/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2011 Sandvine Incorporated ULC. * Copyright (c) 2012 iXsystems, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Support for Winbond watchdog. * * With minor abstractions it might be possible to add support for other * different Winbond Super I/O chips as well. Winbond seems to have four * different types of chips, four different ways to get into extended config * mode. * * Note: there is no serialization between the debugging sysctl handlers and * the watchdog functions and possibly others poking the registers at the same * time. For that at least possibly interfering sysctls are hidden by default. */ #include #include #include #include #include #include #include #include #include #include #include #include /* * Global registers. */ #define WB_DEVICE_ID_REG 0x20 /* Device ID */ #define WB_DEVICE_REV_REG 0x21 /* Device revision */ #define WB_CR26 0x26 /* Bit6: HEFRAS (base port selector) */ /* LDN selection. */ #define WB_LDN_REG 0x07 #define WB_LDN_REG_LDN8 0x08 /* GPIO 2, Watchdog */ /* * LDN8 (GPIO 2, Watchdog) specific registers and options. */ /* CR30: LDN8 activation control. */ #define WB_LDN8_CR30 0x30 #define WB_LDN8_CR30_ACTIVE 0x01 /* 1: LD active */ /* CRF5: Watchdog scale, P20. Mapped to reg_1. */ #define WB_LDN8_CRF5 0xF5 #define WB_LDN8_CRF5_SCALE 0x08 /* 0: 1s, 1: 60s */ #define WB_LDN8_CRF5_KEYB_P20 0x04 /* 1: keyb P20 forces timeout */ #define WB_LDN8_CRF5_KBRST 0x02 /* 1: timeout causes pin60 kbd reset */ /* CRF6: Watchdog Timeout (0 == off). Mapped to reg_timeout. */ #define WB_LDN8_CRF6 0xF6 /* CRF7: Watchdog mouse, keyb, force, .. Mapped to reg_2. */ #define WB_LDN8_CRF7 0xF7 #define WB_LDN8_CRF7_MOUSE 0x80 /* 1: mouse irq resets wd timer */ #define WB_LDN8_CRF7_KEYB 0x40 /* 1: keyb irq resets wd timer */ #define WB_LDN8_CRF7_FORCE 0x20 /* 1: force timeout (self-clear) */ #define WB_LDN8_CRF7_TS 0x10 /* 0: counting, 1: fired */ #define WB_LDN8_CRF7_IRQS 0x0f /* irq source for watchdog, 2 == SMI */ enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf, w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p, w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793, nct6795, nct6102 }; struct wb_softc { device_t dev; eventhandler_tag ev_tag; enum chips chip; uint8_t ctl_reg; uint8_t time_reg; uint8_t csr_reg; int debug_verbose; /* * Special feature to let the watchdog fire at a different * timeout as set by watchdog(4) but still use that API to * re-load it periodically. */ unsigned int timeout_override; /* * Space to save current state temporary and for sysctls. * We want to know the timeout value and usually need two * additional registers for options. Do not name them by * register as these might be different by chip. */ uint8_t reg_timeout; uint8_t reg_1; uint8_t reg_2; }; struct winbond_vendor_device_id { uint8_t device_id; enum chips chip; const char * descr; } wb_devs[] = { { .device_id = 0x52, .chip = w83627hf, .descr = "Winbond 83627HF/F/HG/G", }, { .device_id = 0x59, .chip = w83627s, .descr = "Winbond 83627S", }, { .device_id = 0x60, .chip = w83697hf, .descr = "Winbond 83697HF", }, { .device_id = 0x68, .chip = w83697ug, .descr = "Winbond 83697UG", }, { .device_id = 0x70, .chip = w83637hf, .descr = "Winbond 83637HF", }, { .device_id = 0x82, .chip = w83627thf, .descr = "Winbond 83627THF", }, { .device_id = 0x85, .chip = w83687thf, .descr = "Winbond 83687THF", }, { .device_id = 0x88, .chip = w83627ehf, .descr = "Winbond 83627EHF", }, { .device_id = 0xa0, .chip = w83627dhg, .descr = "Winbond 83627DHG", }, { .device_id = 0xa2, .chip = w83627uhg, .descr = "Winbond 83627UHG", }, { .device_id = 0xa5, .chip = w83667hg, .descr = "Winbond 83667HG", }, { .device_id = 0xb0, .chip = w83627dhg_p, .descr = "Winbond 83627DHG-P", }, { .device_id = 0xb3, .chip = w83667hg_b, .descr = "Winbond 83667HG-B", }, { .device_id = 0xb4, .chip = nct6775, .descr = "Nuvoton NCT6775", }, { .device_id = 0xc3, .chip = nct6776, .descr = "Nuvoton NCT6776", }, { .device_id = 0xc4, .chip = nct6102, .descr = "Nuvoton NCT6102", }, { .device_id = 0xc5, .chip = nct6779, .descr = "Nuvoton NCT6779", }, { .device_id = 0xc8, .chip = nct6791, .descr = "Nuvoton NCT6791", }, { .device_id = 0xc9, .chip = nct6792, .descr = "Nuvoton NCT6792", }, { .device_id = 0xd1, .chip = nct6793, .descr = "Nuvoton NCT6793", }, { .device_id = 0xd3, .chip = nct6795, .descr = "Nuvoton NCT6795", }, }; /* * Return the watchdog related registers as we last read them. This will * usually not give the current timeout or state on whether the watchdog * fired. */ static int sysctl_wb_debug(SYSCTL_HANDLER_ARGS) { struct wb_softc *sc; struct sbuf sb; int error; sc = arg1; sbuf_new_for_sysctl(&sb, NULL, 64, req); sbuf_printf(&sb, "LDN8 (GPIO2, Watchdog): "); sbuf_printf(&sb, "CR%02X 0x%02x ", sc->ctl_reg, sc->reg_1); sbuf_printf(&sb, "CR%02X 0x%02x ", sc->time_reg, sc->reg_timeout); sbuf_printf(&sb, "CR%02X 0x%02x", sc->csr_reg, sc->reg_2); error = sbuf_finish(&sb); sbuf_delete(&sb); return (error); } /* * Read the current values before returning them. Given this might poke * the registers the same time as the watchdog, this sysctl handler should * be marked CTLFLAG_SKIP to not show up by default. */ static int sysctl_wb_debug_current(SYSCTL_HANDLER_ARGS) { struct wb_softc *sc; sc = arg1; sc->reg_1 = superio_read(sc->dev, sc->ctl_reg); sc->reg_timeout = superio_read(sc->dev, sc->time_reg); sc->reg_2 = superio_read(sc->dev, sc->csr_reg); return (sysctl_wb_debug(oidp, arg1, arg2, req)); } /* * Sysctl handlers to force a watchdog timeout or to test the NMI functionality * works as expetced. * For testing we could set a test_nmi flag in the softc that, in case of NMI, a * callback function from trap.c could check whether we fired and not report the * timeout but clear the flag for the sysctl again. This is interesting given a * lot of boards have jumpers to change the action on watchdog timeout or * disable the watchdog completely. * XXX-BZ notyet: currently no general infrastructure exists to do this. */ static int sysctl_wb_force_test_nmi(SYSCTL_HANDLER_ARGS) { struct wb_softc *sc; int error, val; sc = arg1; #ifdef notyet val = sc->test_nmi; #else val = 0; #endif error = sysctl_handle_int(oidp, &val, 0, req); if (error || !req->newptr) return (error); #ifdef notyet int test = arg2; /* Manually clear the test for a value of 0 and do nothing else. */ if (test && val == 0) { sc->test_nmi = 0; return (0); } /* * If we are testing the NMI functionality, set the flag before * forcing the timeout. */ if (test) sc->test_nmi = 1; #endif /* Force watchdog to fire. */ sc->reg_2 = superio_read(sc->dev, sc->csr_reg); sc->reg_2 |= WB_LDN8_CRF7_FORCE; superio_write(sc->dev, sc->csr_reg, sc->reg_2); return (0); } /* * Print current watchdog state. * * Note: it is the responsibility of the caller to update the registers * upfront. */ static void wb_print_state(struct wb_softc *sc, const char *msg) { device_printf(sc->dev, "%s%sWatchdog %sabled. %s" "Scaling by %ds, timer at %d (%s=%ds%s). " "CR%02X 0x%02x CR%02X 0x%02x\n", (msg != NULL) ? msg : "", (msg != NULL) ? ": " : "", (sc->reg_timeout > 0x00) ? "en" : "dis", (sc->reg_2 & WB_LDN8_CRF7_TS) ? "Watchdog fired. " : "", (sc->reg_1 & WB_LDN8_CRF5_SCALE) ? 60 : 1, sc->reg_timeout, (sc->reg_timeout > 0x00) ? "<" : "", sc->reg_timeout * ((sc->reg_1 & WB_LDN8_CRF5_SCALE) ? 