-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 ============================================================================= FreeBSD-EN-23:07.mpr Errata Notice The FreeBSD Project Topic: mpr(4) may fail to initialize devices Category: core Module: mpr Announced: 2023-06-21 Affects: All supported versions of FreeBSD. Corrected: 2023-05-02 12:21:35 UTC (stable/13, 13.2-STABLE) 2023-06-21 05:06:39 UTC (releng/13.2, 13.2-RELEASE-p1) 2023-06-21 05:07:50 UTC (releng/13.1, 13.1-RELEASE-p8) 2023-05-02 12:21:26 UTC (stable/12, 12.4-STABLE) 2023-06-21 05:43:37 UTC (releng/12.4, 12.4-RELEASE-p3) I. Background mpr(4) is a driver for Broadcom SAS controllers. II. Problem Description The mpr(4) driver did not correctly initialize command data sent to the controller when attaching. III. Impact mpr(4) would fail to initialize the controller in some cases, making the attached storage devices inaccessible. IV. Workaround No workaround is available. V. Solution Upgrade your system to a supported FreeBSD stable or release / security branch (releng) dated after the correction date and reboot. Perform one of the following: 1) To update your system via a binary patch: Systems running a RELEASE version of FreeBSD on the amd64, i386, or (on FreeBSD 13 and later) arm64 platforms can be updated via the freebsd-update(8) utility: # freebsd-update fetch # freebsd-update install # shutdown -r +10min "Rebooting for an erratum update" 2) To update your system via a source code patch: The following patches have been verified to apply to the applicable FreeBSD release branches. a) Download the relevant patch from the location below, and verify the detached PGP signature using your PGP utility. # fetch https://security.FreeBSD.org/patches/EN-23:07/mpr.patch # fetch https://security.FreeBSD.org/patches/EN-23:07/mpr.patch.asc # gpg --verify mpr.patch.asc b) Apply the patch. Execute the following commands as root: # cd /usr/src # patch < /path/to/patch c) Recompile your kernel as described in and reboot the system. VI. Correction details This issue is corrected by the corresponding Git commit hash or Subversion revision number in the following stable and release branches: Branch/path Hash Revision - ------------------------------------------------------------------------- stable/13/ e7a3a08febd0 stable/13-n255252 releng/13.2/ e63d8b8fa6d9 releng/13.2-n254619 releng/13.1/ bc61a15ededc releng/13.1-n250185 stable/12/ r373058 releng/12.4/ r373102 - ------------------------------------------------------------------------- For FreeBSD 13 and later: Run the following command to see which files were modified by a particular commit: # git show --stat Or visit the following URL, replacing NNNNNN with the hash: To determine the commit count in a working tree (for comparison against nNNNNNN in the table above), run: # git rev-list --count --first-parent HEAD For FreeBSD 12 and earlier: Run the following command to see which files were modified by a particular revision, replacing NNNNNN with the revision number: # svn diff -cNNNNNN --summarize svn://svn.freebsd.org/base Or visit the following URL, replacing NNNNNN with the revision number: VII. References The latest revision of this advisory is available at -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEthUnfoEIffdcgYM7bljekB8AGu8FAmSSkjsACgkQbljekB8A Gu/jiw/9HCji9U0ygORSvETbwBg9eBNJNtQTqqnAEKPv7kjBUYhYkKwqyyzzaoCF 7rj0dw3heObLTdsDhDynnLinmTN1htXAoVE4F4RpS7li44eUnVp2hDSr//ft/bxR Zrd0NbxDt9OCuPVPxWclVyAnG+fi446pwpX5zBMz1U8STQHDe7N8DRUlzOmCxY1z N3pEJdFoYt8zUUixymBdpAmXyvBL5FAi9yvm0dt20Dl1e8EKVkdT+38x6RhYgjkO Cr//HnldHyoVXnIzqOIIv+VpEwAV4nYcKei9EvI8bJ/LSWUIk+7PHzzpmygk7fPM HFyIIlNQbkL0/KsEi/I07LUIBVoFEeB2pRHuOfF5jYhc6J4zcZ2pGX8BY3Ai8gdn hRAVvUHbiKKIFjezwl4S+8N+jipP8xIovEW5LG4MTp8BSpq0aNy1VtXYLyTvZhEb XhrepXUnPjh85sD2gLTfM4JDqCyuaNFTKqi0w+vCunvXjCfDhAFC+ttzJvDeijKG cuW2nF2Iniug3Y7BjGIe4xWYFEBiDTp+vOYOg/J4Me4cd1+BJzD4Enmu60dmtCd3 6u4HceA/CjVEV1iuZZXty9RkSqA5S6xCinZihho1fLrYLUOBA7MvSkIgZl1VH+RD XkgQtO3LyurJ2Hi7O7LIcG9IOI5XmpNH0i2S3i7BOcQvMdTjamY= =/a3j -----END PGP SIGNATURE-----