAR_STATE 0x04 /* u_int16_t, cache state (on/off) */ #define GDT_CPAR_STRATEGY 0x06 /* u_int16_t, cache strategy */ #define GDT_CPAR_WRITE_BACK 0x08 /* u_int16_t, write back (on/off) */ #define GDT_CPAR_BLOCK_SIZE 0x0a /* u_int16_t, cache block size */ #define GDT_CPAR_SZ 0x0c #define GDT_CSTAT_CSIZE 0x00 /* u_int32_t, cache size */ #define GDT_CSTAT_READ_CNT 0x04 /* u_int32_t, read counter */ #define GDT_CSTAT_WRITE_CNT 0x08 /* u_int32_t, write counter */ #define GDT_CSTAT_TR_HITS 0x0c /* u_int32_t, track hits */ #define GDT_CSTAT_SEC_HITS 0x10 /* u_int32_t, sector hits */ #define GDT_CSTAT_SEC_MISS 0x14 /* u_int32_t, sector misses */ #define GDT_CSTAT_SZ 0x18 /* Get cache info */ #define GDT_CINFO_CPAR 0x00 #define GDT_CINFO_CSTAT GDT_CPAR_SZ #define GDT_CINFO_SZ (GDT_CPAR_SZ + GDT_CSTAT_SZ) /* Get board info */ #define GDT_BINFO_SER_NO 0x00 /* u_int32_t, serial number */ #define GDT_BINFO_OEM_ID 0x04 /* u_int8_t [2], OEM ID */ #define GDT_BINFO_EP_FLAGS 0x06 /* u_int16_t, eprom flags */ #define GDT_BINFO_PROC_ID 0x08 /* u_int32_t, processor ID */ #define GDT_BINFO_MEMSIZE 0x0c /* u_int32_t, memory size (bytes) */ #define GDT_BINFO_MEM_BANKS 0x10 /* u_int8_t, memory banks */ #define GDT_BINFO_CHAN_TYPE 0x11 /* u_int8_t, channel type */ #define GDT_BINFO_CHAN_COUNT 0x12 /* u_int8_t, channel count */ #define GDT_BINFO_RDONGLE_PRES 0x13 /* u_int8_t, dongle present */ #define GDT_BINFO_EPR_FW_VER 0x14 /* u_int32_t, (eprom) firmware ver */ #define GDT_BINFO_UPD_FW_VER 0x18 /* u_int32_t, (update) firmware ver */ #define GDT_BINFO_UPD_REVISION 0x1c /* u_int32_t, update revision */ #define GDT_BINFO_TYPE_STRING 0x20 /* char [16], controller name */ #define GDT_BINFO_RAID_STRING 0x30 /* char [16], RAID firmware name */ #define GDT_BINFO_UPDATE_PRES 0x40 /* u_int8_t, update present? */ #define GDT_BINFO_XOR_PRES 0x41 /* u_int8_t, XOR engine present */ #define GDT_BINFO_PROM_TYPE 0x42 /* u_int8_t, ROM type (eprom/flash) */ #define GDT_BINFO_PROM_COUNT 0x43 /* u_int8_t, number of ROM devices */ #define GDT_BINFO_DUP_PRES 0x44 /* u_int32_t, duplexing module pres? */ #define GDT_BINFO_CHAN_PRES 0x48 /* u_int32_t, # of exp. channels */ #define GDT_BINFO_MEM_PRES 0x4c /* u_int32_t, memory expansion inst? */ #define GDT_BINFO_FT_BUS_SYSTEM 0x50 /* u_int8_t, fault bus supported? */ #define GDT_BINFO_SUBTYPE_VALID 0x51 /* u_int8_t, board_subtype valid */ #define GDT_BINFO_BOARD_SUBTYPE 0x52 /* u_int8_t, subtype/hardware level */ #define GDT_BINFO_RAMPAR_PRES 0x53 /* u_int8_t, RAM parity check hw? */ #define GDT_BINFO_SZ 0x54 /* Get board features */ #define GDT_BFEAT_CHAINING 0x00 /* u_int8_t, chaining supported */ #define GDT_BFEAT_STRIPING 0x01 /* u_int8_t, striping (RAID-0) supp. */ #define GDT_BFEAT_MIRRORING 0x02 /* u_int8_t, mirroring (RAID-1) supp */ #define GDT_BFEAT_RAID 0x03 /* u_int8_t, RAID-4/5/10 supported */ #define GDT_BFEAT_SZ 0x04 /* Other defines */ #define GDT_ASYNCINDEX 0 /* command index asynchronous event */ #define GDT_SPEZINDEX 1 /* command index unknown service */ /* Debugging */ #ifdef GDT_DEBUG #define GDT_D_INTR 0x01 #define