---
title: "FreeBSD/i386 6.0-RELEASE Hardware Notes"
sidenav: download
---

++++


<h3 class="CORPAUTHOR">The FreeBSD Documentation Project</h3>

<p class="COPYRIGHT">Copyright &copy; 2000, 2001, 2002, 2003, 2004, 2005 The FreeBSD
Documentation Project</p>

<hr />
</div>

<div class="TOC">
<dl>
<dt><b>Table of Contents</b></dt>

<dt>1 <a href="#INTRO">Introduction</a></dt>

<dt>2 <a href="#PROC">Supported Processors and Motherboards</a></dt>

<dt>3 <a href="#SUPPORT">Supported Devices</a></dt>

<dd>
<dl>
<dt>3.1 <a href="#DISK">Disk Controllers</a></dt>

<dt>3.2 <a href="#ETHERNET">Ethernet Interfaces</a></dt>

<dt>3.3 <a href="#TOKENRING">Token Ring Interfaces</a></dt>

<dt>3.4 <a href="#FDDI">FDDI Interfaces</a></dt>

<dt>3.5 <a href="#ATM">ATM Interfaces</a></dt>

<dt>3.6 <a href="#WLAN">Wireless Network Interfaces</a></dt>

<dt>3.7 <a href="#MISC-NETWORK">Miscellaneous Networks</a></dt>

<dt>3.8 <a href="#ISDN">ISDN Interfaces</a></dt>

<dt>3.9 <a href="#SERIAL">Serial Interfaces</a></dt>

<dt>3.10 <a href="#SOUND">Sound Devices</a></dt>

<dt>3.11 <a href="#CAMERA">Camera and Video Capture Devices</a></dt>

<dt>3.12 <a href="#USB">USB Devices</a></dt>

<dt>3.13 <a href="#FIREWIRE">IEEE 1394 (Firewire) Devices</a></dt>

<dt>3.14 <a href="#BLUETOOTH">Bluetooth Devices</a></dt>

<dt>3.15 <a href="#CRYPTO-ACCEL">Cryptographic Accelerators</a></dt>

<dt>3.16 <a href="#MISC">Miscellaneous</a></dt>
</dl>
</dd>
</dl>
</div>

<div class="SECT1">
<h2 class="SECT1"><a id="INTRO" name="INTRO">1 Introduction</a></h2>

<p>This document contains the hardware compatibility notes for FreeBSD 6.0-RELEASE on the
i386 hardware platform (also referred to as FreeBSD/i386 6.0-RELEASE). It lists devices
known to work on this platform, as well as some notes on boot-time kernel customization
that may be useful when attempting to configure support for new devices.</p>

<div class="NOTE">
<blockquote class="NOTE">
<p><b>Note:</b> This document includes information specific to the i386 hardware
platform. Versions of the hardware compatibility notes for other architectures will
differ in some details.</p>
</blockquote>
</div>
</div>

<div class="SECT1">
<hr />
<h2 class="SECT1"><a id="PROC" name="PROC">2 Supported Processors and
Motherboards</a></h2>

<p>FreeBSD/i386 runs on a wide variety of &#8220;IBM PC compatible&#8221; machines. Due
to the wide range of hardware available for this architecture, it is impossible to
exhaustively list all combinations of equipment supported by FreeBSD. Nevertheless, some
general guidelines are presented here.</p>

<p>Almost all i386-compatible processors with a floating point unit are supported. All
Intel processors beginning with the 80486 are supported, including the 80486, Pentium,
Pentium Pro, Pentium II, Pentium III, Pentium 4, and variants thereof, such as the Xeon
and Celeron processors. All i386-compatible AMD processors are also supported, including
the Am486, Am5x86, K5, K6 (and variants), Athlon (including Athlon-MP, Athlon-XP,
Athlon-4, and Athlon Thunderbird), and Duron processors. The AMD &Eacute;lan SC520
embedded processor is supported. The Transmeta Crusoe is recognized and supported, as are
i386-compatible processors from Cyrix and NexGen.</p>

<p>There is a wide variety of motherboards available for this architecture. Motherboards
using the ISA, VLB, EISA, AGP, and PCI expansion busses are well-supported. There is some
limited support for the MCA (&#8220;MicroChannel&#8221;) expansion bus used in the IBM
PS/2 line of PCs.</p>

<p>Symmetric multi-processor (SMP) systems are generally supported by FreeBSD, although
in some cases, BIOS or motherboard bugs may generate some problems. Perusal of the
archives of the <a href="http://lists.FreeBSD.org/mailman/listinfo/freebsd-smp"
target="_top">FreeBSD symmetric multiprocessing mailing list</a> may yield some
clues.</p>

<p>FreeBSD will take advantage of HyperThreading (HTT) support on Intel CPUs that support
this feature. A kernel with the <tt class="LITERAL">options&nbsp;SMP</tt> feature enabled
will automatically detect the additional logical processors. The default FreeBSD
scheduler treats the logical processors the same as additional physical processors; in
other words, no attempt is made to optimize scheduling decisions given the shared
resources between logical processors within the same CPU. Because this naive scheduling
can result in suboptimal performance, under certain circumstances it may be useful to
disable the logical processors with the the <code
class="VARNAME">machdep.hlt_logical_cpus</code> sysctl variable. It is also possible to
halt any CPU in the idle loop with the <code class="VARNAME">machdep.hlt_cpus</code>
sysctl variable. The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=smp&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">smp</span>(4)</span></a> manual
page has more details.</p>

<p>FreeBSD will take advantage of Physical Address Extensions (PAE) support on CPUs that
support this feature. A kernel with the <tt class="LITERAL">PAE</tt> feature enabled will
detect memory above 4 gigabytes and allow it to be used by the system. This feature
places constraints on the device drivers and other features of FreeBSD which may be used;
consult the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=pae&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">pae</span>(4)</span></a> manpage
for more details.</p>

