/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2018 Emmanuel Vadot * Copyright (c) 2019 Brandon Bergren * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "pwmbus_if.h" /* Register offsets. */ #define RK_PWM_COUNTER 0x00 #define RK_PWM_PERIOD 0x04 #define RK_PWM_DUTY 0x08 #define RK_PWM_CTRL 0x0c #define SET(reg,mask,val) reg = ((reg & ~mask) | val) #define RK_PWM_CTRL_ENABLE_MASK (1 << 0) #define RK_PWM_CTRL_ENABLED (1 << 0) #define RK_PWM_CTRL_DISABLED (0) #define RK_PWM_CTRL_MODE_MASK (3 << 1) #define RK_PWM_CTRL_MODE_ONESHOT (0) #define RK_PWM_CTRL_MODE_CONTINUOUS (1 << 1) #define RK_PWM_CTRL_MODE_CAPTURE (1 << 2) #define RK_PWM_CTRL_DUTY_MASK (1 << 3) #define RK_PWM_CTRL_DUTY_POSITIVE (1 << 3) #define RK_PWM_CTRL_DUTY_NEGATIVE (0) #define RK_PWM_CTRL_INACTIVE_MASK (1 << 4) #define RK_PWM_CTRL_INACTIVE_POSITIVE (1 << 4) #define RK_PWM_CTRL_INACTIVE_NEGATIVE (0) /* PWM Output Alignment */ #define RK_PWM_CTRL_ALIGN_MASK (1 << 5) #define RK_PWM_CTRL_ALIGN_CENTER (1 << 5) #define RK_PWM_CTRL_ALIGN_LEFT (0) /* Low power mode: disable prescaler when inactive */ #define RK_PWM_CTRL_LP_MASK (1 << 8) #define RK_PWM_CTRL_LP_ENABLE (1 << 8) #define RK_PWM_CTRL_LP_DISABLE (0) /* Clock source: bypass the scaler or not */ #define RK_PWM_CTRL_CLOCKSRC_MASK (1 << 9) #define RK_PWM_CTRL_CLOCKSRC_NONSCALED (0) #define RK_PWM_CTRL_CLOCKSRC_SCALED (1 << 9) #define RK_PWM_CTRL_PRESCALE_MASK (7 << 12) #define RK_PWM_CTRL_PRESCALE_SHIFT 12 #define RK_PWM_CTRL_SCALE_MASK (0xFF << 16) #define RK_PWM_CTRL_SCALE_SHIFT 16 #define RK_PWM_CTRL_REPEAT_MASK (0xFF << 24) #define RK_PWM_CTRL_REPEAT_SHIFT 24 #define NS_PER_SEC 1000000000 static struct ofw_compat_data compat_data[] = { { "rockchip,rk3288-pwm", 1 }, { "rockchip,rk3399-pwm", 1 }, { NULL, 0 } }; static struct resource_spec rk_pwm_spec[] = { { SYS_RES_MEMORY, 0, RF_ACTIVE }, { -1, 0 } }; struct rk_pwm_softc { device_t dev; device_t busdev; clk_t clk; struct resource *res; uint64_t clk_freq; unsigned int period; unsigned int duty; uint32_t flags; uint8_t prescaler; uint8_t scaler; bool using_scaler; bool enabled; }; #define RK_PWM_READ(sc, reg) bus_read_4((sc)->res, (reg)) #define RK_PWM_WRITE(sc, reg, val) bus_write_4((sc)->res, (reg), (val)) static int rk_pwm_probe(device_t dev); static int rk_pwm_attach(device_t dev); static int rk_pwm_detach(device_t dev); static int rk_pwm_probe(device_t dev) { if (!ofw_bus_status_okay(dev)) return (ENXIO); if (!ofw_bus_search_compatible(dev, compat_data)->ocd_data) return (ENXIO); device_set_desc(dev, "Rockchip PWM"); return (BUS_PROBE_DEFAULT); } static int rk_pwm_attach(device_t dev) { struct rk_pwm_softc *sc; phandle_t node; uint64_t clk_freq; uint32_t reg; int error; sc = device_get_softc(dev); sc->dev = dev; error = clk_get_by_ofw_index(dev, 