GDT_D_MISC 0x02 #define GDT_D_CMD 0x04 #define GDT_D_QUEUE 0x08 #define GDT_D_TIMEOUT 0x10 #define GDT_D_INIT 0x20 #define GDT_D_INVALID 0x40 #define GDT_D_DEBUG 0x80 extern int gdt_debug; #ifdef __SERIAL__ extern int ser_printf(const char *fmt, ...); #define GDT_DPRINTF(mask, args) if (gdt_debug & (mask)) ser_printf args #else #define GDT_DPRINTF(mask, args) if (gdt_debug & (mask)) printf args #endif #else #define GDT_DPRINTF(mask, args) #endif /* Miscellaneous constants */ #define GDT_RETRIES 100000000 /* 100000 * 1us = 100s */ #define GDT_TIMEOUT 100000000 /* 100000 * 1us = 100s */ #define GDT_POLL_TIMEOUT 10000000 /* 10000 * 1us = 10s */ #define GDT_WATCH_TIMEOUT 10000000 /* 10000 * 1us = 10s */ #define GDT_SCRATCH_SZ 3072 /* 3KB scratch buffer */ /* Map minor numbers to device identity */ #define LUN_MASK 0x0007 #define TARGET_MASK 0x03f8 #define BUS_MASK 0x1c00 #define HBA_MASK 0xe000 #define minor2lun(minor) ( minor & LUN_MASK ) #define minor2target(minor) ( (minor & TARGET_MASK) >> 3 ) #define minor2bus(minor) ( (minor & BUS_MASK) >> 10 ) #define minor2hba(minor) ( (minor & HBA_MASK) >> 13 ) #define hba2minor(hba) ( (hba << 13) & HBA_MASK ) /* struct for GDT_IOCTL_GENERAL */ #pragma pack(1) typedef struct gdt_ucmd { u_int16_t io_node; u_int16_t service; u_int32_t timeout; u_int16_t status; u_int32_t info; u_int32_t BoardNode; /* board node (always 0) */ u_int32_t CommandIndex; /* command number */ u_int16_t OpCode; /* the command (READ,..) */ union { struct { u_int16_t DeviceNo; /* number of cache drive */ u_int32_t BlockNo; /* block number */ u_int32_t BlockCnt; /* block count */ void *DestAddr; /* data */ } cache; /* cache service cmd. str. */ struct { u_int16_t param_size; /* size of p_param buffer */ u_int32_t subfunc; /* IOCTL function */ u_int32_t channel; /* device */ void *p_param; /* data */ } ioctl; /* IOCTL command structure */ struct { u_int16_t reserved; u_int32_t direction; /* data direction */ u_int32_t mdisc_time; /* disc. time (0: no timeout)*/ u_int32_t mcon_time; /* connect time(0: no to.) */ void *sdata; /* dest. addr. (if s/g: -1) */ u_int32_t sdlen; /* data length (bytes) */ u_int32_t clen; /* SCSI cmd. length(6,10,12) */ u_int8_t cmd[12]; /* SCSI command */ u_int8_t target; /* target ID */ u_int8_t lun; /* LUN */ u_int8_t bus; /* SCSI bus number */ u_int8_t priority; /* only 0 used */ u_int32_t sense_len; /* sense data length */ void *sense_data; /* sense data addr. */ u_int32_t link_p; /* linked cmds (not supp.) */ } raw; /* raw service cmd. struct. */ } u; u_int8_t data[GDT_SCRATCH_SZ]; int complete_flag; TAILQ_ENTRY(gdt_ucmd) links; } gdt_ucmd_t; /* struct for GDT_IOCTL_CTRTYPE */ typedef struct gdt_ctrt { u_int16_t io_node; u_int16_t oem_id; u_int16_t type; u_int32_t info; u_int8_t access; u_int8_t remote; u_int16_t ext_type; u_int16_t device_id; u_int16_t sub_device_id; } gdt_ctrt_t; /* struct for GDT_IOCTL_OSVERS */ typedef struct gdt_osv { u_int8_t oscode; u_int8_t version; u_int8_t subversion; u_int16_t revision; char name[64]; } gdt_osv_t; /* OEM */ #define GDT_OEM_VERSION 0x00 #define GDT_OEM_BUFSIZE 