<p>FreeBSD will generally run on i386-based laptops, albeit with varying levels of
support for certain hardware features such as sound, graphics, power management, and
PCCARD expansion slots. These features tend to vary in idiosyncratic ways between
machines, and frequently require special-case support in FreeBSD to work around hardware
bugs or other oddities. When in doubt, a search of the archives of the <a
href="http://lists.FreeBSD.org/mailman/listinfo/freebsd-mobile" target="_top">FreeBSD
laptop computer mailing list</a> may be useful.</p>

<p>Most modern laptops (as well as many desktops) use the Advanced Configuration and
Power Management (ACPI) standard. FreeBSD supports ACPI via the ACPI Component
Architecture reference implementation from Intel, as described in the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=acpi&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">acpi</span>(4)</span></a> manual
page. The use of ACPI causes instabilities on some machines and it may be necessary to
disable the ACPI driver, which is normally loaded via a kernel module. This may be
accomplished by adding the following line to <tt
class="FILENAME">/boot/device.hints</tt>:</p>

<pre class="PROGRAMLISTING">
hint.acpi.0.disabled="1"
</pre>

<p>Users debugging ACPI-related problems may find it useful to disable portions of the
ACPI functionality. The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=acpi&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">acpi</span>(4)</span></a> manual
page has more information on how to do this via loader tunables.</p>

<p>ACPI depends on a Differentiated System Descriptor Table (DSDT) provided by each
machine's BIOS. Some machines have bad or incomplete DSDTs, which prevents ACPI from
functioning correctly. Replacement DSDTs for some machines can be found at the <a
href="http://acpi.sourceforge.net/dsdt/index.php" target="_top">DSDT</a> section of the
<a href="http://acpi.sourceforge.net/" target="_top">ACPI4Linux</a> project Web site.
FreeBSD can use these DSDTs to override the DSDT provided by the BIOS; see the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=acpi&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">acpi</span>(4)</span></a> manual
page for more information.</p>
</div>

<div class="SECT1">
<hr />
<h2 class="SECT1"><a id="SUPPORT" name="SUPPORT">3 Supported Devices</a></h2>

$FreeBSD: src/release/doc/en_US.ISO8859-1/hardware/common/dev.sgml,v 1.282.2.3 2005/09/24
10:46:38 brueffer Exp $

<p>This section describes the devices currently known to be supported by with FreeBSD on
the i386 platform. Other configurations may also work, but simply have not been tested
yet. Feedback, updates, and corrections to this list are encouraged.</p>

<p>Where possible, the drivers applicable to each device or class of devices is listed.
If the driver in question has a manual page in the FreeBSD base distribution (most
should), it is referenced here. Information on specific models of supported devices,
controllers, etc. can be found in the manual pages.</p>

<div class="NOTE">
<blockquote class="NOTE">
<p><b>Note:</b> The device lists in this document are being generated automatically from
FreeBSD manual pages. This means that some devices, which are supported by multiple
drivers, may appear multiple times.</p>
</blockquote>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="DISK" name="DISK">3.1 Disk Controllers</a></h3>

<p>IDE/ATA controllers (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ata&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ata</span>(4)</span></a>
driver)</p>

<p>Controllers supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=aac&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">aac</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Adaptec AAC-364</p>
</li>

<li>
<p>Adaptec SATA RAID 2410SA</p>
</li>

<li>
<p>Adaptec SATA RAID 2810SA</p>
</li>

<li>
<p>Adaptec SATA RAID 21610SA</p>
</li>

<li>
<p>Adaptec SCSI RAID 2120S</p>
</li>

<li>
<p>Adaptec SCSI RAID 2130S</p>
</li>

<li>
<p>Adaptec SCSI RAID 2200S</p>
</li>

<li>
<p>Adaptec SCSI RAID 2130SLP</p>
</li>

<li>
<p>Adaptec SCSI RAID 2230SLP</p>
</li>

<li>
<p>Adaptec SCSI RAID 5400S</p>
</li>

<li>
<p>Dell CERC SATA RAID 2</p>
</li>

<li>
<p>Dell PERC 2/Si</p>
</li>

<li>
<p>Dell PERC 2/QC</p>
</li>

<li>
<p>Dell PERC 3/Si</p>
</li>

<li>
<p>Dell PERC 3/Di</p>
</li>

<li>
<p>Dell PERC 320/DC</p>
</li>

<li>
<p>HP NetRAID 4M</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=adv&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">adv</span>(4)</span></a> driver
supports the following SCSI controllers:</p>

<ul>
<li>
<p>AdvanSys ABP510/5150</p>
</li>

<li>
<p>AdvanSys ABP5140</p>
</li>

<li>
<p>AdvanSys ABP5142</p>
</li>

<li>
<p>AdvanSys ABP902/3902</p>
</li>

<li>
<p>AdvanSys ABP3905</p>
</li>

<li>
<p>AdvanSys ABP915</p>
</li>

<li>
<p>AdvanSys ABP920</p>
</li>

<li>
<p>AdvanSys ABP3922</p>
</li>

<li>
<p>AdvanSys ABP3925</p>
</li>

<li>
<p>AdvanSys ABP930, ABP930U, ABP930UA</p>
</li>

<li>
<p>AdvanSys ABP960, ABP960U</p>
</li>

<li>
<p>AdvanSys ABP542</p>
</li>

<li>
<p>AdvanSys ABP742</p>
</li>

<li>
<p>AdvanSys ABP842</p>
</li>

<li>
<p>AdvanSys ABP940</p>
</li>

<li>
<p>AdvanSys ABP940UA/3940UA</p>
</li>

<li>
<p>AdvanSys ABP940U</p>
</li>

<li>
<p>AdvanSys ABP3960UA</p>
</li>

<li>
<p>AdvanSys ABP970, ABP970U</p>
</li>

<li>
<p>AdvanSys ABP752</p>
</li>

<li>
<p>AdvanSys ABP852</p>
</li>

<li>
<p>AdvanSys ABP950</p>
</li>

<li>
<p>AdvanSys ABP980, ABP980U</p>
</li>

<li>
<p>AdvanSys ABP980UA/3980UA</p>
</li>

<li>
<p>MELCO IFC-USP (PC-98)</p>
</li>

<li>
<p>RATOC REX-PCI30 (PC-98)</p>
</li>

<li>
<p>@Nifty FNECHARD IFC-USUP-TX (PC-98)</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=adw&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">adw</span>(4)</span></a> driver
supports SCSI controllers including:</p>

