.\" Copyright (c) 1996 .\" Julian Elischer . All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .Dd June 18, 2020 .Dt CAM 4 .Os .Sh NAME .Nm CAM .Nd Common Access Method Storage subsystem .Sh SYNOPSIS .Cd "device scbus" .Cd "device ada" .Cd "device cd" .Cd "device ch" .Cd "device da" .Cd "device pass" .Cd "device pt" .Cd "device sa" .Cd "options CAMDEBUG" .Cd "options CAM_DEBUG_BUS=-1" .Cd "options CAM_DEBUG_TARGET=-1" .Cd "options CAM_DEBUG_LUN=-1" .Cd "options CAM_DEBUG_COMPILE=CAM_DEBUG_INFO|CAM_DEBUG_CDB|CAM_DEBUG_PROBE" .Cd "options CAM_DEBUG_FLAGS=CAM_DEBUG_INFO|CAM_DEBUG_CDB" .Cd "options CAM_MAX_HIGHPOWER=4" .Cd "options SCSI_NO_SENSE_STRINGS" .Cd "options SCSI_NO_OP_STRINGS" .Cd "options SCSI_DELAY=8000" .Sh DESCRIPTION The .Nm subsystem provides a uniform and modular system for the implementation of drivers to control various .Tn SCSI , .Tn ATA , .Tn NVMe , and .Tn MMC / SD devices, and to utilize different .Tn SCSI , .Tn ATA , .Tn NVMe , and .Tn MMC / SD host adapters through host adapter drivers. When the system probes buses, it attaches any devices it finds to the appropriate drivers. The .Xr pass 4 driver, if it is configured in the kernel, will attach to all devices. .Sh KERNEL CONFIGURATION There are a number of generic kernel configuration options for the .Nm subsystem: .Bl -tag -width SCSI_NO_SENSE_STRINGS .It Dv CAM_BOOT_DELAY Additional time to wait after the static parts of the kernel have run to allow for discovery of additional devices which may take time to connect, such as USB attached storage. .It Dv CAM_IOSCHED_DYNAMIC Enable dynamic decisions in the I/O scheduler based on hints and the current performance of the storage devices. .It Dv CAM_IO_STATS Enable collection of statistics for periph devices. .It Dv CAM_TEST_FAILURE Enable ability to simulate I/O failures. .It Dv CAMDEBUG This option compiles in all the .Nm debugging printf code. This will not actually cause any debugging information to be printed out when included by itself. See below for details. .It Dv "CAM_MAX_HIGHPOWER=4" This sets the maximum allowable number of concurrent "high power" commands. A "high power" command is a command that takes more electrical power than most to complete. An example of this is the .Tn SCSI START UNIT command. Starting a disk often takes significantly more electrical power than normal operation. This option allows the user to specify how many concurrent high power commands may be outstanding without overloading the power supply on his computer. .It Dv SCSI_NO_SENSE_STRINGS This eliminates text descriptions of each .Tn SCSI Additional Sense Code and Additional Sense Code Qualifier pair. Since this is a fairly large text database, eliminating it reduces the size of the kernel somewhat. This is primarily necessary for boot floppies and other low disk space or low memory space environments. In most cases, though, this should be enabled, since it speeds the interpretation of .Tn SCSI error messages. Do not let the "kernel bloat" zealots get to you -- leave the sense descriptions in your kernel! .It Dv SCSI_NO_OP_STRINGS This disables text descriptions of each .Tn SCSI opcode. This option, like the sense string option above, is primarily useful for environments like a boot floppy where kernel size is critical. Enabling this option for normal use is not recommended, since it slows debugging of .Tn SCSI problems. .It Dv SCSI_DELAY=8000 This is the .Tn SCSI "bus settle delay." In .Nm , it is specified in .Em milliseconds , not seconds like the old .Tn SCSI layer used to do. When the kernel boots, it sends a bus reset to each .Tn SCSI bus to tell each device to reset itself to a default set of transfer negotiations and other settings. Most .Tn SCSI devices need some amount of time to recover from a bus reset. Newer disks may need as little as 100ms, while old, slow devices may need much longer. If the .Dv SCSI_DELAY is not specified, it defaults to 2 seconds. The minimum allowable value for .Dv SCSI_DELAY is "100", or 100ms. One special case is that if the .Dv SCSI_DELAY is set to 0, that will be taken to mean the "lowest possible value." In that case, the .Dv SCSI_DELAY will be reset to 100ms. .El .Pp All devices and buses support dynamic allocation so that an upper number of devices and controllers does not need to be configured; .Cd "device da" will suffice for any number of disk drivers. .Pp The devices are either .Em wired so they appear as a particular device unit or .Em counted so that they appear as the next available unused unit. .Pp Units are wired