0, 0, &sc->clk); if (error != 0) { device_printf(dev, "cannot get clock\n"); goto fail; } error = clk_enable(sc->clk); if (error != 0) { device_printf(dev, "cannot enable clock\n"); goto fail; } error = clk_get_freq(sc->clk, &sc->clk_freq); if (error != 0) { device_printf(dev, "cannot get base frequency\n"); goto fail; } if (bus_alloc_resources(dev, rk_pwm_spec, &sc->res) != 0) { device_printf(dev, "cannot allocate resources for device\n"); error = ENXIO; goto fail; } /* Read the configuration left by U-Boot */ reg = RK_PWM_READ(sc, RK_PWM_CTRL); if ((reg & RK_PWM_CTRL_ENABLE_MASK) == RK_PWM_CTRL_ENABLED) sc->enabled = true; reg = RK_PWM_READ(sc, RK_PWM_CTRL); reg &= RK_PWM_CTRL_PRESCALE_MASK; sc->prescaler = reg >> RK_PWM_CTRL_PRESCALE_SHIFT; reg = RK_PWM_READ(sc, RK_PWM_CTRL); reg &= RK_PWM_CTRL_SCALE_MASK; sc->scaler = reg >> RK_PWM_CTRL_SCALE_SHIFT; reg = RK_PWM_READ(sc, RK_PWM_CTRL); if ((reg & RK_PWM_CTRL_CLOCKSRC_MASK) == RK_PWM_CTRL_CLOCKSRC_SCALED) sc->using_scaler = true; else sc->using_scaler = false; clk_freq = sc->clk_freq / (2 ^ sc->prescaler); if (sc->using_scaler) { if (sc->scaler == 0) clk_freq /= 512; else clk_freq /= (sc->scaler * 2); } reg = RK_PWM_READ(sc, RK_PWM_PERIOD); sc->period = NS_PER_SEC / (clk_freq / reg); reg = RK_PWM_READ(sc, RK_PWM_DUTY); sc->duty = NS_PER_SEC / (clk_freq / reg); node = ofw_bus_get_node(dev); OF_device_register_xref(OF_xref_from_node(node), dev); sc->busdev = device_add_child(dev, "pwmbus", -1); return (bus_generic_attach(dev)); fail: rk_pwm_detach(dev); return (error); } static int rk_pwm_detach(device_t dev) { struct rk_pwm_softc *sc; sc = device_get_softc(dev); bus_generic_detach(sc->dev); bus_release_resources(dev, rk_pwm_spec, &sc->res); return (0); } static phandle_t aw_pwm_get_node(device_t bus, device_t dev) { /* * Share our controller node with our pwmbus child; it instantiates * devices by walking the children contained within our node. */ return ofw_bus_get_node(bus); } static int rk_pwm_channel_count(device_t dev, u_int *nchannel) { /* The device supports 4 channels, but attaches multiple times in the * device tree. This interferes with advanced usage though, as * the interrupt capability and channel 3 FIFO register offsets * don't work right in this situation. * But since we don't support those yet, pretend we are singlechannel. */ *nchannel = 1; return (0); } static int rk_pwm_channel_config(device_t dev, u_int channel, u_int period, u_int duty) { struct rk_pwm_softc *sc; uint64_t period_freq, duty_freq; uint32_t reg; uint32_t period_out; uint32_t duty_out; uint8_t prescaler; uint8_t scaler; bool using_scaler; sc = device_get_softc(dev); period_freq = NS_PER_SEC / period; /* Datasheet doesn't define, so use Nyquist frequency. */ if (period_freq > (sc->clk_freq / 