0x0c typedef struct { u_int32_t ctl_version; u_int32_t file_major_version; u_int32_t file_minor_version; u_int32_t buffer_size; u_int32_t cpy_count; u_int32_t ext_error; u_int32_t oem_id; u_int32_t board_id; } gdt_oem_param_t; typedef struct { char product_0_1_name[16]; char product_4_5_name[16]; char product_cluster_name[16]; char product_reserved[16]; char scsi_cluster_target_vendor_id[16]; char cluster_raid_fw_name[16]; char oem_brand_name[16]; char oem_raid_type[16]; char bios_type[13]; char bios_title[50]; char oem_company_name[37]; u_int32_t pci_id_1; u_int32_t pci_id_2; char validation_status[80]; char reserved_1[4]; char scsi_host_drive_inquiry_vendor_id[16]; char library_file_template[32]; char tool_name_1[32]; char tool_name_2[32]; char tool_name_3[32]; char oem_contact_1[84]; char oem_contact_2[84]; char oem_contact_3[84]; } gdt_oem_record_t; typedef struct { gdt_oem_param_t parameters; gdt_oem_record_t text; } gdt_oem_str_record_t; /* controller event structure */ #define GDT_ES_ASYNC 1 #define GDT_ES_DRIVER 2 #define GDT_ES_TEST 3 #define GDT_ES_SYNC 4 typedef struct { u_int16_t size; /* size of structure */ union { char stream[16]; struct { u_int16_t ionode; u_int16_t service; u_int32_t index; } driver; struct { u_int16_t ionode; u_int16_t service; u_int16_t status; u_int32_t info; u_int8_t scsi_coord[3]; } async; struct { u_int16_t ionode; u_int16_t service; u_int16_t status; u_int32_t info; u_int16_t hostdrive; u_int8_t scsi_coord[3]; u_int8_t sense_key; } sync; struct { u_int32_t l1, l2, l3, l4; } test; } eu; u_int32_t severity; u_int8_t event_string[256]; } gdt_evt_data; /* dvrevt structure */ typedef struct { u_int32_t first_stamp; u_int32_t last_stamp; u_int16_t same_count; u_int16_t event_source; u_int16_t event_idx; u_int8_t application; u_int8_t reserved; gdt_evt_data event_data; } gdt_evt_str; /* struct for GDT_IOCTL_EVENT */ typedef struct gdt_event { int erase; int handle; gdt_evt_str dvr; } gdt_event_t; /* struct for GDT_IOCTL_STATIST */ typedef struct gdt_statist { u_int16_t io_count_act; u_int16_t io_count_max; u_int16_t req_queue_act; u_int16_t req_queue_max; u_int16_t cmd_index_act; u_int16_t cmd_index_max; u_int16_t sg_count_act; u_int16_t sg_count_max; } gdt_statist_t; #pragma pack() /* Context structure for interrupt services */ struct gdt_intr_ctx { u_int32_t info, info2; u_int16_t cmd_status, service; u_int8_t istatus; }; /* softc structure */ struct gdt_softc { device_t sc_devnode; struct mtx sc_lock; int sc_hanum; int sc_class; /* Controller class */ #define GDT_MPR 0x05 #define GDT_CLASS_MASK 0x07 #define GDT_FC 0x10 #define GDT_CLASS(gdt) ((gdt)->sc_class & GDT_CLASS_MASK) int sc_bus, sc_slot; u_int16_t sc_vendor; u_int16_t sc_device, sc_subdevice; u_int16_t sc_fw_vers; int sc_init_level; int sc_state; #define GDT_NORMAL 0x00 #define GDT_POLLING 0x01 #define GDT_SHUTDOWN 0x02 #define GDT_POLL_WAIT 0x80 struct cdev *sc_dev; struct resource *sc_dpmem; bus_dma_tag_t sc_parent_dmat; bus_dma_tag_t sc_buffer_dmat; bus_dma_tag_t sc_gcscratch_dmat; bus_dmamap_t sc_gcscratch_dmamap; bus_addr_t sc_gcscratch_busbase; struct