.\"
.\" Copyright (c) 2024 Michael Gmelin
.\"
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE DEVELOPERS BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.Dd May 28, 2024
.Dt PAPERLESS-NGX 7
.Os
.Sh NAME
.Nm paperless-ngx
.Nd Index and archive scanned paper documents - installation
.Sh SYNOPSIS
.Nm pkg install %%PKGBASE%%
.Sh DESCRIPTION
.Em Paperless-ngx
is a Django-based document management system that transforms
physical documents into a searchable online archive.
It is the successor of the original Paperless and Paperless-ng projects.
.Pp
It consists of multiple parts, a web UI and a couple of backend
services for consuming and processing documents.
.Pp
This man page documents how the
.Fx
port is installed and configured.
It assumes that the paperless-ngx package was already installed, e.g., from the
.Fx
package repo as described in
.Sx SYNOPSIS .
.Pp
.Em IMPORTANT :
Please note that upgrading an existing installation of
deskutils/paperless needs special precautions.
See
.Sx UPGRADING FROM PAPERLESS
for how to approach that.
.Pp
For more information about using paperless-ngx, see
the official paperless-ngx documentation
.Pa ( https://docs.paperless-ngx.com ) .
.Pp
The package creates a wrapper
.Pa %%PREFIX%%/bin/paperless
which in turn calls
.Pa %%PYTHONPREFIX_SITELIBDIR%%/paperless/manage.py ,
so whenever the official documentation mentions
.Em manage.py
it should be substituted with
.Pa %%PREFIX%%/bin/paperless
or simply
.Pa paperless .
.Pp
.Em Paperless-ngx always needs to be run using the correct system user
and a UTF-8 codepage.
.Pp
The package %%PKGBASE%% created a user
.Em paperless
with the following home directory layout, setting appropriate
restrictive access permissions:
.Bl -tag -width "/var"
.It Pa /var/db/paperless
home directory (only writeable by root)
.Bl -tag -width "consume/" -compact
.It Pa consume/
Consume directory writable by root, used as chroot directory
for sftp access (see below).
.Bl -tag -width "123" -compact
.It Pa input/
Input files are dropped in there to be processed by the
paperless document consumer - either directly or via
a mechanism like sftp.
.El
.It Pa data/
Contains paperless-ngx's data, including its SQLite database
unless an external database like PostgreSQL or MariaDB is used.
.Bl -tag -width "123" -compact
.It Pa log/
This is where paperless stored its log files
(on top of what the services write to syslog).
.El
.It Pa media/
Directory used by paperless-ngx to store original files and
thumbnails.
.It Pa nltkdata/
Directory containing data used for natural language processing.
.El
.El
.Sh BACKEND SETUP
Paperless needs access to a running redis instance, which can be
installed locally:
.Bd -literal -offset indent
pkg install redis
service redis enable
service redis start
.Ed
.Pp
Modify
.Pa %%PREFIX%%/etc/paperless.conf
to match the configured credentials (when running on localhost,
it is possible to use no special credentials).
.Pp
In case redis is not running on localhost, an ACL entry needs to
be added to grant permissions to the user used to access the instance:
.Bd -literal -offset indent
user paperlessusername on +@all -@admin ~* &*
.Ed
.Pp
The URL paperless is hosted on needs to be configued by setting
.Va PAPERLESS_URL ,
it is also possible to tune
.Va PAPERLESS_THREADS_PER_WORKER
in the same configuration file to limit the impact on system
performance.
.Pp
Now, the database needs to be initialized.
