# XLibre ports categories and other things needed to build XLibre ports.
# This is intended only for ports of XLibre and related applications.
#
# Use USES=xlibre and USE_XLIBRE to depend on various XLibre components.
#
# Feature:	xlibre-cat
# Usage:	USES=xlibre-cat:category[,buildsystem]
#
# 		category is one of:
# 		* driver   depends on xorgproto at least
#
# 		Bleow are the old freedesktop.org categories and their comments
# 		XLibre only hosts the driver category and the xserver, these
# 		categoryes are disabled now, but kept in a commented state for
#		if they be added to XLibre in the future.
#
# 		* app      Installs applications, no shared libraries.
# 		* data     Installs only data.
# 		* doc      no particular notes
# 		* font     don't install .pc file
# 		* lib      various dependencies, install .pc file, needs
# 		           pathfix
# 		* proto    install .pc file, needs pathfix, most only needed at
# 		           build time.
# 		* util     no particular notes
#
# 		These categories has to match upstream categories.  Don't invent
# 		your own.
#
# 		builsystem is one of:
# 		* autotools (default)
# 		* meson (experimental)
#
#
#
#.MAINTAINER:	b-aazbsd@proton.me

.if !defined(_INCLUDE_USES_XLIBRE_CAT_MK)
_INCLUDE_USES_XLIBRE_CAT_MK=yes

#_XLIBRE_CATEGORIES=	app data doc driver font lib proto util
_XLIBRE_CATEGORIES=	driver server
_XLIBRE_BUILDSYSTEMS=	autotools meson

_XLIBRE_CAT=		# empty
_XLIBRE_BUILDSYS=	# empty

.  if empty(xlibre-cat_ARGS)
IGNORE=		no arguments specified to xlibre-cat
.  endif

.  for _arg in ${xlibre-cat_ARGS}
.    if ${_XLIBRE_CATEGORIES:M${_arg}}
.      if empty(_XLIBRE_CAT)
_XLIBRE_CAT=	${_arg}
.      else
IGNORE=		multipe xlibre categories specified via xlibre-cat:${xlibre-cat_ARGS:ts,}
.      endif
.    elif ${_XLIBRE_BUILDSYSTEMS:M${_arg}}
.      if empty(_XLIBRE_BUILDSYS)
_XLIBRE_BUILDSYS=	${_arg}
.      else
IGNORE=		multipe xlibre build systems specified via xlibre-cat:${xlibre-cat_ARGS:ts,}
.      endif
.    else
IGNORE=		unknown argument specified via xlibre-cat:${xlibre-cat_ARGS:ts,}
.    endif
.  endfor

.  if ${_XLIBRE_CAT} == server
.    if ${_XLIBRE_BUILDSYS} == autotools
IGNORE=		autotools build systems specified for the servers via xlibre-cat:${xlibre-cat_ARGS:ts,}, they only support meson.
.    endif
_XLIBRE_BUILDSYS= meson
.  endif

# Default to the autotools build system
.  if empty(_XLIBRE_BUILDSYS)
_XLIBRE_BUILDSYS=		autotools
.  endif

# Default variables, common to all new modular xorg ports.
.  if empty(USES:Mtar)
EXTRACT_SUFX?=		.tar.bz2
.  endif

DIST_SUBDIR=	xlibre/${_XLIBRE_CAT}
# Do not set the DIST_SUBDIR to xlibre for XLibre flavors of 3rd party ports.
.  if !empty(PKGNAMEPREFIX) && ${PKGNAMEPREFIX} == xlibre- && ${_XLIBRE_CAT} == driver
DIST_SUBDIR=	xorg/${_XLIBRE_CAT}
.  endif

.  if ${_XLIBRE_BUILDSYS} == meson
.include "${USESDIR}/meson.mk"
.  elif ${_XLIBRE_BUILDSYS} == autotools
GNU_CONFIGURE=		yes
.  else
# This should not happen
IGNORE=		unknown build system specified via xlibre-cat:${xlibre-cat_ARGS:ts,}
.  endif

# Set up things for fetching from XLibre GitHub.
# This can be overridden using normal GH_* macros in the ports Makefile.
# We make a best guess for GH_PROJECT.
USE_GITHUB?=		yes
GH_ACCOUNT?=		X11Libre