gdt_ccb *sc_gccbs; u_int8_t *sc_gcscratch; SLIST_HEAD(, gdt_ccb) sc_free_gccb, sc_pending_gccb; TAILQ_HEAD(, ccb_hdr) sc_ccb_queue; TAILQ_HEAD(, gdt_ucmd) sc_ucmd_queue; u_int16_t sc_ic_all_size; u_int16_t sc_cmd_off; u_int16_t sc_cmd_cnt; u_int32_t sc_info; u_int32_t sc_info2; u_int16_t sc_status; u_int16_t sc_service; u_int8_t sc_bus_cnt; u_int8_t sc_virt_bus; u_int8_t sc_bus_id[GDT_MAXBUS]; u_int8_t sc_more_proc; struct { u_int8_t hd_present; u_int8_t hd_is_logdrv; u_int8_t hd_is_arraydrv; u_int8_t hd_is_master; u_int8_t hd_is_parity; u_int8_t hd_is_hotfix; u_int8_t hd_master_no; u_int8_t hd_lock; u_int8_t hd_heads; u_int8_t hd_secs; u_int16_t hd_devtype; u_int32_t hd_size; u_int8_t hd_ldr_no; u_int8_t hd_rw_attribs; u_int32_t hd_start_sec; } sc_hdr[GDT_MAX_HDRIVES]; u_int16_t sc_raw_feat; u_int16_t sc_cache_feat; gdt_evt_data sc_dvr; char oem_name[8]; struct cam_sim *sims[GDT_MAXBUS]; struct cam_path *paths[GDT_MAXBUS]; void (*sc_copy_cmd)(struct gdt_softc *, struct gdt_ccb *); u_int8_t (*sc_get_status)(struct gdt_softc *); void (*sc_intr)(struct gdt_softc *, struct gdt_intr_ctx *); void (*sc_release_event)(struct gdt_softc *); void (*sc_set_sema0)(struct gdt_softc *); int (*sc_test_busy)(struct gdt_softc *); TAILQ_ENTRY(gdt_softc) links; }; /* * A command control block, one for each corresponding command index of the * controller. */ struct gdt_ccb { u_int8_t *gc_scratch; bus_addr_t gc_scratch_busbase; union ccb *gc_ccb; gdt_ucmd_t *gc_ucmd; bus_dmamap_t gc_dmamap; struct callout gc_timeout; int gc_map_flag; u_int8_t gc_service; u_int8_t gc_cmd_index; u_int8_t gc_flags; #define GDT_GCF_UNUSED 0 #define GDT_GCF_INTERNAL 1 #define GDT_GCF_SCREEN 2 #define GDT_GCF_SCSI 3 #define GDT_GCF_IOCTL 4 u_int16_t gc_cmd_len; u_int8_t gc_cmd[GDT_CMD_SZ]; SLIST_ENTRY(gdt_ccb) sle; }; int iir_init(struct gdt_softc *); void iir_free(struct gdt_softc *); void iir_attach(struct gdt_softc *); void iir_intr(void *arg); #ifdef __CC_SUPPORTS___INLINE__ /* These all require correctly aligned buffers */ static __inline__ void gdt_enc16(u_int8_t *, u_int16_t); static __inline__ void gdt_enc32(u_int8_t *, u_int32_t); static __inline__ u_int16_t gdt_dec16(u_int8_t *); static __inline__ u_int32_t gdt_dec32(u_int8_t *); static __inline__ void gdt_enc16(u_int8_t *addr, u_int16_t value) { *(u_int16_t *)addr = htole16(value); } static __inline__ void gdt_enc32(u_int8_t *addr, u_int32_t value) { *(u_int32_t *)addr = htole32(value); } static __inline__ u_int16_t gdt_dec16(u_int8_t *addr) { return le16toh(*(u_int16_t *)addr); } static __inline__ u_int32_t gdt_dec32(u_int8_t *addr) { return le32toh(*(u_int32_t *)addr); } #endif extern u_int8_t gdt_polling; struct cdev *gdt_make_dev(struct gdt_softc *gdt); void gdt_destroy_dev(struct cdev *dev); void gdt_next(struct gdt_softc *gdt); void gdt_free_ccb(struct gdt_softc *gdt, struct gdt_ccb *gccb); void gdt_store_event(u_int16_t source, u_int16_t idx, gdt_evt_data *evt); int gdt_read_event(int handle, gdt_evt_str *estr); void gdt_readapp_event(u_int8_t app, gdt_evt_str *estr); void gdt_clear_events(void); #endif