/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2007 Scott Long * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * scsi_sg peripheral driver. This driver is meant to implement the Linux * SG passthrough interface for SCSI. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include typedef enum { SG_FLAG_LOCKED = 0x01, SG_FLAG_INVALID = 0x02 } sg_flags; typedef enum { SG_STATE_NORMAL } sg_state; typedef enum { SG_RDWR_FREE, SG_RDWR_INPROG, SG_RDWR_DONE } sg_rdwr_state; typedef enum { SG_CCB_RDWR_IO } sg_ccb_types; #define ccb_type ppriv_field0 #define ccb_rdwr ppriv_ptr1 struct sg_rdwr { TAILQ_ENTRY(sg_rdwr) rdwr_link; int tag; int state; int buf_len; char *buf; union ccb *ccb; union { struct sg_header hdr; struct sg_io_hdr io_hdr; } hdr; }; struct sg_softc { sg_state state; sg_flags flags; int open_count; u_int maxio; struct devstat *device_stats; TAILQ_HEAD(, sg_rdwr) rdwr_done; struct cdev *dev; int sg_timeout; int sg_user_timeout; uint8_t pd_type; union ccb saved_ccb; }; static d_open_t sgopen; static d_close_t sgclose; static d_ioctl_t sgioctl; static d_write_t sgwrite; static d_read_t sgread; static periph_init_t sginit; static periph_ctor_t sgregister; static periph_oninv_t sgoninvalidate; static periph_dtor_t sgcleanup; static void sgasync(void *callback_arg, uint32_t code, struct cam_path *path, void *arg); static void sgdone(struct cam_periph *periph, union ccb *done_ccb); static int sgsendccb(struct cam_periph *periph, union ccb *ccb); static int sgsendrdwr(struct cam_periph *periph, union ccb *ccb); static int sgerror(union ccb *ccb, uint32_t cam_flags, uint32_t sense_flags); static void sg_scsiio_status(struct ccb_scsiio *csio, u_short *hoststat, u_short *drvstat); static int scsi_group_len(u_char cmd); static struct periph_driver sgdriver = { sginit, "sg", TAILQ_HEAD_INITIALIZER(sgdriver.units), /* gen */ 0 }; PERIPHDRIVER_DECLARE(sg, sgdriver); static struct cdevsw sg_cdevsw = { .d_version = D_VERSION, .d_flags = D_TRACKCLOSE, .d_open = sgopen, .d_close = sgclose, .d_ioctl = sgioctl, .d_write = sgwrite, .d_read = sgread, .d_name = "sg", }; static int sg_version = 30125; static void sginit(void) { cam_status status; /* * Install a global async callback. This callback will receive aync * callbacks like "new device found". */ status = xpt_register_async(AC_FOUND_DEVICE, sgasync, NULL, NULL); if (status != CAM_REQ_CMP) { printf("sg: Failed to attach master async callbac " "due to status 0x%x!\n", status); } } static void sgdevgonecb(void *arg) { struct cam_periph *periph; struct sg_softc *softc; struct mtx *mtx; int i; periph = (struct cam_periph *)arg; mtx = cam_periph_mtx(periph); mtx_lock(mtx); softc = (struct sg_softc *)periph->softc; KASSERT(softc->open_count >= 0, ("Negative open count %d", softc->open_count)); /* * When we get this callback, we will get no more close calls from * devfs. So if we have any dangling opens, we need to release the * reference held for that particular context. */ for (i = 0; i < softc->open_count; i++) cam_periph_release_locked(periph); softc->open_count = 0; /* * Release the reference held for the device node, it is gone now. */ cam_periph_release_locked(periph); /* * We reference the lock directly here, instead of using * cam_periph_unlock(). The reason is that the final call to * cam_periph_release_locked() above could result in the