<ul>
<li>
<p>AdvanSys ABP940UW/ABP3940UW</p>
</li>

<li>
<p>AdvanSys ABP950UW</p>
</li>

<li>
<p>AdvanSys ABP970UW</p>
</li>

<li>
<p>AdvanSys ABP3940U2W</p>
</li>

<li>
<p>AdvanSys ABP3950U2W</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=aha&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">aha</span>(4)</span></a> driver
supports the following SCSI host adapters:</p>

<ul>
<li>
<p>Adaptec AHA-154xB</p>
</li>

<li>
<p>Adaptec AHA-154xC</p>
</li>

<li>
<p>Adaptec AHA-154xCF</p>
</li>

<li>
<p>Adaptec AHA-154xCP</p>
</li>

<li>
<p>Adaptec AHA-1640</p>
</li>

<li>
<p>Adaptec AHA-174x in 154x emulation mode</p>
</li>

<li>
<p>DTC 3290 SCSI controller in 1542 emulation mode</p>
</li>

<li>
<p>Tekram SCSI controllers in 154x emulation mode</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ahb&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ahb</span>(4)</span></a> driver
supports the following SCSI host adapters:</p>

<ul>
<li>
<p>Adaptec AHA-1740</p>
</li>

<li>
<p>Adaptec AHA-1742</p>
</li>

<li>
<p>Adaptec AHA-1740A</p>
</li>

<li>
<p>Adaptec AHA-1742A</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ahc&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ahc</span>(4)</span></a> driver
supports the following SCSI host adapter chips and SCSI controller cards:</p>

<ul>
<li>
<p>Adaptec AIC7770 host adapter chip</p>
</li>

<li>
<p>Adaptec AIC7850 host adapter chip</p>
</li>

<li>
<p>Adaptec AIC7860 host adapter chip</p>
</li>

<li>
<p>Adaptec AIC7870 host adapter chip</p>
</li>

<li>
<p>Adaptec AIC7880 host adapter chip</p>
</li>

<li>
<p>Adaptec AIC7890 host adapter chip</p>
</li>

<li>
<p>Adaptec AIC7891 host adapter chip</p>
</li>

<li>
<p>Adaptec AIC7892 host adapter chip</p>
</li>

<li>
<p>Adaptec AIC7895 host adapter chip</p>
</li>

<li>
<p>Adaptec AIC7896 host adapter chip</p>
</li>

<li>
<p>Adaptec AIC7897 host adapter chip</p>
</li>

<li>
<p>Adaptec AIC7899 host adapter chip</p>
</li>

<li>
<p>Adaptec 274X(W)</p>
</li>

<li>
<p>Adaptec 274X(T)</p>
</li>

<li>
<p>Adaptec 284X</p>
</li>

<li>
<p>Adaptec 2910</p>
</li>

<li>
<p>Adaptec 2915</p>
</li>

<li>
<p>Adaptec 2920</p>
</li>

<li>
<p>Adaptec 2930C</p>
</li>

<li>
<p>Adaptec 2930U2</p>
</li>

<li>
<p>Adaptec 2940</p>
</li>

<li>
<p>Adaptec 2940J</p>
</li>

<li>
<p>Adaptec 2940N</p>
</li>

<li>
<p>Adaptec 2940U</p>
</li>

<li>
<p>Adaptec 2940AU</p>
</li>

<li>
<p>Adaptec 2940UW</p>
</li>

<li>
<p>Adaptec 2940UW Dual</p>
</li>

<li>
<p>Adaptec 2940UW Pro</p>
</li>

<li>
<p>Adaptec 2940U2W</p>
</li>

<li>
<p>Adaptec 2940U2B</p>
</li>

<li>
<p>Adaptec 2950U2W</p>
</li>

<li>
<p>Adaptec 2950U2B</p>
</li>

<li>
<p>Adaptec 19160B</p>
</li>

<li>
<p>Adaptec 29160B</p>
</li>

<li>
<p>Adaptec 29160N</p>
</li>

<li>
<p>Adaptec 3940</p>
</li>

<li>
<p>Adaptec 3940U</p>
</li>

<li>
<p>Adaptec 3940AU</p>
</li>

<li>
<p>Adaptec 3940UW</p>
</li>

<li>
<p>Adaptec 3940AUW</p>
</li>

<li>
<p>Adaptec 3940U2W</p>
</li>

<li>
<p>Adaptec 3950U2</p>
</li>

<li>
<p>Adaptec 3960</p>
</li>

<li>
<p>Adaptec 39160</p>
</li>

<li>
<p>Adaptec 3985</p>
</li>

<li>
<p>Adaptec 4944UW</p>
</li>

<li>
<p>NEC PC-9821Xt13 (PC-98)</p>
</li>

<li>
<p>NEC RvII26 (PC-98)</p>
</li>

<li>
<p>NEC PC-9821X-B02L/B09 (PC-98)</p>
</li>

<li>
<p>NEC SV-98/2-B03 (PC-98)</p>
</li>

<li>
<p>Many motherboards with on-board SCSI support</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ahd&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ahd</span>(4)</span></a> driver
supports the following:</p>

