/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2003 John Baldwin * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * PIC driver for the 8259A Master and Slave PICs in PC/AT machines. */ #include #include "opt_auto_eoi.h" #include "opt_isa.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef __amd64__ #define SDT_ATPIC SDT_SYSIGT #define GSEL_ATPIC 0 #else #define SDT_ATPIC SDT_SYS386IGT #define GSEL_ATPIC GSEL(GCODE_SEL, SEL_KPL) #endif #define MASTER 0 #define SLAVE 1 #define IMEN_MASK(ai) (IRQ_MASK((ai)->at_irq)) #define NUM_ISA_IRQS 16 static void atpic_init(void *dummy); inthand_t IDTVEC(atpic_intr0), IDTVEC(atpic_intr1), IDTVEC(atpic_intr2), IDTVEC(atpic_intr3), IDTVEC(atpic_intr4), IDTVEC(atpic_intr5), IDTVEC(atpic_intr6), IDTVEC(atpic_intr7), IDTVEC(atpic_intr8), IDTVEC(atpic_intr9), IDTVEC(atpic_intr10), IDTVEC(atpic_intr11), IDTVEC(atpic_intr12), IDTVEC(atpic_intr13), IDTVEC(atpic_intr14), IDTVEC(atpic_intr15); /* XXXKIB i386 uses stubs until pti comes */ inthand_t IDTVEC(atpic_intr0_pti), IDTVEC(atpic_intr1_pti), IDTVEC(atpic_intr2_pti), IDTVEC(atpic_intr3_pti), IDTVEC(atpic_intr4_pti), IDTVEC(atpic_intr5_pti), IDTVEC(atpic_intr6_pti), IDTVEC(atpic_intr7_pti), IDTVEC(atpic_intr8_pti), IDTVEC(atpic_intr9_pti), IDTVEC(atpic_intr10_pti), IDTVEC(atpic_intr11_pti), IDTVEC(atpic_intr12_pti), IDTVEC(atpic_intr13_pti), IDTVEC(atpic_intr14_pti), IDTVEC(atpic_intr15_pti); #define IRQ(ap, ai) ((ap)->at_irqbase + (ai)->at_irq) #define ATPIC(io, base, eoi) { \ .at_pic = { \ .pic_register_sources = atpic_register_sources, \ .pic_enable_source = atpic_enable_source, \ .pic_disable_source = atpic_disable_source, \ .pic_eoi_source = (eoi), \ .pic_enable_intr = atpic_enable_intr, \ .pic_disable_intr = atpic_disable_intr, \ .pic_vector = atpic_vector, \ .pic_source_pending = atpic_source_pending, \ .pic_resume = atpic_resume, \ .pic_config_intr = atpic_config_intr, \ .pic_assign_cpu = atpic_assign_cpu \ }, \ .at_ioaddr = (io), \ .at_irqbase = (base), \ .at_intbase = IDT_IO_INTS + (base), \ .at_imen = 0xff, \ } #define INTSRC(irq) \ { \ .at_intsrc = { &atpics[(irq) / 8].at_pic }, \ .at_intr = IDTVEC(atpic_intr ## irq ), \ .at_intr_pti = IDTVEC(atpic_intr ## irq ## _pti), \ .at_irq = (irq) % 8, \ } struct atpic { struct pic at_pic; int at_ioaddr; int at_irqbase; uint8_t at_intbase; uint8_t at_imen; }; struct atpic_intsrc { struct intsrc at_intsrc; inthand_t *at_intr, *at_intr_pti; int at_irq; /* Relative to PIC base. */ enum intr_trigger at_trigger; u_long at_count; u_long at_straycount; }; static void atpic_register_sources(struct pic *pic); static void atpic_enable_source(struct intsrc *isrc); static void atpic_disable_source(struct intsrc *isrc, int eoi); static void atpic_eoi_master(struct intsrc *isrc); static void atpic_eoi_slave(struct intsrc *isrc); static void atpic_enable_intr(struct intsrc *isrc); static void atpic_disable_intr(struct intsrc *isrc); static int atpic_vector(struct intsrc *isrc); static void atpic_resume(struct pic *pic, bool suspend_cancelled); static int atpic_source_pending(struct intsrc *isrc); static int atpic_config_intr(struct intsrc *isrc, enum intr_trigger trig, enum intr_polarity pol); static int atpic_assign_cpu(struct intsrc *isrc, u_int apic_id); static void i8259_init(struct atpic *pic, int slave); static struct atpic atpics[] = { ATPIC(IO_ICU1, 0, atpic_eoi_master), ATPIC(IO_ICU2, 8, atpic_eoi_slave) }; static struct atpic_intsrc