60 : 1), (sc->reg_timeout > 0x00) ? " left" : "", sc->ctl_reg, sc->reg_1, sc->csr_reg, sc->reg_2); } /* * (Re)load the watchdog counter depending on timeout. A timeout of 0 will * disable the watchdog. */ static int wb_set_watchdog(struct wb_softc *sc, unsigned int timeout) { if (timeout != 0) { /* * In case an override is set, let it override. It may lead * to strange results as we do not check the input of the sysctl. */ if (sc->timeout_override > 0) timeout = sc->timeout_override; /* Make sure we support the requested timeout. */ if (timeout > 255 * 60) return (EINVAL); } if (sc->debug_verbose) wb_print_state(sc, "Before watchdog counter (re)load"); if (timeout == 0) { /* Disable watchdog. */ sc->reg_timeout = 0; superio_write(sc->dev, sc->time_reg, sc->reg_timeout); } else { /* Read current scaling factor. */ sc->reg_1 = superio_read(sc->dev, sc->ctl_reg); if (timeout > 255) { /* Set scaling factor to 60s. */ sc->reg_1 |= WB_LDN8_CRF5_SCALE; sc->reg_timeout = (timeout / 60); if (timeout % 60) sc->reg_timeout++; } else { /* Set scaling factor to 1s. */ sc->reg_1 &= ~WB_LDN8_CRF5_SCALE; sc->reg_timeout = timeout; } /* In case we fired before we need to clear to fire again. */ sc->reg_2 = superio_read(sc->dev, sc->csr_reg); if (sc->reg_2 & WB_LDN8_CRF7_TS) { sc->reg_2 &= ~WB_LDN8_CRF7_TS; superio_write(sc->dev, sc->csr_reg, sc->reg_2); } /* Write back scaling factor. */ superio_write(sc->dev, sc->ctl_reg, sc->reg_1); /* Set timer and arm/reset the watchdog. */ superio_write(sc->dev, sc->time_reg, sc->reg_timeout); } if (sc->debug_verbose) wb_print_state(sc, "After watchdog counter (re)load"); return (0); } /* * watchdog(9) EVENTHANDLER function implementation to (re)load the counter * with the given timeout or disable the watchdog. */ static void wb_watchdog_fn(void *private, u_int cmd, int *error) { struct wb_softc *sc; unsigned int timeout; int e; sc = private; KASSERT(sc != NULL, ("%s: watchdog handler function called without " "softc.", __func__)); cmd &= WD_INTERVAL; if (cmd > 0 && cmd <= 63) { /* Reset (and arm) watchdog. */ timeout = ((uint64_t)1 << cmd) / 1000000000; if (timeout == 0) timeout = 1; e = wb_set_watchdog(sc, timeout); if (e == 0) { if (error != NULL) *error = 0; } else { /* On error, try to make sure the WD is disabled. */ wb_set_watchdog(sc, 0); } } else { /* Disable watchdog. */ e = wb_set_watchdog(sc, 0); if (e != 0 && cmd == 0 && error != NULL) { /* Failed to disable watchdog. */ *error = EOPNOTSUPP; } } } static int wb_probe(device_t dev) { struct wb_softc *sc; int j; uint8_t devid; uint8_t revid; if (superio_vendor(dev) != SUPERIO_VENDOR_NUVOTON) return (ENXIO); if (superio_get_type(dev) != SUPERIO_DEV_WDT) return (ENXIO); sc = device_get_softc(dev); devid = superio_devid(dev) >> 8; revid = superio_revid(dev); for (j = 0; j < nitems(wb_devs); j++) { if (wb_devs[j].device_id == devid) { sc->chip = wb_devs[j].chip; device_set_descf(dev, "%s (0x%02x/0x%02x) Watchdog Timer", wb_devs[j].descr, devid, revid); return (BUS_PROBE_SPECIFIC); } } if (bootverbose) { device_printf(dev, "unrecognized chip: devid 0x%02x, revid 0x%02x\n", devid, revid); } return (ENXIO); } static int wb_attach(device_t dev) { struct wb_softc *sc; struct sysctl_ctx_list *sctx; struct sysctl_oid *soid; unsigned long timeout; uint8_t t; sc = device_get_softc(dev); sc->dev = dev; /* Make sure WDT is enabled. */ superio_dev_enable(dev, WB_LDN8_CR30_ACTIVE); switch (sc->chip) { case w83697hf: case w83697ug: sc->ctl_reg = 0xf3; sc->time_reg = 0xf4; sc->csr_reg = 0xf7; break; case nct6102: sc->ctl_reg = 0xf0; sc->time_reg = 0xf1; sc->csr_reg = 0xf2; break; default: sc->ctl_reg = 0xf5; sc->time_reg = 0xf6; sc->csr_reg = 0xf7; break; } switch (sc->chip) { case w83627hf: case w83627s: t = superio_read(dev, 0x2B) & ~0x10; superio_write(dev, 0x2B, t); /* set GPIO24 to WDT0 */ break; case w83697hf: /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ t = superio_read(dev, 0x29) & ~0x60; t |= 0x20; superio_write(dev, 0x29, t); break; case w83697ug: /* Set pin 118 to WDTO# mode */ t = superio_read(dev, 0x2b) & ~0x04; superio_write(dev, 0x2b, t); break; case w83627thf: t = (superio_read(dev, 0x2B) & ~0x08) | 0x04; superio_write(dev, 0x2B, t); /* set GPIO3 to WDT0 */ break; case w83627dhg: case w83627dhg_p: t = superio_read(dev, 0x2D) & ~0x01; /* PIN77 -> WDT0# */ superio_write(dev, 0x2D, t); /* set GPIO5 to WDT0 */ t = superio_read(dev, sc->ctl_reg); t |= 0x02; /* enable the WDTO# output low pulse * to the KBRST# pin */ superio_write(dev, sc->ctl_reg, t); break; case w83637hf: break; case w83687thf: t = superio_read(dev, 0x2C) & ~0x80; /* PIN47 -> WDT0# */ superio_write(dev, 0x2C, t); break; case w83627ehf: case w83627uhg: case w83667hg: case w83667hg_b: case nct6775: case nct6776: case nct6779: case nct6791: case nct6792: case nct6793: case nct6795: case nct6102: /* * These chips have a fixed WDTO# output pin (W83627UHG), * or support more than one WDTO# output pin. * Don't touch its configuration, and hope the BIOS * does the right thing. */ t = superio_read(dev, sc->ctl_reg); t |= 0x02; /* enable the WDTO# output low pulse * to the KBRST# pin */ superio_write(dev, sc->ctl_reg, t); break; default: break; } /* Read the current watchdog configuration. */ sc->reg_1 = superio_read(dev, sc->ctl_reg); sc->reg_timeout = superio_read(dev, sc->time_reg); sc->reg_2 = superio_read(dev, sc->csr_reg); /* Print current state if bootverbose or watchdog already enabled. */ if (bootverbose || (sc->reg_timeout > 0x00)) wb_print_state(sc, "Before watchdog attach"); sc->reg_1 &= ~WB_LDN8_CRF5_KEYB_P20; sc->reg_1 |= WB_LDN8_CRF5_KBRST; superio_write(dev, sc->ctl_reg, sc->reg_1); /* * Clear a previous watchdog timeout event (if still set). * Disable timer reset on mouse interrupts. Leave reset on keyboard, * since one of my boards is getting stuck in reboot without it. */ sc->reg_2 &= ~(WB_LDN8_CRF7_MOUSE|WB_LDN8_CRF7_TS); superio_write(dev, sc->csr_reg, sc->reg_2); /* Read global timeout override tunable, Add per device sysctls. */ if (TUNABLE_ULONG_FETCH("hw.wbwd.timeout_override", &timeout)) { if (timeout > 0) sc->timeout_override = timeout; } sctx = device_get_sysctl_ctx(dev); soid = device_get_sysctl_tree(dev); SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "timeout_override", CTLFLAG_RW, &sc->timeout_override, 0, "Timeout in seconds overriding default watchdog timeout"); SYSCTL_ADD_INT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "debug_verbose", CTLFLAG_RW, &sc->debug_verbose, 0, "Enables extra debugging information"); SYSCTL_ADD_PROC(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "debug", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, sc, 0, sysctl_wb_debug, "A", "Selected register information from last change by driver"); SYSCTL_ADD_PROC(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "debug_current", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_SKIP | CTLFLAG_MPSAFE, sc, 0, sysctl_wb_debug_current, "A", "Selected register information (may interfere)"); SYSCTL_ADD_PROC(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "force_timeout", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_SKIP | CTLFLAG_MPSAFE, sc, 0, sysctl_wb_force_test_nmi, "I", "Enable to force watchdog to fire."); /* Register watchdog. */ sc->ev_tag = EVENTHANDLER_REGISTER(watchdog_list, wb_watchdog_fn, sc, 0); if (bootverbose) wb_print_state(sc, "After watchdog attach"); return (0); } static int wb_detach(device_t dev) { struct wb_softc *sc; sc = device_get_softc(dev); /* Unregister and stop the watchdog if running. */ if (sc->ev_tag) EVENTHANDLER_DEREGISTER(watchdog_list, sc->ev_tag); wb_set_watchdog(sc, 0); /* Bus subroutines take care of sysctls already. */ return (0); } static device_method_t wb_methods[] = { /* Device interface */ DEVMETHOD(device_probe, wb_probe), DEVMETHOD(device_attach, wb_attach), DEVMETHOD(device_detach, wb_detach), DEVMETHOD_END }; static driver_t wb_driver = { "wbwd", wb_methods, sizeof(struct wb_softc) }; DRIVER_MODULE(wb, superio, wb_driver, NULL, NULL); MODULE_DEPEND(wb, superio, 1, 1, 1); MODULE_VERSION(wb, 1);