<ul>
<li>
<p>Adaptec AIC7901 host adapter chip</p>
</li>

<li>
<p>Adaptec AIC7901A host adapter chip</p>
</li>

<li>
<p>Adaptec AIC7902 host adapter chip</p>
</li>

<li>
<p>Adaptec 29320 host adapter</p>
</li>

<li>
<p>Adaptec 39320 host adapter</p>
</li>

<li>
<p>Many motherboards with on-board SCSI support</p>
</li>
</ul>

<p>The adapters supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=aic&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">aic</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Adaptec AHA-1505 (ISA)</p>
</li>

<li>
<p>Adaptec AHA-1510A, AHA-1510B (ISA)</p>
</li>

<li>
<p>Adaptec AHA-1520A, AHA-1520B (ISA)</p>
</li>

<li>
<p>Adaptec AHA-1522A, AHA-1522B (ISA)</p>
</li>

<li>
<p>Adaptec AHA-1535 (ISA)</p>
</li>

<li>
<p>Creative Labs SoundBlaster SCSI host adapter (ISA)</p>
</li>

<li>
<p>Adaptec AHA-1460, AHA-1460B, AHA-1460C, AHA-1460D (PC Card)</p>
</li>

<li>
<p>Adaptec AHA-1030B, AHA-1030P (PC98)</p>
</li>

<li>
<p>NEC PC-9801-100 (PC98)</p>
</li>
</ul>

<p>Controllers supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=amd&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">amd</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>MELCO IFC-DP (PC-98)</p>
</li>

<li>
<p>Tekram DC390</p>
</li>

<li>
<p>Tekram DC390T</p>
</li>
</ul>

<p>Controllers supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=amr&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">amr</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>MegaRAID SCSI 320-1E</p>
</li>

<li>
<p>MegaRAID SCSI 320-2E</p>
</li>

<li>
<p>MegaRAID SCSI 320-4E</p>
</li>

<li>
<p>MegaRAID SCSI 320-0X</p>
</li>

<li>
<p>MegaRAID SCSI 320-2X</p>
</li>

<li>
<p>MegaRAID SCSI 320-4X</p>
</li>

<li>
<p>MegaRAID SATA 300-4X</p>
</li>

<li>
<p>MegaRAID SATA 300-8X</p>
</li>

<li>
<p>MegaRAID SATA 150-4</p>
</li>

<li>
<p>MegaRAID SATA 150-6</p>
</li>

<li>
<p>MegaRAID i4 133 RAID</p>
</li>

<li>
<p>MegaRAID SCSI 320-0</p>
</li>

<li>
<p>MegaRAID SCSI 320-1</p>
</li>

<li>
<p>MegaRAID SCSI 320-2</p>
</li>

<li>
<p>MegaRAID SCSI 320-4</p>
</li>

<li>
<p>MegaRAID Series 418</p>
</li>

<li>
<p>MegaRAID Enterprise 1200 (Series 428)</p>
</li>

<li>
<p>MegaRAID Enterprise 1300 (Series 434)</p>
</li>

<li>
<p>MegaRAID Enterprise 1400 (Series 438)</p>
</li>

<li>
<p>MegaRAID Enterprise 1500 (Series 467)</p>
</li>

<li>
<p>MegaRAID Enterprise 1600 (Series 471)</p>
</li>

<li>
<p>MegaRAID Elite 1500 (Series 467)</p>
</li>

<li>
<p>MegaRAID Elite 1600 (Series 493)</p>
</li>

<li>
<p>MegaRAID Elite 1650 (Series 4xx)</p>
</li>

<li>
<p>MegaRAID Express 100 (Series 466WS)</p>
</li>

<li>
<p>MegaRAID Express 200 (Series 466)</p>
</li>

<li>
<p>MegaRAID Express 300 (Series 490)</p>
</li>

<li>
<p>MegaRAID Express 500 (Series 475)</p>
</li>

<li>
<p>Dell PERC</p>
</li>

<li>
<p>Dell PERC 2/SC</p>
</li>

<li>
<p>Dell PERC 2/DC</p>
</li>

<li>
<p>Dell PERC 3/DCL</p>
</li>

<li>
<p>Dell PERC 3/QC</p>
</li>

<li>
<p>Dell PERC 4/DC</p>
</li>

<li>
<p>Dell PERC 4/IM</p>
</li>

<li>
<p>Dell PERC 4/SC</p>
</li>

<li>
<p>Dell PERC 4/Di</p>
</li>

<li>
<p>Dell PERC 4e/DC</p>
</li>

<li>
<p>Dell PERC 4e/Di</p>
</li>

<li>
<p>Dell PERC 4e/Si</p>
</li>

<li>
<p>Dell PERC 4ei</p>
</li>

<li>
<p>HP NetRAID-1/Si</p>
</li>

<li>
<p>HP NetRAID-3/Si (D4943A)</p>
</li>

<li>
<p>HP Embedded NetRAID</p>
</li>

<li>
<p>Intel RAID Controller SRCS16</p>
</li>

<li>
<p>Intel RAID Controller SRCU42X</p>
</li>
</ul>

<div class="NOTE">
<blockquote class="NOTE">
<p><b>Note:</b> Booting from these controllers is supported. EISA adapters are not
supported.</p>
</blockquote>
</div>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=arcmsr&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">arcmsr</span>(4)</span></a> driver
supports the following cards:</p>

<ul>
<li>
<p>ARC-1110</p>
</li>

<li>
<p>ARC-1120</p>
</li>

<li>
<p>ARC-1130</p>
</li>

<li>
<p>ARC-1160</p>
</li>

<li>
<p>ARC-1130-ML</p>
</li>

<li>
<p>ARC-1160-ML</p>
</li>

<li>
<p>ARC-1210</p>
</li>

<li>
<p>ARC-1220</p>
</li>

<li>
<p>ARC-1230</p>
</li>

<li>
<p>ARC-1260</p>
</li>

<li>
<p>ARC-1230-ML</p>
</li>

<li>
<p>ARC-1260-ML</p>
</li>
</ul>

<p>The adapters currently supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=asr&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">asr</span>(4)</span></a> driver
include the following:</p>