atintrs[] = { INTSRC(0), INTSRC(1), INTSRC(2), INTSRC(3), INTSRC(4), INTSRC(5), INTSRC(6), INTSRC(7), INTSRC(8), INTSRC(9), INTSRC(10), INTSRC(11), INTSRC(12), INTSRC(13), INTSRC(14), INTSRC(15), }; CTASSERT(nitems(atintrs) == NUM_ISA_IRQS); static __inline void _atpic_eoi_master(struct intsrc *isrc) { KASSERT(isrc->is_pic == &atpics[MASTER].at_pic, ("%s: mismatched pic", __func__)); #ifndef AUTO_EOI_1 outb(atpics[MASTER].at_ioaddr, OCW2_EOI); #endif } /* * The data sheet says no auto-EOI on slave, but it sometimes works. * So, if AUTO_EOI_2 is enabled, we use it. */ static __inline void _atpic_eoi_slave(struct intsrc *isrc) { KASSERT(isrc->is_pic == &atpics[SLAVE].at_pic, ("%s: mismatched pic", __func__)); #ifndef AUTO_EOI_2 outb(atpics[SLAVE].at_ioaddr, OCW2_EOI); #ifndef AUTO_EOI_1 outb(atpics[MASTER].at_ioaddr, OCW2_EOI); #endif #endif } static void atpic_register_sources(struct pic *pic) { struct atpic *ap = (struct atpic *)pic; struct atpic_intsrc *ai; int i; /* * If any of the ISA IRQs have an interrupt source already, then * assume that the I/O APICs are being used and don't register any * of our interrupt sources. This makes sure we don't accidentally * use mixed mode. The "accidental" use could otherwise occur on * machines that route the ACPI SCI interrupt to a different ISA * IRQ (at least one machine routes it to IRQ 13) thus disabling * that APIC ISA routing and allowing the ATPIC source for that IRQ * to leak through. We used to depend on this feature for routing * IRQ0 via mixed mode, but now we don't use mixed mode at all. * * To avoid the slave not register sources after the master * registers its sources, register all IRQs when this function is * called on the master. */ if (ap != &atpics[MASTER]) return; for (i = 0; i < NUM_ISA_IRQS; i++) if (intr_lookup_source(i) != NULL) return; /* Loop through all interrupt sources and add them. */ for (i = 0, ai = atintrs; i < NUM_ISA_IRQS; i++, ai++) { if (i == ICU_SLAVEID) continue; intr_register_source(&ai->at_intsrc); } } static void atpic_enable_source(struct intsrc *isrc) { struct atpic_intsrc *ai = (struct atpic_intsrc *)isrc; struct atpic *ap = (struct atpic *)isrc->is_pic; spinlock_enter(); if (ap->at_imen & IMEN_MASK(ai)) { ap->at_imen &= ~IMEN_MASK(ai); outb(ap->at_ioaddr + ICU_IMR_OFFSET, ap->at_imen); } spinlock_exit(); } static void atpic_disable_source(struct intsrc *isrc, int eoi) { struct atpic_intsrc *ai = (struct atpic_intsrc *)isrc; struct atpic *ap = (struct atpic *)isrc->is_pic; spinlock_enter(); if (ai->at_trigger != INTR_TRIGGER_EDGE) { ap->at_imen |= IMEN_MASK(ai); outb(ap->at_ioaddr + ICU_IMR_OFFSET, ap->at_imen); } /* * Take care to call these functions directly instead of through * a function pointer. All of the referenced variables should * still be hot in the cache. */ if (eoi == PIC_EOI) { if (isrc->is_pic == &atpics[MASTER].at_pic) _atpic_eoi_master(isrc); else _atpic_eoi_slave(isrc); } spinlock_exit(); } static void atpic_eoi_master(struct intsrc *isrc) { #ifndef AUTO_EOI_1 spinlock_enter(); _atpic_eoi_master(isrc); spinlock_exit(); #endif } static void atpic_eoi_slave(struct intsrc *isrc) { #ifndef AUTO_EOI_2 spinlock_enter(); _atpic_eoi_slave(isrc); spinlock_exit(); #endif } static void atpic_enable_intr(struct intsrc *isrc) { } static void atpic_disable_intr(struct intsrc *isrc) { } static int atpic_vector(struct intsrc *isrc) { struct atpic_intsrc *ai = (struct atpic_intsrc *)isrc; struct atpic *ap = (struct atpic *)isrc->is_pic; return (IRQ(ap, ai)); } static int atpic_source_pending(struct intsrc *isrc) { struct atpic_intsrc *ai = (struct atpic_intsrc *)isrc; struct