periph * getting freed. If that is the case, dereferencing the periph * with a cam_periph_unlock() call would cause a page fault. */ mtx_unlock(mtx); } static void sgoninvalidate(struct cam_periph *periph) { struct sg_softc *softc; softc = (struct sg_softc *)periph->softc; /* * Deregister any async callbacks. */ xpt_register_async(0, sgasync, periph, periph->path); softc->flags |= SG_FLAG_INVALID; /* * Tell devfs this device has gone away, and ask for a callback * when it has cleaned up its state. */ destroy_dev_sched_cb(softc->dev, sgdevgonecb, periph); /* * XXX Return all queued I/O with ENXIO. * XXX Handle any transactions queued to the card * with XPT_ABORT_CCB. */ } static void sgcleanup(struct cam_periph *periph) { struct sg_softc *softc; softc = (struct sg_softc *)periph->softc; devstat_remove_entry(softc->device_stats); free(softc, M_DEVBUF); } static void sgasync(void *callback_arg, uint32_t code, struct cam_path *path, void *arg) { struct cam_periph *periph; periph = (struct cam_periph *)callback_arg; switch (code) { case AC_FOUND_DEVICE: { struct ccb_getdev *cgd; cam_status status; cgd = (struct ccb_getdev *)arg; if (cgd == NULL) break; if (cgd->protocol != PROTO_SCSI) break; /* * Allocate a peripheral instance for this device and * start the probe process. */ status = cam_periph_alloc(sgregister, sgoninvalidate, sgcleanup, NULL, "sg", CAM_PERIPH_BIO, path, sgasync, AC_FOUND_DEVICE, cgd); if ((status != CAM_REQ_CMP) && (status != CAM_REQ_INPROG)) { const struct cam_status_entry *entry; entry = cam_fetch_status_entry(status); printf("sgasync: Unable to attach new device " "due to status %#x: %s\n", status, entry ? entry->status_text : "Unknown"); } break; } default: cam_periph_async(periph, code, path, arg); break; } } static cam_status sgregister(struct cam_periph *periph, void *arg) { struct sg_softc *softc; struct ccb_getdev *cgd; struct ccb_pathinq cpi; struct make_dev_args args; int no_tags, error; cgd = (struct ccb_getdev *)arg; if (cgd == NULL) { printf("sgregister: no getdev CCB, can't register device\n"); return (CAM_REQ_CMP_ERR); } softc = malloc(sizeof(*softc), M_DEVBUF, M_ZERO | M_NOWAIT); if (softc == NULL) { printf("sgregister: Unable to allocate softc\n"); return (CAM_REQ_CMP_ERR); } softc->state = SG_STATE_NORMAL; softc->pd_type = SID_TYPE(&cgd->inq_data); softc->sg_timeout = SG_DEFAULT_TIMEOUT / SG_DEFAULT_HZ * hz; softc->sg_user_timeout = SG_DEFAULT_TIMEOUT; TAILQ_INIT(&softc->rdwr_done); periph->softc = softc; xpt_path_inq(&cpi, periph->path); if (cpi.maxio == 0) softc->maxio = DFLTPHYS; /* traditional default */ else if (cpi.maxio > maxphys) softc->maxio = maxphys; /* for safety */ else softc->maxio = cpi.maxio; /* real value */ /* * We pass in 0 for all blocksize, since we don't know what the * blocksize of the device is, if it even has a blocksize. */ cam_periph_unlock(periph); no_tags = (cgd->inq_data.flags & SID_CmdQue) == 0; softc->device_stats = devstat_new_entry("sg", periph->unit_number, 0, DEVSTAT_NO_BLOCKSIZE | (no_tags ? DEVSTAT_NO_ORDERED_TAGS : 0), softc->pd_type | XPORT_DEVSTAT_TYPE(cpi.transport) | DEVSTAT_TYPE_PASS, DEVSTAT_PRIORITY_PASS); /* * Acquire a reference to the periph before we create the devfs * instance for it. We'll release this reference once the devfs * instance has been freed. */ if (cam_periph_acquire(periph) != 0) { xpt_print(periph->path, "%s: lost periph during " "registration!