This can be accomplished by running
.Bd -literal -offset indent
service paperless-migrate onestart
.Ed
.Pp
In case database migrations should be applied on every
system start, paperless-migrate can be enabled to run on boot:
.Bd -literal -offset indent
service paperless-migrate enable
.Ed
.Pp
Next, mandatory backend services are enabled
.Bd -literal -offset indent
service paperless-beat enable
service paperless-consumer enable
service paperless-webui enable
service paperless-worker enable
.Ed
.Pp
and subsequently started
.Bd -literal -offset indent
service paperless-beat start
service paperless-consumer start
service paperless-webui start
service paperless-worker start
.Ed
.Sh NLTK DATA
In order to process scanned documents using machine learning,
paperless-ngx requires NLTK (natural language toolkit) data.
The required files can be downloaded by using these commands:
.Bd -literal -offset indent
su -l paperless -c '%%PYTHON_CMD%% -m nltk.downloader \\
  stopwords snowball_data punkt -d /var/db/paperless/nltkdata'
.Ed
.Pp
Normally, the document classifier is run automatically by
Celery, but it can also be initiated manually by calling
.Bd -literal -offset indent
su -l paperless \\
   -c '%%PREFIX%%/bin/paperless document_create_classifier'
.Ed
.Sh OPTIONAL FLOWER SERVICE
paperless-ngx makes use of Celery to control a cluster of workers.
There is a component called flower which can be enabled optionally
to monitor the cluster.
It can be enabled and started like this:
.Bd -literal -offset indent
service paperless-flower enable
service paperless-flower start
.Ed
.Sh JBIG2 ENCODING
In case a binary named `jbig2enc' is found in $PATH, textproc/py-ocrmypdf
will automatically pick it up to encode PDFs with it.
.Pp
A patch to add a port skeleton for jbig2enc for manual building
on a local ports tree can be found here:
.Pa https://people.freebsd.org/~grembo/graphics-jbig2enc.patch
.Pp
There are various considerations to be made when using jbig2enc,
including potential patent claims and regulatory requirements,
see also
.Pa https://en.wikipedia.org/wiki/JBIG2 .
.Sh WEB UI SETUP
Before using the web ui, make sure to create a super user and assign
a password
.Bd -literal -offset indent
su -l paperless -c '%%PREFIX%%/bin/paperless createsuperuser'
.Ed
.Pp
It is recommended to host the web component using a real
web server, e.g., nginx:
.Bd -literal -offset indent
pkg install nginx
.Ed
.Pp
Copy-in basic server configuration:
.Bd -literal -offset indent
cp %%EXAMPLESDIR%%/nginx.conf \\
   %%PREFIX%%/etc/nginx/nginx.conf
.Ed
.Pp
This server configuration contains TLS certificates, which
need to be created by the administrator.
See below for an example of how to create a self-signed
certificate to get started:
.Bd -literal -offset indent
openssl req -x509 -nodes -days 365 -newkey rsa:4096 \\
  -keyout %%PREFIX%%/etc/nginx/selfsigned.key \\
  -out %%PREFIX%%/etc/nginx/selfsigned.crt
.Ed
.Pp
Enable and start nginx:
.Bd -literal -offset indent
service nginx enable
service nginx start
.Ed
.Pp
The default nginx.conf can be adapted by the administrator to their
needs.
In case the optional flower service was enabled earlier, the commented
out block in the example file can be uncommented to make flower available
at /flower.
.Pp
.Em \&It is important to properly secure a public facing web server.
.Em Doing this properly is up to the administrator.
.Sh SETUP WITHOUT A WEB SERVER
Even though
.Em not
recommended, it is also possible to configure paperless to serve static
artifacts directly.
To do so, set
.Va PAPERLESS_STATICDIR=%%WWWDIR%%/static
in
.Pa %%PREFIX%%/etc/paperless.conf .
.Sh SFTP SETUP
Setting up
.Em sftp
enabled direct upload of files to be processed by the paperless
consumer.
Some scanners allow configuring sftp with key based authentication,
which is convenient as it scans directly to the paperless processing
pipeline.