down by setting kernel environment hints. This is usually done either interactively from the .Xr loader 8 , or automatically via the .Pa /boot/device.hints file. The basic syntax is: .Bd -literal -offset indent hint.device.unit.property="value" .Ed .Pp Individual .Nm bus numbers can be wired down to specific controllers with a config line similar to the following: .Bd -literal -offset indent hint.scbus.0.at="ahd1" .Ed .Pp This assigns .Nm bus number 0 to the .Em ahd1 driver instance. For controllers supporting more than one bus, a particular bus can be assigned as follows: .Bd -literal -offset indent hint.scbus.0.at="ahc1" hint.scbus.0.bus="1" .Ed .Pp This assigns .Nm bus 0 to the bus 1 instance on .Em ahc1 . Peripheral drivers can be wired to a specific bus, target, and lun as so: .Bd -literal -offset indent hint.da.0.at="scbus0" hint.da.0.target="0" hint.da.0.unit="0" .Ed .Pp This assigns .Em da0 to target 0, unit (lun) 0 of scbus 0. Omitting the target or unit hints will instruct .Nm to treat them as wildcards and use the first respective counted instances. These examples can be combined together to allow a peripheral device to be wired to any particular controller, bus, target, and/or unit instance. .Pp This also works with .Xr nvme 4 drives as well. .Bd -literal -offset indent hint.nvme.4.at="pci7:0:0" hint.scbus.10.at="nvme4" hint.nda.10.at="scbus10" hint.nda.10.target="1" hint.nda.10.unit="12" hint.nda.11.at="scbus10" hint.nda.11.target="1" hint.nda.11.unit="2" .Ed .Pp This assigns the NVMe card living at PCI bus 7 to scbus 10 (in PCIe, slot and function are rarely used and usually 0). The target for .Xr nda 4 devices is always 1. The unit is the namespace identifier from the drive. The namespace id 1 is exported as .Tn nda10 and namespace id 2 is exported as .Tn nda11 . .Pp When you have a mixture of wired down and counted devices then the counting begins with the first non-wired down unit for a particular type. That is, if you have a disk wired down as .Em "device da1" , then the first non-wired disk shall come on line as .Em da2 . .Sh ADAPTERS The system allows common device drivers to work through many different types of adapters. The adapters take requests from the upper layers and do all IO between the .Tn SCSI , .Tn ATA , .Tn NVMe , or .Tn MMC / SD bus and the system. The maximum size of a transfer is governed by the adapter. Most adapters can transfer 64KB in a single operation, however many can transfer larger amounts. .Sh TARGET MODE Some adapters support .Em target mode in which the system is capable of operating as a device, responding to operations initiated by another system. Target mode is supported for some adapters, but is not yet complete for this version of the .Nm .Tn SCSI subsystem. .Sh ARCHITECTURE The .Nm subsystem glues together the upper layers of the system to the storage devices. PERIPH devices accept storage requests from GEOM and other upper layers of the system and translates them into protocol requests. XPT (transport) dispatches these protocol requests to a SIM driver. A SIM driver takes protocol requests and translates them into hardware commands the host adapter understands to transfer the protocol requests, and data (if any) to the storage device. The CCB transports these requests around as messages. .Ss CAM The Common Access Method was a standard defined in the 1990s to talk to disk drives. .Fx is one of the few operating systems to fully implement this model. The interface between different parts of CAM is the CCB (or CAM Control Block). Each CCB has a standard header, which contains the type of request and dispatch information, and a command specific portion. A CAM Periph generates requests. The XPT layer dispatches these requests to the appropriate SIM. Some CCBs are sent directly to the SIM for immediate processing, while others are queued and complete when the I/O has finished. A SIM takes CCBs and translates them into hardware specific commands to push the SCSI CDB or other protocol control block to the peripheral, along with setting up the DMA for the associated data. .Ss Periph Devices A periph driver knows how to translate standard requests into protocol messages that a SIM can deliver to hardware. These requests can come from any upper layer source, but primarily come in via GEOM as a bio request. They can also come in directly from character device requests for tapes and pass through commands. .Pp Disk devices, or direct access (da) in CAM, are one type of peripheral. These devices present themselves to the kernel a device