\n", __func__); cam_periph_lock(periph); return (CAM_REQ_CMP_ERR); } /* Register the device */ make_dev_args_init(&args); args.mda_devsw = &sg_cdevsw; args.mda_unit = periph->unit_number; args.mda_uid = UID_ROOT; args.mda_gid = GID_OPERATOR; args.mda_mode = 0600; args.mda_si_drv1 = periph; error = make_dev_s(&args, &softc->dev, "%s%d", periph->periph_name, periph->unit_number); if (error != 0) { cam_periph_lock(periph); cam_periph_release_locked(periph); return (CAM_REQ_CMP_ERR); } if (periph->unit_number < 26) { (void)make_dev_alias(softc->dev, "sg%c", periph->unit_number + 'a'); } else { (void)make_dev_alias(softc->dev, "sg%c%c", ((periph->unit_number / 26) - 1) + 'a', (periph->unit_number % 26) + 'a'); } cam_periph_lock(periph); /* * Add as async callback so that we get * notified if this device goes away. */ xpt_register_async(AC_LOST_DEVICE, sgasync, periph, periph->path); if (bootverbose) xpt_announce_periph(periph, NULL); return (CAM_REQ_CMP); } static void sgdone(struct cam_periph *periph, union ccb *done_ccb) { struct sg_softc *softc; struct ccb_scsiio *csio; softc = (struct sg_softc *)periph->softc; csio = &done_ccb->csio; switch (csio->ccb_h.ccb_type) { case SG_CCB_RDWR_IO: { struct sg_rdwr *rdwr; int state; devstat_end_transaction(softc->device_stats, csio->dxfer_len, csio->tag_action & 0xf, ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) ? DEVSTAT_NO_DATA : (csio->ccb_h.flags & CAM_DIR_OUT) ? DEVSTAT_WRITE : DEVSTAT_READ, NULL, NULL); rdwr = done_ccb->ccb_h.ccb_rdwr; state = rdwr->state; rdwr->state = SG_RDWR_DONE; wakeup(rdwr); break; } default: panic("unknown sg CCB type"); } } static int sgopen(struct cdev *dev, int flags, int fmt, struct thread *td) { struct cam_periph *periph; struct sg_softc *softc; int error = 0; periph = (struct cam_periph *)dev->si_drv1; if (cam_periph_acquire(periph) != 0) return (ENXIO); /* * Don't allow access when we're running at a high securelevel. */ error = securelevel_gt(td->td_ucred, 1); if (error) { cam_periph_release(periph); return (error); } cam_periph_lock(periph); softc = (struct sg_softc *)periph->softc; if (softc->flags & SG_FLAG_INVALID) { cam_periph_release_locked(periph); cam_periph_unlock(periph); return (ENXIO); } softc->open_count++; cam_periph_unlock(periph); return (error); } static int sgclose(struct cdev *dev, int flag, int fmt, struct thread *td) { struct cam_periph *periph; struct sg_softc *softc; struct mtx *mtx; periph = (struct cam_periph *)dev->si_drv1; mtx = cam_periph_mtx(periph); mtx_lock(mtx); softc = periph->softc; softc->open_count--; cam_periph_release_locked(periph); /* * We reference the lock directly here, instead of using * cam_periph_unlock(). The reason is that the call to * cam_periph_release_locked() above could result in the periph * getting freed. If that is the case, dereferencing the periph * with a cam_periph_unlock() call would cause a page fault. * * cam_periph_release() avoids this problem using the same method, * but we're manually acquiring and dropping the lock here to * protect the open count and avoid another lock acquisition and * release. */ mtx_unlock(mtx); return (0); } static int sgioctl(struct cdev *dev, u_long cmd, caddr_t arg, int flag, struct thread *td) { union ccb *ccb; struct ccb_scsiio *csio; struct cam_periph *periph; struct