.Pp
In case paperless is using a dedicated instance of
.Xr sshd 8 ,
access can be limited to the paperless user by adding
these lines to
.Pa /etc/ssh/sshd_config :
.Bd -literal -offset indent
# Only include if sshd is dedicated to paperless
# otherwise you'll lock yourself out
AllowUsers paperless
.Ed
.Pp
The following block limits the paperless user to using the
.Xr sftp 1
protocol and locks it into the consume directory:
.Bd -literal -offset indent
# paperless can only do sftp and is dropped into correct directory
Match User paperless
	ChrootDirectory %h/consume
	ForceCommand internal-sftp -u 0077 -d /input
	AllowTcpForwarding no
	X11Forwarding no
	PasswordAuthentication no
.Ed
.Pp
The public keys of authorized users/devices need to be added to
.Pa /var/db/paperless/.ssh/authorized_keys :
.Bd -literal -offset indent
mkdir -p /var/db/paperless/.ssh
cat path/to/pubkey >>/var/db/paperless/.ssh/authorized_keys
.Ed
.Pp
Make sure
.Xr sshd 8
is enabled and restart (or reload) it:
.Bd -literal -offset indent
service sshd enable
service sshd restart
.Ed
.Pp
The user will be dropped into the correct directory, so uploading
a file is as simple as:
.Bd -literal -offset indent
echo put file.pdf | sftp -b - paperless@host
.Ed
.Sh UPGRADING FROM PAPERLESS
In case deskutils/paperless is installed, follow the upgrading
guide at:
.Pa https://docs.paperless-ngx.com/setup/#migrating-from-paperless
.Pp
This guide is for a docker based installation, so here a few basic
hints for upgrading a
.Fx
based installation:
.Bl -bullet -compact
.It
There need to be good and working backups before migrating
.It
In case PGP encryption was used, files need to be decrypted first
by using the existing installation of deskutils/py-paperless.
See
.Pa https://github.com/the-paperless-project/paperless/issues/714
for a description on how to do this and potential pitfalls.
The basic idea is to comment out lines 95 and 96 in
.Pa change_storage_type.py
and then run:
.Bd -literal -offset indent
su -l paperless -c \\
  '%%PREFIX%%/bin/paperless change_storage_type gpg unencrypted'
.Ed
.Pp
.It
Deinstall py-paperless (it might be good to keep a backup of the
package).
.It
Move the old paperless configuration file out of the way before
installing paperless-ngx:
.Bd -literal -offset indent
mv %%PREFIX%%/etc/paperless.conf \\
   %%PREFIX%%/etc/paperless.conf.old
.Ed
.Pp
.It
Install paperless-ngx:
.Bd -literal -offset indent
pkg install %%PKGBASE%%
.Ed
.Pp
.It
Configure
.Pa %%PREFIX%%/etc/paperless.conf
as described above.
.It
Re-index documents:
.Bd -literal -offset indent
su -l paperless \\
   -c '%%PREFIX%%/bin/paperless document_index reindex'
.Ed
.Pp
.It
Check if documents are okay:
.Bd -literal -offset indent
su -l paperless \\
   -c '%%PREFIX%%/bin/paperless document_sanity_checker'
.Ed
.Pp
.It
In general, things should be expected to fail, so being able to
restore from backup is vital.
.El
.Sh FILES
.Bl -tag -width ".Pa %%PREFIX%%/etc/paperless.conf" -compact
.It Pa %%PREFIX%%/etc/paperless.conf
See
.Pa %%PREFIX%%/etc/paperless.conf.sample
for an example.
.It Pa %%EXAMPLESDIR%%
Configuration examples, complementary to this man page.
.El
.Sh SEE ALSO
.Xr sftp 1 ,
.Xr sshd_config 5 ,
.Xr ports 7 ,
.Xr daemon 8 ,
.Xr service 8
.Pp
.Pa https://docs.paperless-nginx.com
.Sh AUTHORS
.An -nosplit
This manual page was written by
.An Michael Gmelin Aq Mt grembo@FreeBSD.org .