<ul>
<li>
<p>Adaptec Zero-Channel SCSI RAID 2000S, 2005S, 2010S, 2015S</p>
</li>

<li>
<p>Adaptec SCSI RAID 2100S, 2110S</p>
</li>

<li>
<p>Adaptec ATA-100 RAID 2400A</p>
</li>

<li>
<p>Adaptec SCSI RAID 3200S, 3210S</p>
</li>

<li>
<p>Adaptec SCSI RAID 3400S, 3410S</p>
</li>

<li>
<p>Adaptec SmartRAID PM1554</p>
</li>

<li>
<p>Adaptec SmartRAID PM1564</p>
</li>

<li>
<p>Adaptec SmartRAID PM2554</p>
</li>

<li>
<p>Adaptec SmartRAID PM2564</p>
</li>

<li>
<p>Adaptec SmartRAID PM2664</p>
</li>

<li>
<p>Adaptec SmartRAID PM2754</p>
</li>

<li>
<p>Adaptec SmartRAID PM2865</p>
</li>

<li>
<p>Adaptec SmartRAID PM3754</p>
</li>

<li>
<p>Adaptec SmartRAID PM3755U2B / SmartRAID V Millennium</p>
</li>

<li>
<p>Adaptec SmartRAID PM3757</p>
</li>

<li>
<p>DEC KZPCC-AC (LVD 1-ch, 4MB or 16MB cache), DEC KZPCC-CE (LVD 3-ch, 64MB cache), DEC
KZPCC-XC (LVD 1-ch, 16MB cache), DEC KZPCC-XE (LVD 3-ch, 64MB cache) -- rebadged
SmartRAID V Millennium</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=bt&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">bt</span>(4)</span></a> driver supports
the following BusLogic MultiMaster &#8220;W&#8221;, &#8220;C&#8221;, &#8220;S&#8221;, and
&#8220;A&#8221; series and compatible SCSI host adapters:</p>

<ul>
<li>
<p>BusLogic BT-445C</p>
</li>

<li>
<p>BusLogic BT-445S</p>
</li>

<li>
<p>BusLogic BT-540CF</p>
</li>

<li>
<p>BusLogic BT-542B</p>
</li>

<li>
<p>BusLogic BT-542B</p>
</li>

<li>
<p>BusLogic BT-542D</p>
</li>

<li>
<p>BusLogic BT-545C</p>
</li>

<li>
<p>BusLogic BT-545S</p>
</li>

<li>
<p>BusLogic/BusTek BT-640</p>
</li>

<li>
<p>BusLogic BT-742A</p>
</li>

<li>
<p>BusLogic BT-742A</p>
</li>

<li>
<p>BusLogic BT-747C</p>
</li>

<li>
<p>BusLogic BT-747D</p>
</li>

<li>
<p>BusLogic BT-747S</p>
</li>

<li>
<p>BusLogic BT-757C</p>
</li>

<li>
<p>BusLogic BT-757CD</p>
</li>

<li>
<p>BusLogic BT-757D</p>
</li>

<li>
<p>BusLogic BT-757S</p>
</li>

<li>
<p>BusLogic BT-946C</p>
</li>

<li>
<p>BusLogic BT-948</p>
</li>

<li>
<p>BusLogic BT-956C</p>
</li>

<li>
<p>BusLogic BT-956CD</p>
</li>

<li>
<p>BusLogic BT-958</p>
</li>

<li>
<p>BusLogic BT-958D</p>
</li>

<li>
<p>Storage Dimensions SDC3211B / SDC3211F</p>
</li>
</ul>

<p>AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones are also
supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=bt&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">bt</span>(4)</span></a> driver.</p>

<p>Controllers supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ciss&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ciss</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Compaq Smart Array 5300</p>
</li>

<li>
<p>Compaq Smart Array 532</p>
</li>

<li>
<p>Compaq Smart Array 5i</p>
</li>

<li>
<p>HP Smart Array 5312</p>
</li>

<li>
<p>HP Smart Array 6i</p>
</li>

<li>
<p>HP Smart Array 641</p>
</li>

<li>
<p>HP Smart Array 642</p>
</li>

<li>
<p>HP Smart Array 6400</p>
</li>

<li>
<p>HP Smart Array 6400 EM</p>
</li>

<li>
<p>HP Smart Array 6422</p>
</li>

<li>
<p>HP Smart Array V100</p>
</li>

<li>
<p>HP Modular Smart Array 20 (MSA20)</p>
</li>

<li>
<p>HP Modular Smart Array 500 (MSA500)</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=dpt&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">dpt</span>(4)</span></a> driver
provides support for the following RAID adapters:</p>

<ul>
<li>
<p>DPT Smart Cache Plus</p>
</li>

<li>
<p>Smart Cache II (PM2?2?, PM2022 [EISA], PM2024/PM2124 [PCI]) (Gen2)</p>
</li>

<li>
<p>Smart RAID II (PM3?2?, PM3021, PM3222)</p>
</li>

<li>
<p>Smart Cache III (PM2?3?)</p>
</li>

<li>
<p>Smart RAID III (PM3?3?, PM3332 [EISA], PM3334UW [PCI]) (Gen3)</p>
</li>

<li>
<p>Smart Cache IV (PM2?4?, PM2042 [EISA], PM2044/PM2144 [PCI]) (Gen4)</p>
</li>

<li>
<p>Smart RAID IV</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=hptmv&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">hptmv</span>(4)</span></a> driver
supports the following ATA RAID controllers:</p>

<ul>
<li>
<p>HighPoint's RocketRAID 182x series</p>
</li>
</ul>

<p>The following controllers are supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ida&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ida</span>(4)</span></a>
driver:</p>