atpic *ap = (struct atpic *)isrc->is_pic; return (inb(ap->at_ioaddr) & IMEN_MASK(ai)); } static void atpic_resume(struct pic *pic, bool suspend_cancelled) { struct atpic *ap = (struct atpic *)pic; i8259_init(ap, ap == &atpics[SLAVE]); if (ap == &atpics[SLAVE] && elcr_found) elcr_resume(); } static int atpic_config_intr(struct intsrc *isrc, enum intr_trigger trig, enum intr_polarity pol) { struct atpic_intsrc *ai = (struct atpic_intsrc *)isrc; u_int vector; /* Map conforming values to edge/hi and sanity check the values. */ if (trig == INTR_TRIGGER_CONFORM) trig = INTR_TRIGGER_EDGE; if (pol == INTR_POLARITY_CONFORM) pol = INTR_POLARITY_HIGH; vector = atpic_vector(isrc); if ((trig == INTR_TRIGGER_EDGE && pol == INTR_POLARITY_LOW) || (trig == INTR_TRIGGER_LEVEL && pol == INTR_POLARITY_HIGH)) { printf( "atpic: Mismatched config for IRQ%u: trigger %s, polarity %s\n", vector, trig == INTR_TRIGGER_EDGE ? "edge" : "level", pol == INTR_POLARITY_HIGH ? "high" : "low"); return (EINVAL); } /* If there is no change, just return. */ if (ai->at_trigger == trig) return (0); /* * Certain IRQs can never be level/lo, so don't try to set them * that way if asked. At least some ELCR registers ignore setting * these bits as well. */ if ((vector == 0 || vector == 1 || vector == 2 || vector == 13) && trig == INTR_TRIGGER_LEVEL) { if (bootverbose) printf( "atpic: Ignoring invalid level/low configuration for IRQ%u\n", vector); return (EINVAL); } if (!elcr_found) { if (bootverbose) printf("atpic: No ELCR to configure IRQ%u as %s\n", vector, trig == INTR_TRIGGER_EDGE ? "edge/high" : "level/low"); return (ENXIO); } if (bootverbose) printf("atpic: Programming IRQ%u as %s\n", vector, trig == INTR_TRIGGER_EDGE ? "edge/high" : "level/low"); spinlock_enter(); elcr_write_trigger(atpic_vector(isrc), trig); ai->at_trigger = trig; spinlock_exit(); return (0); } static int atpic_assign_cpu(struct intsrc *isrc, u_int apic_id) { /* * 8259A's are only used in UP in which case all interrupts always * go to the sole CPU and this function shouldn't even be called. */ panic("%s: bad cookie", __func__); } static void i8259_init(struct atpic *pic, int slave) { int imr_addr; /* Reset the PIC and program with next four bytes. */ spinlock_enter(); outb(pic->at_ioaddr, ICW1_RESET | ICW1_IC4); imr_addr = pic->at_ioaddr + ICU_IMR_OFFSET; /* Start vector. */ outb(imr_addr, pic->at_intbase); /* * Setup slave links. For the master pic, indicate what line * the slave is configured on. For the slave indicate * which line on the master we are connected to. */ if (slave) outb(imr_addr, ICU_SLAVEID); else outb(imr_addr, IRQ_MASK(ICU_SLAVEID)); /* Set mode. */ if (slave) outb(imr_addr, SLAVE_MODE); else outb(imr_addr, MASTER_MODE); /* Set interrupt enable mask. */ outb(imr_addr, pic->at_imen); /* Reset is finished, default to IRR on read. */ outb(pic->at_ioaddr, OCW3_SEL | OCW3_RR); /* OCW2_L1 sets priority order to 3-7, 0-2 (com2 first). */ if (!slave) outb(pic->at_ioaddr, OCW2_R | OCW2_SL | OCW2_L1); spinlock_exit(); } void atpic_startup(void) { struct atpic_intsrc *ai; int i; /* Start off with all interrupts disabled. */ i8259_init(&atpics[MASTER], 0); i8259_init(&atpics[SLAVE], 1); atpic_enable_source((struct intsrc *)&atintrs[ICU_SLAVEID]); /* Install low-level interrupt handlers for all of our IRQs. */ for (i = 0, ai = atintrs; i < NUM_ISA_IRQS; i++, ai++) { if (i == ICU_SLAVEID) continue; ai->at_intsrc.is_count = &ai->at_count; ai->at_intsrc.is_straycount = &ai->at_straycount; setidt(((struct atpic *)ai->at_intsrc.is_pic)->at_intbase + ai->at_irq, pti ? ai->at_intr_pti : ai->at_intr, SDT_ATPIC, SEL_KPL, GSEL_ATPIC); } /* * Look for an ELCR. If we find one, update the trigger modes. * If we don't find one, assume that IRQs 0, 1, 2, and 13 are * edge triggered and that everything else is level triggered. * We only use the trigger information to reprogram the ELCR if * we have one and as an optimization to avoid masking edge * triggered interrupts. For the case that we don't have an ELCR, * it doesn't hurt to mask an edge triggered interrupt, so we * assume level trigger for any interrupt that we aren't sure is * edge triggered. */ if (elcr_found) { for (i = 0, ai = atintrs; i < NUM_ISA_IRQS; i++, ai++) ai->at_trigger = elcr_read_trigger(i); } else { for (i = 0, ai = atintrs; i < NUM_ISA_IRQS; i++, ai++) switch (i) { case 0: case 1: case 2: case 8: case 13: ai->at_trigger = INTR_TRIGGER_EDGE; break; default: ai->at_trigger = INTR_TRIGGER_LEVEL; break; } } } static void atpic_init(void *dummy __unused) { /* * Register our PICs, even if we aren't going to use any of their * pins so that they are suspended and resumed. */ if (intr_register_pic(&atpics[0].at_pic) != 0 || intr_register_pic(&atpics[1].at_pic) != 0) panic("Unable to register ATPICs"); if (num_io_irqs == 0) num_io_irqs = NUM_ISA_IRQS; } SYSINIT(atpic_init, SI_SUB_INTR, SI_ORDER_FOURTH, atpic_init, NULL); void atpic_handle_intr(u_int vector, struct trapframe *frame) { struct intsrc *isrc; kasan_mark(frame, sizeof(*frame), sizeof(*frame), 0); kmsan_mark(frame, sizeof(*frame), KMSAN_STATE_INITED); trap_check_kstack(); KASSERT(vector < NUM_ISA_IRQS, ("unknown int %u\n", vector)); isrc = &atintrs[vector].at_intsrc; /* * If we don't have an event, see if this is a spurious * interrupt. */ if (isrc->is_event == NULL && (vector == 7 || vector == 15)) { int port, isr; /* * Read the ISR register to see if IRQ 7/15 is really * pending. Reset read register back to IRR when done. */ port = ((struct atpic *)isrc->is_pic)->at_ioaddr; spinlock_enter(); outb(port, OCW3_SEL | OCW3_RR | OCW3_RIS); isr = inb(port); outb(port, OCW3_SEL | OCW3_RR); spinlock_exit(); if ((isr & IRQ_MASK(7)) == 0) return; } intr_execute_handlers(isrc, frame); } #ifdef DEV_ISA /* * Bus attachment for the ISA PIC. */ static struct isa_pnp_id atpic_ids[] = { { 0x0000d041 /* PNP0000 */, "AT interrupt controller" }, { 0 } }; static int atpic_probe(device_t dev) { int result; result = ISA_PNP_PROBE(device_get_parent(dev), dev, atpic_ids); if (result <= 0) device_quiet(dev); return (result); } /* * We might be granted IRQ 2, as this is typically consumed by chaining * between the two PIC components. If we're using the APIC, however, * this may not be the case, and as such we should free the resource. * (XXX untested) * * The generic ISA attachment code will handle allocating any other resources * that we don't explicitly claim here. */ static int atpic_attach(device_t dev) { struct resource *res; int rid; /* Try to allocate our IRQ and then free it. */ rid = 0; res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 0); if (res != NULL) bus_release_resource(dev, SYS_RES_IRQ, rid, res); return (0); } static device_method_t atpic_methods[] = { /* Device interface */ DEVMETHOD(device_probe, atpic_probe), DEVMETHOD(device_attach, atpic_attach), { 0, 0 } }; static driver_t atpic_driver = { "atpic", atpic_methods, 1, /* no softc */ }; DRIVER_MODULE(atpic, isa, atpic_driver, 0, 0); DRIVER_MODULE(atpic, acpi, atpic_driver, 0, 0); ISA_PNP_INFO(atpic_ids); #endif /* DEV_ISA */