.\" This module is believed to contain source code proprietary to AT&T.
.\" Use and redistribution is subject to the Berkeley Software License
.\" Agreement and your Software Agreement with AT&T (Western Electric).
.\" Copyright (C) Caldera International Inc. 2001-2002.  All rights reserved.
.\" 
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions are
.\" met:
.\" 
.\" Redistributions of source code and documentation must retain the above
.\" copyright notice, this list of conditions and the following
.\" disclaimer.
.\" 
.\" Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 
.\" All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" 
.\" This product includes software developed or owned by Caldera
.\" International, Inc.  Neither the name of Caldera International, Inc.
.\" nor the names of other contributors may be used to endorse or promote
.\" products derived from this software without specific prior written
.\" permission.
.\" 
.\" USE OF THE SOFTWARE PROVIDED FOR UNDER THIS LICENSE BY CALDERA
.\" INTERNATIONAL, INC.  AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
.\" WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
.\" DISCLAIMED.  IN NO EVENT SHALL CALDERA INTERNATIONAL, INC. BE LIABLE
.\" FOR ANY DIRECT, INDIRECT INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
.\" BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
.\" WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
.\" OR OTHERWISE) RISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
.\" IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\" 
.\"
.NH
Fonts and Special Characters
.PP
.UL troff
and the typesetter allow four different fonts at any one time.
Normally three fonts (Times roman, italic and bold) and one collection of special characters
are permanently
mounted.
.P1 2
.ft R
abcdefghijklmnopqrstuvwxyz 0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
.ft I
abcdefghijklmnopqrstuvwxyz 0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
.ft B
abcdefghijklmnopqrstuvwxyz 0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
.ft R
.P2
The
greek, mathematical symbols and miscellany
of the special font are
listed in Appendix A.
.PP
.UL troff
prints in roman unless told otherwise.
To switch into bold, use
the
.BD .ft
command
.P1
^ft B
.P2
and for italics,
.P1
^ft I
.P2
To return to roman, use
.BD .ft\ R ;
to return to the previous font,
whatever it was,
use either
.BD .ft\ P
or just
.BD .ft  .
The `underline' command
.P1
^ul
.P2
causes the next input line to print in italics.
.BD .ul
can be followed by a count to
indicate that more than one line is to be italicized.
.PP
Fonts can also be changed within a line or word
with the in-line command
.BD \ef :
.P1
\fBbold\fIface\fR text
.P2
is produced by
.P1
\efBbold\efIface\efR text
.P2
If you want to do this so the previous font, whatever it was,
is left undisturbed, insert extra
.BD \efP
commands, like this:
.P1
\efBbold\efP\efIface\efP\efR text\efP
.P2
Because only the immediately previous font is remembered,
you have to restore the previous font after each change
or you can lose it.
The same is true of 
.BD .ps
and
.BD .vs
when used without an argument.
.PP
There are other fonts available besides the standard set,
although you can still use only four at any given time.
The command
.BD .fp
tells
.UL troff
what fonts are physically mounted on the typesetter:
.P1
^fp 3 H
.P2
says that the Helvetica font is mounted on position 3.
(The complete list of font sizes and styles depends on
your typesetter or laser printer.)
Appropriate
.BD .fp
commands should appear at the beginning of your document
if you do not use the standard fonts.
.PP
It is possible to make a document relatively independent
of the actual fonts used to print it
by using font numbers instead of names;
for example,
.BD \ef3
and
.BD .ft\ 3
mean `whatever font is mounted at position 3',
and thus work for any setting.
Normal settings are roman font on 1, italic on 2,
bold on 3,
and special on 4.
.PP
There is also a way to get `synthetic' bold fonts
by overstriking letters with a slight offset.
Look at the
.BD .bd
command in [1].
.WS
.PP
Special characters have four-character names beginning with
.BD \e( ,
and they may be inserted anywhere.
For example,
.P1
\(14 + \(12 = \(34
.P2
is produced by
.P1
\e(14 + \e(12 = \e(34
.P2
In particular,
greek letters are all of the form
.BD  \e(*\- ,
where
.BD \-
is an upper or lower case roman letter
reminiscent of the greek.
Thus
to get
.P1
\(*S(\(*a\(mu\(*b) \(-> \(if
.P2
in bare
.UL troff
we have to type
.P1
\e(*S(\e(*a\e(mu\e(*b) \e(\(mi> \e(if
.P2
That line is unscrambled as follows:
.P1
.ta 1i 2i 3i
\e(*S	\(*S
(	(
\e(*a	\(*a
\e(mu	\(mu
\e(*b	\(*b
)	)
\e(\(mi>	\(->
\e(if	\(if
.P2
A complete list of these special names occurs in Appendix A.
.PP
In
.UL eqn 
[2]
the same effect can be achieved with the input
.P1
SIGMA ( alpha times beta ) \-> inf
.P2
which is less concise, but clearer to the uninitiated.
.PP
Notice that
each
four-character name is a single character
as far as
.UL troff
is concerned _
the
`translate' command
.P1
^tr \e(mi\e(em
.P2
is perfectly clear, meaning
.P1
^tr \(mi\(em
.P2
that is, to translate \(mi into \(em.
.PP
Some characters are automatically translated into others:
grave  \(ga  and acute  \(aa  accents (apostrophes) become open and close single quotes
`\|'\|;
the combination of ``...'' is generally preferable to the double quotes "...".
Similarly a typed minus sign becomes a hyphen -.
To print an explicit \- sign, use
.BD \e\|- .
To get a backslash printed, use
.BD \ee .