<ul>
<li>
<p>Compaq SMART Array 221</p>
</li>

<li>
<p>Compaq Integrated SMART Array Controller</p>
</li>

<li>
<p>Compaq SMART Array 4200</p>
</li>

<li>
<p>Compaq SMART Array 4250ES</p>
</li>

<li>
<p>Compaq SMART 3200 Controller</p>
</li>

<li>
<p>Compaq SMART 3100ES Controller</p>
</li>

<li>
<p>Compaq SMART-2/DH Controller</p>
</li>

<li>
<p>Compaq SMART-2/SL Controller</p>
</li>

<li>
<p>Compaq SMART-2/P Controller</p>
</li>

<li>
<p>Compaq SMART-2/E Controller</p>
</li>

<li>
<p>Compaq SMART Controller</p>
</li>
</ul>

<p>Controllers supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=iir&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">iir</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Intel RAID Controller SRCMR</p>
</li>

<li>
<p>Intel Server RAID Controller U3-l (SRCU31a)</p>
</li>

<li>
<p>Intel Server RAID Controller U3-1L (SRCU31La)</p>
</li>

<li>
<p>Intel Server RAID Controller U3-2 (SRCU32)</p>
</li>

<li>
<p>All past and future releases of Intel and ICP RAID Controllers.</p>
</li>
</ul>

<ul>
<li>
<p>Intel RAID Controller SRCU21 (discontinued)</p>
</li>

<li>
<p>Intel RAID Controller SRCU31 (older revision, not compatible)</p>
</li>

<li>
<p>Intel RAID Controller SRCU31L (older revision, not compatible)</p>
</li>
</ul>

<p>The SRCU31 and SRCU31L can be updated via a firmware update available from Intel.</p>

<p>Controllers supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ips&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ips</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>IBM ServeRAID 3H</p>
</li>

<li>
<p>ServeRAID 4L/4M/4H</p>
</li>

<li>
<p>ServeRAID Series 5</p>
</li>

<li>
<p>ServeRAID 6i/6M</p>
</li>
</ul>

<p>Cards supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=isp&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">isp</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>ISP1000</p>
</li>

<li>
<p>PTI SBS440</p>
</li>

<li>
<p>ISP1020</p>
</li>

<li>
<p>ISP1040</p>
</li>

<li>
<p>PTI SBS450</p>
</li>

<li>
<p>Qlogic 1240</p>
</li>

<li>
<p>Qlogic 1020</p>
</li>

<li>
<p>Qlogic 1040</p>
</li>

<li>
<p>Qlogic 1080</p>
</li>

<li>
<p>Qlogic 1280</p>
</li>

<li>
<p>Qlogic 12160</p>
</li>

<li>
<p>Qlogic 2100</p>
</li>

<li>
<p>Qlogic 2102</p>
</li>

<li>
<p>Qlogic 2200</p>
</li>

<li>
<p>Qlogic 2202</p>
</li>

<li>
<p>Qlogic 2204</p>
</li>

<li>
<p>Qlogic 2300</p>
</li>

<li>
<p>Qlogic 2312</p>
</li>

<li>
<p>PTI SBS470</p>
</li>

<li>
<p>Antares P-0033</p>
</li>
</ul>

<p>Controllers supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=mlx&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">mlx</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Mylex DAC960P</p>
</li>

<li>
<p>Mylex DAC960PD / DEC KZPSC (Fast Wide)</p>
</li>

<li>
<p>Mylex DAC960PDU</p>
</li>

<li>
<p>Mylex DAC960PL</p>
</li>

<li>
<p>Mylex DAC960PJ</p>
</li>

<li>
<p>Mylex DAC960PG</p>
</li>

<li>
<p>Mylex DAC960PU / DEC PZPAC (Ultra Wide)</p>
</li>

<li>
<p>Mylex AcceleRAID 150 (DAC960PRL)</p>
</li>

<li>
<p>Mylex AcceleRAID 250 (DAC960PTL1)</p>
</li>

<li>
<p>Mylex eXtremeRAID 1100 (DAC1164P)</p>
</li>

<li>
<p>RAIDarray 230 controllers, aka the Ultra-SCSI DEC KZPAC-AA (1-ch, 4MB cache), KZPAC-CA
(3-ch, 4MB), KZPAC-CB (3-ch, 8MB cache)</p>
</li>
</ul>

<p>All major firmware revisions (2.x, 3.x, 4.x and 5.x) are supported, however it is
always advisable to upgrade to the most recent firmware available for the controller.
Compatible Mylex controllers not listed should work, but have not been verified.</p>

<div class="NOTE">
<blockquote class="NOTE">
<p><b>Note:</b> Booting from these controllers is supported. EISA adapters are not
supported.</p>
</blockquote>
</div>

<p>Controllers supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=mly&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">mly</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Mylex AcceleRAID 160</p>
</li>

<li>
<p>Mylex AcceleRAID 170</p>
</li>

<li>
<p>Mylex AcceleRAID 352</p>
</li>

<li>
<p>Mylex eXtremeRAID 2000</p>
</li>

<li>
<p>Mylex eXtremeRAID 3000</p>
</li>
</ul>

<p>Compatible Mylex controllers not listed should work, but have not been verified.</p>

<p>The following controllers are supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=mpt&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">mpt</span>(4)</span></a>
driver:</p>

<ul>
<li>
<p>LSI Logic 53c1030 (Dual Ultra320 SCSI)</p>
</li>

<li>
<p>LSI Logic FC909 (1Gb/s Fibre Channel)</p>
</li>

<li>
<p>LSI Logic FC909A (Dual 1Gb/s Fibre Channel)</p>
</li>

<li>
<p>LSI Logic FC919 (2Gb/s Fibre Channel)</p>
</li>

<li>
<p>LSI Logic FC929, LSI Logic FC929X (Dual 2Gb/s Fibre Channel)</p>
</li>
</ul>

<p>The SCSI controller chips supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=mpt&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">mpt</span>(4)</span></a> driver
can be found onboard on many systems including:</p>