2)) return (EINVAL); duty_freq = NS_PER_SEC / duty; if (duty_freq < period_freq) { device_printf(sc->dev, "duty < period\n"); return (EINVAL); } /* Assuming 24 MHz reference, we should never actually have to use the divider due to pwm API limitations. */ prescaler = 0; scaler = 0; using_scaler = false; /* XXX Expand API to allow for 64 bit period/duty. */ period_out = (sc->clk_freq * period) / NS_PER_SEC; duty_out = (sc->clk_freq * duty) / NS_PER_SEC; reg = RK_PWM_READ(sc, RK_PWM_CTRL); if ((reg & RK_PWM_CTRL_MODE_MASK) != RK_PWM_CTRL_MODE_CONTINUOUS) { /* Switching modes, disable just in case. */ SET(reg, RK_PWM_CTRL_ENABLE_MASK, RK_PWM_CTRL_DISABLED); RK_PWM_WRITE(sc, RK_PWM_CTRL, reg); } RK_PWM_WRITE(sc, RK_PWM_PERIOD, period_out); RK_PWM_WRITE(sc, RK_PWM_DUTY, duty_out); SET(reg, RK_PWM_CTRL_ENABLE_MASK, RK_PWM_CTRL_ENABLED); SET(reg, RK_PWM_CTRL_MODE_MASK, RK_PWM_CTRL_MODE_CONTINUOUS); SET(reg, RK_PWM_CTRL_ALIGN_MASK, RK_PWM_CTRL_ALIGN_LEFT); SET(reg, RK_PWM_CTRL_CLOCKSRC_MASK, using_scaler); SET(reg, RK_PWM_CTRL_PRESCALE_MASK, prescaler << RK_PWM_CTRL_PRESCALE_SHIFT); SET(reg, RK_PWM_CTRL_SCALE_MASK, scaler << RK_PWM_CTRL_SCALE_SHIFT); RK_PWM_WRITE(sc, RK_PWM_CTRL, reg); sc->period = period; sc->duty = duty; return (0); } static int rk_pwm_channel_get_config(device_t dev, u_int channel, u_int *period, u_int *duty) { struct rk_pwm_softc *sc; sc = device_get_softc(dev); *period = sc->period; *duty = sc->duty; return (0); } static int rk_pwm_channel_enable(device_t dev, u_int channel, bool enable) { struct rk_pwm_softc *sc; uint32_t reg; sc = device_get_softc(dev); if (enable && sc->enabled) return (0); reg = RK_PWM_READ(sc, RK_PWM_CTRL); SET(reg, RK_PWM_CTRL_ENABLE_MASK, enable); RK_PWM_WRITE(sc, RK_PWM_CTRL, reg); sc->enabled = enable; return (0); } static int rk_pwm_channel_is_enabled(device_t dev, u_int channel, bool *enabled) { struct rk_pwm_softc *sc; sc = device_get_softc(dev); *enabled = sc->enabled; return (0); } static device_method_t rk_pwm_methods[] = { /* Device interface */ DEVMETHOD(device_probe, rk_pwm_probe), DEVMETHOD(device_attach, rk_pwm_attach), DEVMETHOD(device_detach, rk_pwm_detach), /* ofw_bus interface */ DEVMETHOD(ofw_bus_get_node, aw_pwm_get_node), /* pwm interface */ DEVMETHOD(pwmbus_channel_count, rk_pwm_channel_count), DEVMETHOD(pwmbus_channel_config, rk_pwm_channel_config), DEVMETHOD(pwmbus_channel_get_config, rk_pwm_channel_get_config), DEVMETHOD(pwmbus_channel_enable, rk_pwm_channel_enable), DEVMETHOD(pwmbus_channel_is_enabled, rk_pwm_channel_is_enabled), DEVMETHOD_END }; static driver_t rk_pwm_driver = { "pwm", rk_pwm_methods, sizeof(struct rk_pwm_softc), }; static devclass_t rk_pwm_devclass; DRIVER_MODULE(rk_pwm, simplebus, rk_pwm_driver, rk_pwm_devclass, 0, 0); SIMPLEBUS_PNP_INFO(compat_data);