--- INSTALL.orig	Mon Feb 22 04:46:07 1993
+++ INSTALL	Sat May 24 21:46:37 1997
@@ -8,23 +8,23 @@
 You need to add an entry in /etc/printcap.  Here's the entry I use:
 
 lp|ps:\
-	:br#38400:lp=/dev/ttya:mx#0:sf:sh:rw:sb:\
+	:br#38400:lp=/dev/ttyd0:mx#0:sf:sh:rw:sb:\
 	:fc#0177777:fs#003:ms=-isig,igncr,cstopb,-echok:\
-	:af=/usr/adm/psacct:lf=/usr/adm/pslog:sd=/usr/spool/pslpd:\
-	:if=/usr/local/lib/psif:
+	:af=/var/log/psacct:lf=/var/log/pslog:sd=/var/spool/output/pslpd:\
+	:if=/usr/local/libexec/psif:
 
-This entry would be appropriate if you were using /dev/ttya and a baud
+This entry would be appropriate if you were using /dev/ttyd0 and a baud
 rate of 38400.  Note that the `sf', `rw' and `sb' capabilities are
-essential.  You need to create the spool directory (/usr/spool/pslpd),
-the accounting file (/usr/adm/psacct), and the log file
-(/usr/adm/pslog).  The spool directory and the accounting file should
+essential.  You need to create the spool directory (/var/spool/output/pslpd),
+the accounting file (/var/log/psacct), and the log file
+(/var/log/pslog).  The spool directory and the accounting file should
 be owned by daemon, the log file by root. You can use other names if
 you want.  The `ms' capabability is a Sun extension.  If you decide to
 make use of the patches in lpr.diff, you should also add the `ex'
 boolean capability (the patches also add the `ms' capability.)
 
 If you wish to have banner printing, then you should add
-`of=/usr/local/lib/psof', and remove the `sh' capability.  You will
+`of=/usr/local/libexec/psof', and remove the `sh' capability.  You will
 probably also wnat to modify the banner printing code in banner.ps.
 As distributed, it provides a fairly minimalist banner page.  Note
 that psof requires the `sb' capability.  If your printer stacks face
@@ -35,12 +35,12 @@
 You can add easily add other filters. For example, suppose you want to
 add a filter for dvi files. Then add an entry to /etc/printcap:
 
-  :df=/usr/local/lib/psdf:
+  :df=/usr/local/libexec/psdf:
 
-Then create a shell script /usr/local/lib/psdf
+Then create a shell script /usr/local/libexec/psdf
 
 #!/bin/sh
-/usr/local/bin/dvitops | /usr/local/lib/lprps "$@"
+/usr/local/bin/dvitops | /usr/local/libexec/lprps "$@"
 
 Replace `/usr/local/bin/dvitops' by the name of your favourite dvi to
 ps program (it must be able to read from the standard input). Then you
@@ -49,11 +49,11 @@
 You must also set the printer's communication parameters. Make sure
 you have an entry like this in /etc/remote:
 
-  ttya:dv=/dev/ttya:br#1200:el=^D:
+  ttyd0:dv=/dev/ttyd0:br#1200:el=^D:
 
 Set the switch on your printer to position labelled 1200 or 0. Then 
 
-  tip ttya
+  tip ttyd0
 
 (*)Now carefully type