<ul>
<li>
<p>Dell PowerEdge 1750</p>
</li>

<li>
<p>IBM eServer xSeries 335</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ncr&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ncr</span>(4)</span></a> driver
provides support for the following NCR/Symbios SCSI controller chips:</p>

<ul>
<li>
<p>53C810</p>
</li>

<li>
<p>53C810A</p>
</li>

<li>
<p>53C815</p>
</li>

<li>
<p>53C820</p>
</li>

<li>
<p>53C825A</p>
</li>

<li>
<p>53C860</p>
</li>

<li>
<p>53C875</p>
</li>

<li>
<p>53C875J</p>
</li>

<li>
<p>53C885</p>
</li>

<li>
<p>53C895</p>
</li>

<li>
<p>53C895A</p>
</li>

<li>
<p>53C896</p>
</li>

<li>
<p>53C1510D</p>
</li>
</ul>

<p>The following add-on boards are known to be supported:</p>

<ul>
<li>
<p>I-O DATA SC-98/PCI (PC-98)</p>
</li>

<li>
<p>I-O DATA SC-PCI (PC-98)</p>
</li>
</ul>

<p>The following devices are currently supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ncv&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ncv</span>(4)</span></a>
driver:</p>

<ul>
<li>
<p>I-O DATA PCSC-DV</p>
</li>

<li>
<p>KME KXLC002 (TAXAN ICD-400PN, etc.), KXLC004, and UJDCD450</p>
</li>

<li>
<p>Macnica Miracle SCSI-II mPS110</p>
</li>

<li>
<p>Media Intelligent MSC-110, MSC-200</p>
</li>

<li>
<p>NEC PC-9801N-J03R</p>
</li>

<li>
<p>New Media Corporation BASICS SCSI</p>
</li>

<li>
<p>Qlogic Fast SCSI</p>
</li>

<li>
<p>RATOC REX-9530, REX-5572 (SCSI only)</p>
</li>
</ul>

<p>Controllers supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=nsp&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">nsp</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Alpha-Data AD-PCS201</p>
</li>

<li>
<p>I-O DATA CBSC16</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=pst&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">pst</span>(4)</span></a> driver
supports the Promise Supertrak SX6000 ATA hardware RAID controller.</p>

<p>Controllers supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=stg&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">stg</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Adaptec 2920/A</p>
</li>

<li>
<p>Future Domain SCSI2GO</p>
</li>

<li>
<p>Future Domain TMC-18XX/3260</p>
</li>

<li>
<p>IBM SCSI PCMCIA Card</p>
</li>

<li>
<p>ICM PSC-2401 SCSI</p>
</li>

<li>
<p>MELCO IFC-SC</p>
</li>

<li>
<p>RATOC REX-5536, REX-5536AM, REX-5536M, REX-9836A</p>
</li>
</ul>

<p>Note that the Adaptec 2920C is supported by the ahc(4) driver.</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sym&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sym</span>(4)</span></a> driver
provides support for the following Symbios/LSI Logic PCI SCSI controllers:</p>

<ul>
<li>
<p>53C810</p>
</li>

<li>
<p>53C810A</p>
</li>

<li>
<p>53C815</p>
</li>

<li>
<p>53C825</p>
</li>

<li>
<p>53C825A</p>
</li>

<li>
<p>53C860</p>
</li>

<li>
<p>53C875</p>
</li>

<li>
<p>53C876</p>
</li>

<li>
<p>53C895</p>
</li>

<li>
<p>53C895A</p>
</li>

<li>
<p>53C896</p>
</li>

<li>
<p>53C897</p>
</li>

<li>
<p>53C1000</p>
</li>

<li>
<p>53C1000R</p>
</li>

<li>
<p>53C1010-33</p>
</li>

<li>
<p>53C1010-66</p>
</li>

<li>
<p>53C1510D</p>
</li>
</ul>

<p>The SCSI controllers supported by <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sym&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sym</span>(4)</span></a> can be
either embedded on a motherboard, or on one of the following add-on boards:</p>

<ul>
<li>
<p>ASUS SC-200, SC-896</p>
</li>

<li>
<p>Data Technology DTC3130 (all variants)</p>
</li>

<li>
<p>DawiControl DC2976UW</p>
</li>

<li>
<p>Diamond FirePort (all)</p>
</li>

<li>
<p>I-O DATA SC-UPCI (PC-98)</p>
</li>

<li>
<p>Logitec LHA-521UA (PC-98)</p>
</li>

<li>
<p>NCR cards (all)</p>
</li>

<li>
<p>Symbios cards (all)</p>
</li>

<li>
<p>Tekram DC390W, 390U, 390F, 390U2B, 390U2W, 390U3D, and 390U3W</p>
</li>

<li>
<p>Tyan S1365</p>
</li>
</ul>

<p>SCSI controllers supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=trm&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">trm</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI connector</p>
</li>

<li>
<p>Tekram DC-315U PCI Ultra SCSI adapter without BIOS</p>
</li>

<li>
<p>Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI
connector</p>
</li>

<li>
<p>Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS</p>
</li>

<li>
<p>Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS</p>
</li>

<li>
<p>Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS</p>
</li>
</ul>

<p>For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host adapters, use the
sym(4) driver.</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=twa&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">twa</span>(4)</span></a> driver
supports the following SATA RAID controllers:</p>

<ul>
<li>
<p>AMCC's 3ware 9500S-4LP</p>
</li>

<li>
<p>AMCC's 3ware 9500S-8</p>
</li>

<li>
<p>AMCC's 3ware 9500S-8MI</p>
</li>

<li>
<p>AMCC's 3ware 9500S-12</p>
</li>

<li>
<p>AMCC's 3ware 9500S-12MI</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=twe&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">twe</span>(4)</span></a> driver
supports the following PATA/SATA RAID controllers:</p>