# Do not do the bellow for XLibre flavors of 3rd party ports.
.  if empty(PKGNAMEPREFIX) || ${PKGNAMEPREFIX} != xlibre-
# Set the GitHub upstream.
.    if ${_XLIBRE_CAT} == driver
# Removes the xlibre- suffix from the PORTNAME
GH_PROJECT?=		${PORTNAME:tl:C/xlibre-//}
GH_TAGNAME?=	${PORTNAME}-${PORTVERSION}
.    elif ${_XLIBRE_CAT} == server
GH_PROJECT?=		xserver
GH_TAGNAME?=	xlibre-xserver-${PORTVERSION}
.    else
GH_PROJECT?=		${PORTNAME:tl}
.    endif
# Add conflicts between X.Org and XLibre variants of X drivers:
CONFLICTS=	${PORTNAME:tl:C/xlibre-//}
.  endif

.  if ${_XLIBRE_BUILDSYS} == meson
# Set up meson stuff here
.  else
# Things from GitHub doesn't come with pre-generated configure, add dependency
# on autoreconf and run it, if we're using autotools.
.include "${USESDIR}/autoreconf.mk"
.  endif

#
# All xlibre ports needs pkgconfig to build, but some ports look for pkgconfig
# and then continue the build.
#
.include "${USESDIR}/pkgconfig.mk"

#
# All xlibre ports need xorg-macros except for the server.
#
.  if ${PORTNAME} != xorg-macros && ${_XLIBRE_CAT} != server
USE_XLIBRE+=      xlibre-macros
.  endif

#.  if ${_XLIBRE_CAT} == app
# Nothing at the moment
#
#.  elif ${_XLIBRE_CAT} == data
# Nothing at the moment.
#
#.  elif ${_XLIBRE_CAT} == driver

.  if ${_XLIBRE_CAT} == driver
.include "../../x11-servers/xlibre-server/Makefile.version"
MODULEDIR=lib/xorg/modules/xlibre-${XLIBRE_MJR_VER}
USE_XLIBRE+=	xlibre-server
USE_XORG+=	xi xorgproto
CFLAGS+=	-Werror=uninitialized
PLIST_SUB+=	MODULEDIR=${MODULEDIR}
.    if ${_XLIBRE_BUILDSYS} == meson
# Put special stuff for meson here
.    else
CONFIGURE_ENV+=	PKG_CONFIG_PATH=${PREFIX}/libdata/pkgconfig/ \
		DRIVER_MAN_SUFFIX=4x DRIVER_MAN_DIR='$$(mandir)/man4'
AUTORECONF_ARGS+= -I ${PREFIX}/share/aclocal
libtool_ARGS?=	# empty
.include "${USESDIR}/libtool.mk"
INSTALL_TARGET=	install-strip
.    endif

.  elif ${_XLIBRE_CAT} == server
# For common flags across servers.

# XLibre does not (yet) host any category other than drivers and the server so
# there is no need to check for them.

#.  elif ${_XLIBRE_CAT} == font
#FONTNAME?=	${PORTNAME:C/.*-//g:S/type/Type/:S/ttf/TTF/:S/speedo/Speedo/}
#.    if ${_XLIBRE_BUILDSYS} == meson
# Put special stuff for meson here
#.    else
#CONFIGURE_ARGS+=	--with-fontrootdir=${PREFIX}/share/fonts
#CONFIGURE_ENV+=	FONTROOTDIR=${PREFIX}/share/fonts
#.    endif
#.    if !defined(NOFONT)
#.include "${USESDIR}/fonts.mk"
#BUILD_DEPENDS+=	mkfontscale>=0:x11-fonts/mkfontscale \
#		bdftopcf:x11-fonts/bdftopcf
#PLIST_FILES+=	"@comment ${FONTSDIR}/fonts.dir" \
#		"@comment ${FONTSDIR}/fonts.scale"
#.    endif
#
#.  elif ${_XLIBRE_CAT} == lib
#CFLAGS+=	-Werror=uninitialized
#.include "${USESDIR}/pathfix.mk"
#.    if ${_XLIBRE_BUILDSYS} == meson
# put meson stuff here
#.    else
#libtool_ARGS?=	# empty
#.include "${USESDIR}/libtool.mk"
#USE_LDCONFIG=	yes
#CONFIGURE_ARGS+=--enable-malloc0returnsnull
#.    endif
#
#.  elif ${_XLIBRE_CAT} == proto
#.include "${USESDIR}/pathfix.mk"
#

.  endif # ${_XLIBRE_CAT} == <category>

# We only need to include xorg.mk if we want USE_XORG modules
# USES+=xorg does not provide any functionality, it just silences an error
# message about USES=xorg not being set
.  if defined(USE_XORG) && !empty(USE_XORG)
USES+=		xorg
.include "${USESDIR}/xorg.mk"
.  endif

.  if defined(USE_XLIBRE) && !empty(USE_XLIBRE)
USES+=		xlibre
.include "${USESDIR}/xlibre.mk"
.  endif

.endif