sg_softc *softc; struct sg_io_hdr *req; int dir, error; periph = (struct cam_periph *)dev->si_drv1; cam_periph_lock(periph); softc = (struct sg_softc *)periph->softc; error = 0; switch (cmd) { case SG_GET_VERSION_NUM: { int *version = (int *)arg; *version = sg_version; break; } case SG_SET_TIMEOUT: { u_int user_timeout = *(u_int *)arg; softc->sg_user_timeout = user_timeout; softc->sg_timeout = user_timeout / SG_DEFAULT_HZ * hz; break; } case SG_GET_TIMEOUT: /* * The value is returned directly to the syscall. */ td->td_retval[0] = softc->sg_user_timeout; error = 0; break; case SG_IO: req = (struct sg_io_hdr *)arg; if (req->cmd_len > IOCDBLEN) { error = EINVAL; break; } if (req->iovec_count != 0) { error = EOPNOTSUPP; break; } ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); csio = &ccb->csio; error = copyin(req->cmdp, &csio->cdb_io.cdb_bytes, req->cmd_len); if (error) { xpt_release_ccb(ccb); break; } switch(req->dxfer_direction) { case SG_DXFER_TO_DEV: dir = CAM_DIR_OUT; break; case SG_DXFER_FROM_DEV: dir = CAM_DIR_IN; break; case SG_DXFER_TO_FROM_DEV: dir = CAM_DIR_BOTH; break; case SG_DXFER_NONE: default: dir = CAM_DIR_NONE; break; } cam_fill_csio(csio, /*retries*/1, /*cbfcnp*/NULL, dir|CAM_DEV_QFRZDIS, MSG_SIMPLE_Q_TAG, req->dxferp, req->dxfer_len, req->mx_sb_len, req->cmd_len, req->timeout); error = sgsendccb(periph, ccb); if (error) { req->host_status = DID_ERROR; req->driver_status = DRIVER_INVALID; xpt_release_ccb(ccb); break; } req->status = csio->scsi_status; req->masked_status = (csio->scsi_status >> 1) & 0x7f; sg_scsiio_status(csio, &req->host_status, &req->driver_status); req->resid = csio->resid; req->duration = csio->ccb_h.timeout; req->info = 0; if ((csio->ccb_h.status & CAM_AUTOSNS_VALID) && (req->sbp != NULL)) { req->sb_len_wr = req->mx_sb_len - csio->sense_resid; error = copyout(&csio->sense_data, req->sbp, req->sb_len_wr); } xpt_release_ccb(ccb); break; case SG_GET_RESERVED_SIZE: { int *size = (int *)arg; *size = DFLTPHYS; break; } case SG_GET_SCSI_ID: { struct sg_scsi_id *id = (struct sg_scsi_id *)arg; id->host_no = cam_sim_path(xpt_path_sim(periph->path)); id->channel = xpt_path_path_id(periph->path); id->scsi_id = xpt_path_target_id(periph->path); id->lun = xpt_path_lun_id(periph->path); id->scsi_type = softc->pd_type; id->h_cmd_per_lun = 1; id->d_queue_depth = 1; id->unused[0] = 0; id->unused[1] = 0; break; } case SG_GET_SG_TABLESIZE: { int *size = (int *)arg; *size = 0; break; } case SG_EMULATED_HOST: case SG_SET_TRANSFORM: case SG_GET_TRANSFORM: case SG_GET_NUM_WAITING: case SG_SCSI_RESET: case SG_GET_REQUEST_TABLE: case SG_SET_KEEP_ORPHAN: case SG_GET_KEEP_ORPHAN: case SG_GET_ACCESS_COUNT: case SG_SET_FORCE_LOW_DMA: case SG_GET_LOW_DMA: case SG_SET_FORCE_PACK_ID: case SG_GET_PACK_ID: case SG_SET_RESERVED_SIZE: case SG_GET_COMMAND_Q: case SG_SET_COMMAND_Q: case SG_SET_DEBUG: case SG_NEXT_CMD_LEN: default: #ifdef CAMDEBUG printf("sgioctl: rejecting cmd 0x%lx\n", cmd); #endif error = ENODEV; break; } cam_periph_unlock(periph); return (error); } static int sgwrite(struct cdev *dev, struct uio *uio, int ioflag) { union ccb *ccb; struct cam_periph *periph; struct ccb_scsiio *csio; struct sg_softc *sc; struct sg_header *hdr; struct sg_rdwr *rdwr; u_char cdb_cmd; char *buf; int error = 0, cdb_len, buf_len, dir; periph = dev->si_drv1; rdwr = malloc(sizeof(*rdwr), M_DEVBUF, M_WAITOK | M_ZERO); hdr = &rdwr->hdr.hdr; /* Copy in the header block and sanity check it */ if (uio->uio_resid < sizeof(*hdr)) { error = EINVAL; goto out_hdr; } error = uiomove(hdr, sizeof(*hdr), uio); if (error) goto out_hdr; /* XXX: We don't support SG 3.x read/write API. */ if (hdr->reply_len < 0) { error = ENODEV; goto out_hdr; } ccb = xpt_alloc_ccb(); if (ccb == NULL) { error = ENOMEM; goto out_hdr; } csio = &ccb->csio; /* * Copy in the CDB block. The designers of the interface didn't * bother to provide a size for this in the header, so we have to * figure it out ourselves. */ if (uio->uio_resid < 1) goto out_ccb; error = uiomove(&cdb_cmd, 1, uio); if (error) goto out_ccb; if (hdr->twelve_byte) cdb_len = 12; else cdb_len = scsi_group_len(cdb_cmd); /* * We've already read the first byte of the CDB and advanced the uio * pointer. Just read the rest. */ csio->cdb_io.cdb_bytes[0] = cdb_cmd; error = uiomove(&csio->cdb_io.cdb_bytes[1], cdb_len - 1, uio); if (error) goto out_ccb; /* * Now set up the data block. Again, the designers didn't bother * to make this reliable. */ buf_len = uio->uio_resid; if (buf_len != 0) { buf = malloc(buf_len, M_DEVBUF, M_WAITOK | M_ZERO); error = uiomove(buf, buf_len, uio); if (error) goto out_buf; dir = CAM_DIR_OUT; } else if (hdr->reply_len != 0) { buf = malloc(hdr->reply_len, M_DEVBUF, M_WAITOK | M_ZERO); buf_len = hdr->reply_len; dir = CAM_DIR_IN; } else { buf = NULL; buf_len = 0; dir = CAM_DIR_NONE; } cam_periph_lock(periph); sc = periph->softc; xpt_setup_ccb(&ccb->ccb_h, periph->path, CAM_PRIORITY_NORMAL); cam_fill_csio(csio, /*retries*/1, sgdone, dir|CAM_DEV_QFRZDIS, MSG_SIMPLE_Q_TAG, buf, buf_len, SG_MAX_SENSE, cdb_len, sc->sg_timeout); /* * Send off the command and hope that it works. This path does not * go through sgstart because the I/O is supposed to be asynchronous. */ rdwr->buf = buf; rdwr->buf_len = buf_len; rdwr->tag = hdr->pack_id; rdwr->ccb = ccb; rdwr->state = SG_RDWR_INPROG; ccb->ccb_h.ccb_rdwr = rdwr; ccb->ccb_h.ccb_type = SG_CCB_RDWR_IO; TAILQ_INSERT_TAIL(&sc->rdwr_done, rdwr, rdwr_link); error = sgsendrdwr(periph, ccb); cam_periph_unlock(periph); return (error); out_buf: free(buf, M_DEVBUF); out_ccb: xpt_free_ccb(ccb); out_hdr: free(rdwr, M_DEVBUF); return (error); } static int sgread(struct cdev *dev, struct uio *uio, int ioflag) { struct ccb_scsiio *csio; struct cam_periph *periph; struct sg_softc *sc; struct sg_header *hdr; struct sg_rdwr *rdwr; u_short hstat, dstat; int error, pack_len, reply_len, pack_id; periph = dev->si_drv1; /* XXX The pack len field needs to be updated and written out instead * of discarded. Not sure how to do that. */ uio->uio_rw = UIO_WRITE; if ((error = uiomove(&pack_len, 4, uio)) != 0) return (error); if ((error = uiomove(&reply_len, 4, uio)) != 0) return (error); if ((error = uiomove(&pack_id, 4, uio)) != 0) return (error); uio->uio_rw = UIO_READ; cam_periph_lock(periph); sc = periph->softc; search: TAILQ_FOREACH(rdwr, &sc->rdwr_done, rdwr_link) { if (rdwr->tag == pack_id) break; } if ((rdwr == NULL) || (rdwr->state != SG_RDWR_DONE)) { if (cam_periph_sleep(periph, rdwr, PCATCH, "sgread", 0) == ERESTART) return (EAGAIN); goto search; } TAILQ_REMOVE(&sc->rdwr_done, rdwr, rdwr_link); cam_periph_unlock(periph); hdr = &rdwr->hdr.hdr; csio = &rdwr->ccb->csio; sg_scsiio_status(csio, &hstat, &dstat); hdr->host_status = hstat; hdr->driver_status = dstat; hdr->target_status = csio->scsi_status >> 1; switch (hstat) { case DID_OK: case DID_PASSTHROUGH: case DID_SOFT_ERROR: hdr->result = 0; break; case DID_NO_CONNECT: case DID_BUS_BUSY: case DID_TIME_OUT: hdr->result = EBUSY; break; case DID_BAD_TARGET: case DID_ABORT: case DID_PARITY: case DID_RESET: case DID_BAD_INTR: case DID_ERROR: default: hdr->result = EIO; break; } if (dstat == DRIVER_SENSE) { bcopy(&csio->sense_data, hdr->sense_buffer, min(csio->sense_len, SG_MAX_SENSE)); #ifdef CAMDEBUG scsi_sense_print(csio); #endif } error = uiomove(&hdr->result, sizeof(*hdr) - offsetof(struct sg_header, result), uio); if ((error == 0) && (hdr->result == 0)) error = uiomove(rdwr->buf, rdwr->buf_len, uio); cam_periph_lock(periph); xpt_free_ccb(rdwr->ccb); cam_periph_unlock(periph); free(rdwr->buf, M_DEVBUF); free(rdwr, M_DEVBUF); return (error); } static int sgsendccb(struct cam_periph *periph, union ccb *ccb) { struct sg_softc *softc; struct cam_periph_map_info mapinfo; int error; softc = periph->softc; bzero(&mapinfo, sizeof(mapinfo)); /* * cam_periph_mapmem calls into proc and vm functions that can * sleep as well as trigger I/O, so we can't hold the lock. * Dropping it here is reasonably safe. * The only CCB opcode that is possible here is XPT_SCSI_IO, no * need for additional checks. */ cam_periph_unlock(periph); error = cam_periph_mapmem(ccb, &mapinfo, softc->maxio); cam_periph_lock(periph); if (error) return (error); error = cam_periph_runccb(ccb, sgerror, CAM_RETRY_SELTO, SF_RETRY_UA, softc->device_stats); cam_periph_unlock(periph); cam_periph_unmapmem(ccb, &mapinfo); cam_periph_lock(periph); return (error); } static int sgsendrdwr(struct cam_periph *periph, union ccb *ccb) { struct sg_softc *softc; softc = periph->softc; devstat_start_transaction(softc->device_stats, NULL); xpt_action(ccb); return (0); } static int sgerror(union ccb *ccb, uint32_t cam_flags, uint32_t sense_flags) { struct cam_periph *periph; struct sg_softc *softc; periph = xpt_path_periph(ccb->ccb_h.path); softc = (struct sg_softc *)periph->softc; return (cam_periph_error(ccb, cam_flags, sense_flags)); } static void sg_scsiio_status(struct ccb_scsiio *csio, u_short *hoststat, u_short *drvstat) { int status; status = csio->ccb_h.status; switch (status & CAM_STATUS_MASK) { case CAM_REQ_CMP: *hoststat = DID_OK; *drvstat = 0; break; case CAM_REQ_CMP_ERR: *hoststat = DID_ERROR; *drvstat = 0; break; case CAM_REQ_ABORTED: *hoststat = DID_ABORT; *drvstat = 0; break; case CAM_REQ_INVALID: *hoststat = DID_ERROR; *drvstat = DRIVER_INVALID; break; case CAM_DEV_NOT_THERE: *hoststat = DID_BAD_TARGET; *drvstat = 0; break; case CAM_SEL_TIMEOUT: *hoststat = DID_NO_CONNECT; *drvstat = 0; break; case CAM_CMD_TIMEOUT: *hoststat = DID_TIME_OUT; *drvstat = 0; break; case CAM_SCSI_STATUS_ERROR: *hoststat = DID_ERROR; *drvstat = 0; break; case CAM_SCSI_BUS_RESET: *hoststat = DID_RESET; *drvstat = 0; break; case CAM_UNCOR_PARITY: *hoststat = DID_PARITY; *drvstat = 0; break; case CAM_SCSI_BUSY: *hoststat = DID_BUS_BUSY; *drvstat = 0; break; default: *hoststat = DID_ERROR; *drvstat = DRIVER_ERROR; } if (status & CAM_AUTOSNS_VALID) *drvstat = DRIVER_SENSE; } static int scsi_group_len(u_char cmd) { int len[] = {6, 10, 10, 12, 12, 12, 10, 10}; int group; group = (cmd >> 5) & 0x7; return (len[group]); }