# SCCS-info %W% %E%
#
# /*--------------------------------------------------------------------*/
# /*                                                                    */
# /*              VCG : Visualization of Compiler Graphs                */
# /*              --------------------------------------                */
# /*                                                                    */
# /*   file:         tMakefile.tpl                                      */
# /*   version:      1.00.00                                            */
# /*   creation:     1.4.1993                                           */
# /*   author:       I. Lemke  (...-Version 0.99.99)                    */
# /*                 G. Sander (Version 1.00.00-...)                    */
# /*                 Universitaet des Saarlandes, W-66041 Saarbruecken  */
# /*                 ESPRIT Project #5399 Compare                       */
# /*   description:  Top level Makefile                                 */
# /*   status:       in work                                            */
# /*                                                                    */
# /*--------------------------------------------------------------------*/
#
# $Log: tMakefile,v $
# Revision 1.1.1.1  1995/02/19 09:25:45  hsu
# vcg - a visualization tool for compiler graphs
#
# Submitted by:	Philippe Charnier <charnier@lirmm.fr>
#
#

#========================= CHANGE AREA =========================

# Please update the change area according to your system.
# NOTE: you must also adapt the file src/globals.h and demo/demo.csh
# accordingly.

SHELL = /bin/sh

# where the binaries go
# BINDIR = /usr/local/bin/
# BINDIR = /RW/esprit/users/sander/PUBLIC/CMD/
BINDIR = %%PREFIX%%/bin

# where the manual pages go
# MANDIR = /usr/local/man/manl/
# MANDIR = /RW/esprit/users/sander/PUBLIC/MAN/
MANDIR = %%PREFIX%%/share/man/manl

# what the manual extension is
MANEXT = l

# how the VCG tool should be called
# For the Sunview version I use the name vcg.
# For the X11 version I prefer the name xvcg.
# VCGTOOL = vcg
# VCGTOOL = xvcg
VCGTOOL = xvcg

# Note: you can test the tool before it is installed.
# Thus we need the path of the tool for the tests.
# It may also be the path of the tool after installation.
# Then use
VCGCALL   = $(BINDIR)/$(VCGTOOL)
#
# Used during the demoanimations:
# where the vcg is during the tests.
# Please enter the absolute path to the VCG-tool.
# VCGCALL   = /usr/local/bin/vcg
# VCGCALL  = /RW/esprit/users/sander/PUBLIC/CMD/$(VCGTOOL)

#-------------------------- Flags ------------------------------

# Flags for the C compiler
# Important: Do not use -Dlint with gcc. This causes confusion
# during linking (!!!), e.g. some undefined messages.
#CFLAGS   = -O -finline-functions
#CFLAGS   = -O -finline-functions -DDRAWLIB_TOO_LARGE
#CFLAGS   = -g -finline-functions  -Wall
#
# Do not use  -O -finline-functions for FreeBSD, or you really have a lot
# of swap for compiling drawstr.c.
CFLAGS = -c %%CFLAGS%%

# Flags for debugging
DFLAGS =

# Flags for the C linker
#CLINKFLAGS = -Bstatic -o
CLINKFLAGS = -o

# Include directories
# If you use gcc, it may happen that not all ANSI header files
# are on the right place. Example: we often have problems to
# find stdarg.h. Look for this file and add the directory here,
# e.g.:
# INCLUDES = /usr/local/include/gnuansi/
#
# For Sunview, this should be enough, because on Suns, Sunview
# is normally installed in standard directories:
# INCLUDES =
#
# For X11, it depends where it is installed. Look for Xlib.h,
# Xproto.h or Xutil.h.
# For instance, if you find /usr/local/X11/include/X11/Xlib.h
# then please use
# INCLUDES = -I/usr/local/X11/include/
# INCLUDES = -I/RW/esprit/X11R5/include/
INCLUDES = -I%%LOCALBASE%%/include/