ending in .Dq da . Each protocol has a unique device name: .Bl -tag -width 4 .It Xr da 4 SCSI or SAS device, or devices that accept SCSI CDBs for I/O. .It Xr ada 4 ATA or SATA device .It Xr nda 4 NVME device .It Xr sdda 4 An SD or MMC block storage device. .El .Pp Tape devices are called serial access .Po .Xr sa 4 .Pc in CAM. They interface to the system via a character device and provide .Xr ioctl 2 control for tape drives. .Pp The .Xr pass 4 device will pass through CCB requests from userland to the SIM directly. The device is used to send commands other than read, write, trim or flush to a device. The .Xr camcontrol 8 command uses this device. .Ss XPT drivers The transport driver connects the periph to the SIM. It is not configured separately. It is also responsible for device discovery for those SIM drivers that do not enumerate themselves. .Ss SIM driver SIM used to stand for SCSI Interface Module. Now it is just SIM because it understands protocols other than SCSI. There are two types of SIM drivers: virtual and physical. Physical SIMs are typically called host bus adapters (HBA), but not universally. Virtual SIM drivers are for communicating with virtual machine hosts. .Sh FILES see other .Nm device entries. .Sh DIAGNOSTICS An XPT_DEBUG CCB can be used to enable various amounts of tracing information on any specific bus/device from the list of options compiled into the kernel. There are currently seven debugging flags that may be compiled in and used: .Bl -tag -width CAM_DEBUG_SUBTRACE .It Dv CAM_DEBUG_INFO This flag enables general informational printfs for the device or devices in question. .It Dv CAM_DEBUG_TRACE This flag enables function-level command flow tracing i.e., kernel printfs will happen at the entrance and exit of various functions. .It Dv CAM_DEBUG_SUBTRACE This flag enables debugging output internal to various functions. .It Dv CAM_DEBUG_CDB This flag will cause the kernel to print out all .Tn ATA and .Tn SCSI commands sent to a particular device or devices. .It Dv CAM_DEBUG_XPT This flag will enable command scheduler tracing. .It Dv CAM_DEBUG_PERIPH This flag will enable peripheral drivers messages. .It Dv CAM_DEBUG_PROBE This flag will enable devices probe process tracing. .El .Pp Some of these flags, most notably .Dv CAM_DEBUG_TRACE and .Dv CAM_DEBUG_SUBTRACE , will produce kernel printfs in EXTREME numbers. .Pp Users can enable debugging from their kernel config file, by using the following kernel config options: .Bl -tag -width CAM_DEBUG_COMPILE .It Dv CAMDEBUG This builds into the kernel all possible .Nm debugging. .It Dv CAM_DEBUG_COMPILE This specifies support for which debugging flags described above should be built into the kernel. Flags may be ORed together if the user wishes to see printfs for multiple debugging levels. .It Dv CAM_DEBUG_FLAGS This sets the various debugging flags from a kernel config file. .It Dv CAM_DEBUG_BUS Specify a bus to debug. To debug all buses, set this to -1. .It Dv CAM_DEBUG_TARGET Specify a target to debug. To debug all targets, set this to -1. .It Dv CAM_DEBUG_LUN Specify a lun to debug. To debug all luns, set this to -1. .El .Pp Users may also enable debugging on the fly by using the .Xr camcontrol 8 utility, if wanted options built into the kernel. See .Xr camcontrol 8 for details. .Sh SEE ALSO .Bl -tag -width 20 .It Sy Commands: .Xr camcontrol 8 , .Xr camdd 8 .It Sy Libraries: .Xr cam 3 .It Sy Periph Drivers: .Xr ada 4 , .Xr da 4 , .Xr nda 4 , .\" .Xr sdda 4 , .Xr pass 4 , .Xr sa 4 .Pp .It Sy SIM Devices: .Xr aac 4 , .Xr aacraid 4 , .Xr ahc 4 , .Xr ahci 4 , .Xr ata 4 , .Xr aw_mmc 4 , .Xr ciss 4 , .Xr hv_storvsc 4 , .Xr isci 4 , .Xr iscsi 4 , .Xr isp 4 , .\" .Xr mmcnull 4 , .Xr mpr 4 , .Xr mps 4 , .Xr mpt 4 , .Xr mrsas 4 , .Xr mvs 4 , .Xr nvme 4 , .Xr pms 4 , .Xr pvscsi 4 , .Xr sdhci 4 , .Xr smartpqi 4 , .Xr sym 4 , .Xr tws 4 , .Xr umass 4 , .Xr virtio_scsi 4 .It Sy Deprecated or Poorly Supported SIM Devices: .Xr ahd 4 , .Xr amr 4 , .Xr arcmsr 4 , .Xr esp 4 , .\" .Xr fslsata 4 , .Xr hpt27xx 4 , .Xr hptiop 4 , .Xr hptmv 4 , .Xr hptnr 4 , .\" .Xr htprr 4 , .Xr iir 4 .Xr mfi 4 , .\" .Xr osc 4 , .\" .Xr ps3cdrom 4 , .Xr sbp 4 , .Xr twa 4 .El .Sh HISTORY The .Nm .Tn SCSI subsystem first appeared in .Fx 3.0 . The .Nm ATA support was added in .Fx 8.0 . .Sh AUTHORS .An -nosplit The .Nm .Tn SCSI subsystem was written by .An Justin Gibbs and .An Kenneth Merry . The .Nm .Tn ATA support was added by .An Alexander Motin Aq Mt mav@FreeBSD.org . The .Nm .Tn NVMe support was added by .An Warner Losh Aq Mt imp@FreeBSD.org .