-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
=============================================================================
FreeBSD-EN-16:12.hv_storvsc Errata Notice
The FreeBSD Project
Topic: Enable INQUIRY result check only on Windows 10 host systems
Category: core
Module: hv_storvsc
Announced: 2016-08-12
Credits: Microsoft OSTC
Affects: FreeBSD 10.3
Corrected: 2016-05-25 06:15:26 UTC (stable/10, 10.3-STABLE)
2016-08-12 04:01:16 UTC (releng/10.3, 10.3-RELEASE-p7)
For general information regarding FreeBSD Errata Notices and Security
Advisories, including descriptions of the fields above, security
branches, and the following sections, please visit
.
I. Background
A FreeBSD virtual machine running on Hyper-V uses hv_storvsc(4) to discover,
access, and control block devices. The SCSI INQUIRY command is used to scan
the disks attached to the virtual machine, and hv_storvsc(4) checks if the
response from the host is valid.
II. Problem Description
On Windows 8 and earlier systems, the response to the INQUIRY command may
return invalid results.
III. Impact
When a SCSI disk hotplug occurs, some disks may not be visible to the guest
virtual machine despite being present.
IV. Workaround
No workaround is available however guest machines not running on Hyper-V on
Windows 8 and earlier are unaffected.
V. Solution
Perform one of the following:
1) Upgrade your system to a supported FreeBSD stable or release / security
branch (releng) dated after the correction date. After which, reboot the
system.
2) To update your system via a binary patch:
Systems running a RELEASE version of FreeBSD on the i386 or amd64
platforms can be updated via the freebsd-update(8) utility:
# freebsd-update fetch
# freebsd-update install
After which, reboot the system.
3) To update your system via a source code patch:
The following patches have been verified to apply to the applicable
FreeBSD release branches.
a) Download the relevant patch from the location below, and verify the
detached PGP signature using your PGP utility.
# fetch https://security.FreeBSD.org/patches/EN-16:12/hv_storvsc.patch
# fetch https://security.FreeBSD.org/patches/EN-16:12/hv_storvsc.patch.asc
# gpg --verify hv_storvsc.patch.asc
b) Apply the patch. Execute the following commands as root:
# cd /usr/src
# patch < /path/to/patch
c) Recompile your kernel as described in
and reboot the
system.
VI. Correction details
The following list contains the correction revision numbers for each
affected branch.
Branch/path Revision
- -------------------------------------------------------------------------
stable/10/ r300656
releng/10.3/ r303984
- -------------------------------------------------------------------------
To see which files were modified by a particular revision, run the
following command, replacing NNNNNN with the revision number, on a
machine with Subversion installed:
# svn diff -cNNNNNN --summarize svn://svn.freebsd.org/base
Or visit the following URL, replacing NNNNNN with the revision number:
VII. References
The latest revision of this advisory is available at
-----BEGIN PGP SIGNATURE-----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=FUf1
-----END PGP SIGNATURE-----