#
#	@(#)ttys	5.1 (Berkeley) 4/17/89
#
# This file specifies various information about terminals on the system.
# It is used by several different programs.  Common entries for the
# various columns include:
#
# name  The name of the terminal device.
#
# getty The program to start running on the terminal.  Typically a
#       getty program, as the name implies.  Other common entries
#       include none, when no getty is needed, and xdm, to start the
#       X Window System.
#
# type The initial terminal type for this port.  For hardwired
#      terminal lines, this will contain the type of terminal used.
#      For virtual consoles, the correct type is typically xterm.
#      Other common values include dialup for incoming modem ports, and
#      unknown when the terminal type cannot be predetermined.
#
# status Must be on or off.  If on, init will run the getty program on
#        the specified port.  If the word "secure" appears, this tty
#        allows root login.
#
# name	getty				type	status		comments
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console	none				unknown	off secure
#
ttyv0	"/usr/libexec/getty Pc"		xterm	onifexists secure
# Virtual terminals
ttyv1	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv2	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv3	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv4	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv5	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv6	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv7	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv8	"/usr/local/bin/xdm -nodaemon"	xterm	off secure
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyu0	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
ttyu1	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
ttyu2	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
ttyu3	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
# Dumb console
dcons	"/usr/libexec/getty std.9600"	vt100	off secure
# Xen Virtual console
xc0	"/usr/libexec/getty Pc"		xterm	onifconsole secure
# RISC-V HTIF console
rcons	"/usr/libexec/getty std.9600"	vt100	onifconsole secure