# Library directories
# For Sunview, this should be enough, because on Suns, Sunview
# is normally installed in standard directories:
# LIBPATH =
#
# For X11, it depends where it is installed. Look for libX.a,
# or libX11.so.<version_number>, or libXext.a, etc.
# For instance, if you find /usr/local/X11/lib/libX11.a
# then please use
# LIBPATH = -L/usr/local/X11/lib/
# LIBPATH = -L/RW/esprit/X11R5/lib/
LIBPATH = -L%%LOCALBASE%%/lib/

# Libraries
# Libraries for SunView
# LIBRARIES = -lsuntool -lsunwindow -lpixrect -lm
#
# Libraries for X11
# LIBRARIES = -lXext -lX11 -lm
LIBRARIES = -lXext -lX11 -lm

#-------------------------- Tools ------------------------------

# C compiler
# CC = gcc -pipe
CC = %%CC%%

# C linker
# CCLINK  = gcc -static
CCLINK = %%CC%%

# If you use gcc and the sun driver, you need the normal sun
# preprocessor because of incompatibilities of the system libraries
CPP     = $(CC) -E

# If you dont need a special preprocessor, change the .c.o rule or
# define this:
#CPP    = cat

# Install software. You can use /bin/cp instead of /bin/install.
# I prefer that binaries are stripped.
# For directories:
# INSTALLDIR = /bin/install -d -m 755
INSTALLDIR = /bin/mkdir -p

# For binary files:
# Assume that you want to install s file called dummy.
# INSTALL = /bin/install -s -m 755 dummy $(BINDIR)/dummy
INSTALL = %%INSTALL_PROGRAM%% dummy $(BINDIR)/dummy

# For manual pages:
# Assume that you want to install s file called dummy.
# INSTALLMAN = /bin/install -m 644 dummy $(MANDIR)/dummy
INSTALLMAN = %%INSTALL_MAN%% dummy $(MANDIR)/dummy

# To make the documentation
LATEX = latex

# To make the short documentation using big-latex
BIGLATEX = not_available

# For the pictures, we need some transfig-tools.
# If the files doc/foldpath.tex, doc/foldpath.ps,
# doc/foldtree.tex, doc/foldtree.ps, doc/hideedge.tex,
# doc/hideedge.ps, doc/window.tex, doc/window.ps
# are available, we do not need this.
#
TRANSFIGTEX = fig2ps2tex
TRANSFIGPS  = fig2dev


# The tools CHECKOUT, CHECKEDIT and CHECKIN are not needed unless
# you want to develop, change or maintain the VCG tool sources
# under control of RCS.

# RCS check out shellscript (normally not needed)
CHECKOUT = co

# RCS check edit shellscript (normally not needed)
CHECKEDIT = ce

# RCS check in shellscript (normally not needed)
CHECKIN  = ci

# parser pregenerator. If the files src/grammar.y and src/grammar.l
# are available, you don't need this.
PARSEGEN = parsegen

# lex-compatible scanner generator
LEX     = not_needed

# yacc-compatible parser generator. Currently, it does not work
# with yacc because some bison features are used directly.
YACC     = not_needed

# Make
# MAKE     = make
MAKE = %%MAKE%%

# MakeDepend (should understand the -f option)
# DEPEND   = makedepend
DEPEND = makedepend

# Streameditor
# SED = /bin/sed
SED = /usr/bin/sed

# Move File
# MV       = /bin/mv
MV = /bin/mv

# Link Files (or Copy them)
# LN       = /bin/ln -s
LN = /bin/ln

# Remove File
# RM       = /bin/rm
RM = /bin/rm

# Change directory
CD       = cd

# Touch file
# TOUCH    = touch
TOUCH = /usr/bin/touch

#==================== END OF CHANGE AREA ======================

#-------------------------- Files ------------------------------

# Directories
DIRECTORIES = src man demo doc expl

# The tarfiles of subdirectories, to make a distribution
SUBTARFILES = src/vcg.tar man/manpages.tar demo/demo.tar doc/doc.tar \
	      expl/expl.tar

# These files are generated, but included into a distribution.
# They are in the directory preconf.

GEN_DISTFILES = tMakefile src/globals.h demo/demo.csh


# Directories where we have something to make
MAKEDIRS = src demo man doc

# Directories where we have something to install
INSTDIRS = src demo man doc

#-------------------------- Rules ------------------------------

MAKEARGUS = \
	SHELL="$(SHELL)" \
	BINDIR="$(BINDIR)" \
	MANDIR="$(MANDIR)" \
	MANEXT="$(MANEXT)" \
	VCGTOOL="$(VCGTOOL)" \
	VCGCALL="$(VCGCALL)" \
	CFLAGS="$(CFLAGS)" \
	CLINKFLAGS="$(CLINKFLAGS)" \
	DFLAGS="$(DFLAGS)" \
	INCLUDES="$(INCLUDES)" \
	LIBPATH="$(LIBPATH)" \
	LIBRARIES="$(LIBRARIES)" \
	CC="$(CC)" \
	CCLINK="$(CCLINK)" \
	CPP="$(CPP)" \
	LATEX="$(LATEX)" \
	BIGLATEX="$(BIGLATEX)" \
	TRANSFIGTEX="$(TRANSFIGTEX)" \
	TRANSFIGPS="$(TRANSFIGPS)"   \
	INSTALLDIR="$(INSTALLDIR)"   \
	INSTALL="$(INSTALL)"         \
	INSTALLMAN="$(INSTALLMAN)"   \
	CHECKOUT="$(CHECKOUT)" \
	CHECKEDIT="$(CHECKEDIT)" \
	CHECKIN="$(CHECKIN)" \
	PARSEGEN="$(PARSEGEN)" \
	LEX="$(LEX)" \
	YACC="$(YACC)" \
	MAKE="$(MAKE)" \
	DEPEND="$(DEPEND)" \
	SED="$(SED)" \
	MV="$(MV)" \
	LN="$(LN)" \
	RM="$(RM)" \
	CD="$(CD)" \
	TOUCH="$(TOUCH)"

all: stamp-src stamp-demo stamp-doc stamp-shortdoc

stamp-src: src
	($(CD) src; $(MAKE) $(MAKEARGUS))
	$(TOUCH) stamp-src	

stamp-demo: demo
	($(CD) demo; $(MAKE) $(MAKEARGUS))
	$(TOUCH) stamp-demo

stamp-doc: doc
	($(CD) doc; $(MAKE) $(MAKEARGUS))
	$(TOUCH) stamp-doc

stamp-shortdoc: doc
	($(CD) doc; $(MAKE) $(MAKEARGUS) short)
	$(TOUCH) stamp-shortdoc

demonstration: test

documentation: doc

shortdocu: stamp-shortdoc

install: stamp-src stamp-demo
	for i in $(INSTDIRS) ;\
	do \
	($(CD) $$i; $(MAKE) $(MAKEARGUS) install); \
	done

test: 	stamp-src stamp-demo
	($(CD) demo; csh demo.csh);

clean:
	for i in $(MAKEDIRS) ;\
	do \
	($(CD) $$i; $(MAKE) RM="$(RM)" clean); \
	done
	$(RM) -f stamp-* core

veryclean:
	for i in $(MAKEDIRS) ;\
	do \
	($(CD) $$i; $(MAKE) RM="$(RM)" veryclean); \
	done
	$(RM) -f stamp-* core

targetclean:
	for i in $(MAKEDIRS) ;\
	do \
	($(CD) $$i; $(MAKE) RM="$(RM)" targetclean); \
	done
	$(RM) -f stamp-* core

distclean:
	for i in $(MAKEDIRS) ;\
	do \
	($(CD) $$i; $(MAKE) RM="$(RM)" distclean); \
	done
	$(RM) -f stamp-* core

depend:
	for i in $(MAKEDIRS) ;\
	do \
	($(CD) $$i; $(MAKE) $(MAKEARGUS) depend); \
	done

tar: tMakefile Makefile $(DIRECTORIES)
	for i in $(DIRECTORIES) ;\
	do \
	($(CD) $$i; $(MAKE) $(MAKEARGUS) dist); \
	done
	tar -cf vcgcomplete.tar README README.SYS COPYING \
		 demotrue config tMakefile.tpl Makefile preconf $(SUBTARFILES)


dist: tar

# DO NOT DELETE THIS LINE -- make depend depends on it.