<ul>
<li>
<p>AMCC's 3ware 5000 series</p>
</li>

<li>
<p>AMCC's 3ware 6000 series</p>
</li>

<li>
<p>AMCC's 3ware 7000-2</p>
</li>

<li>
<p>AMCC's 3ware 7006-2</p>
</li>

<li>
<p>AMCC's 3ware 7500-4LP</p>
</li>

<li>
<p>AMCC's 3ware 7500-8</p>
</li>

<li>
<p>AMCC's 3ware 7500-12</p>
</li>

<li>
<p>AMCC's 3ware 7506-4LP</p>
</li>

<li>
<p>AMCC's 3ware 7506-8</p>
</li>

<li>
<p>AMCC's 3ware 7506-12</p>
</li>

<li>
<p>AMCC's 3ware 8006-2LP</p>
</li>

<li>
<p>AMCC's 3ware 8500-4LP</p>
</li>

<li>
<p>AMCC's 3ware 8500-8</p>
</li>

<li>
<p>AMCC's 3ware 8500-12</p>
</li>

<li>
<p>AMCC's 3ware 8506-4LP</p>
</li>

<li>
<p>AMCC's 3ware 8506-8</p>
</li>

<li>
<p>AMCC's 3ware 8506-8MI</p>
</li>

<li>
<p>AMCC's 3ware 8506-12</p>
</li>

<li>
<p>AMCC's 3ware 8506-12MI</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=vpo&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">vpo</span>(4)</span></a> driver
supports the following parallel to SCSI interfaces:</p>

<ul>
<li>
<p>Adaptec AIC-7110 Parallel to SCSI interface (built-in to Iomega ZIP drives)</p>
</li>

<li>
<p>Iomega Jaz Traveller interface</p>
</li>

<li>
<p>Iomega MatchMaker SCSI interface (built-in to Iomega ZIP+ drives)</p>
</li>
</ul>

<p>The wds(4) driver supports the WD7000 SCSI controller.</p>

<p>With all supported SCSI controllers, full support is provided for SCSI-I, SCSI-II, and
SCSI-III peripherals, including hard disks, optical disks, tape drives (including DAT,
8mm Exabyte, Mammoth, and DLT), medium changers, processor target devices and CD-ROM
drives. WORM devices that support CD-ROM commands are supported for read-only access by
the CD-ROM drivers (such as <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=cd&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">cd</span>(4)</span></a>).
WORM/CD-R/CD-RW writing support is provided by <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=cdrecord&sektion=1&manpath=FreeBSD+Ports"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">cdrecord</span>(1)</span></a>, which is
a part of the <a
href="http://www.FreeBSD.org/cgi/url.cgi?ports/sysutils/cdrtools/pkg-descr"><tt
class="FILENAME">sysutils/cdrtools</tt></a> port in the Ports Collection.</p>

<p>The following CD-ROM type systems are supported at this time:</p>

<ul>
<li>
<p>SCSI interface (also includes ProAudio Spectrum and SoundBlaster SCSI) (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=cd&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">cd</span>(4)</span></a>)</p>
</li>

<li>
<p>Sony proprietary interface (all models) (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=scd&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">scd</span>(4)</span></a>)</p>
</li>

<li>
<p>ATAPI IDE interface (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=acd&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">acd</span>(4)</span></a>)</p>
</li>
</ul>

<br />
<br />
<p>The following device is unmaintained:</p>

<ul>
<li>
<p>Mitsumi proprietary CD-ROM interface (all models) (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=mcd&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">mcd</span>(4)</span></a>)</p>
</li>
</ul>

<br />
<br />
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="ETHERNET" name="ETHERNET">3.2 Ethernet Interfaces</a></h3>

<p>Adapters supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=aue&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">aue</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Abocom UFE1000, DSB650TX_NA</p>
</li>

<li>
<p>Accton USB320-EC, SpeedStream</p>
</li>

<li>
<p>ADMtek AN986, AN8511</p>
</li>

<li>
<p>Billionton USB100, USB100LP, USB100EL, USBE100</p>
</li>

<li>
<p>Corega Ether FEther USB-T, FEther USB-TX, FEther USB-TXS</p>
</li>

<li>
<p>D-Link DSB-650, DSB-650TX, DSB-650TX-PNA</p>
</li>

<li>
<p>Elecom LD-USBL/TX</p>
</li>

<li>
<p>Elsa Microlink USB2Ethernet</p>
</li>

<li>
<p>HP hn210e</p>
</li>

<li>
<p>I-O Data USB ETTX</p>
</li>

<li>
<p>Kingston KNU101TX</p>
</li>

<li>
<p>LinkSys USB10T adapters that contain the AN986 Pegasus chipset, USB10TA, USB10TX,
USB100TX, USB100H1</p>
</li>

<li>
<p>MELCO LUA-TX, LUA2-TX</p>
</li>

<li>
<p>Planex UE-200TX</p>
</li>

<li>
<p>Sandberg USB to Network Link (model number 133-06)</p>
</li>

<li>
<p>Siemens Speedstream</p>
</li>

<li>
<p>SmartBridges smartNIC</p>
</li>

<li>
<p>SMC 2202USB</p>
</li>

<li>
<p>SOHOware NUB100</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=axe&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">axe</span>(4)</span></a> driver
supports ASIX Electronics AX88172 based USB Ethernet adapters including:</p>

<ul>
<li>
<p>Buffalo (Melco Inc.) LUA-U2-KTX</p>
</li>

<li>
<p>D-Link DUBE100</p>
</li>

<li>
<p>LinkSys USB200M</p>
</li>

<li>
<p>Netgear FA120</p>
</li>

<li>
<p>Sitecom LN-029</p>
</li>

<li>
<p>System TALKS Inc. SGC-X2UL</p>
</li>
</ul>

<p>Broadcom BCM4401 based Fast Ethernet adapters (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=bfe&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">bfe</span>(4)</span></a>
driver)</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=bge&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">bge</span>(4)</span></a> driver
provides support for various NICs based on the Broadcom BCM570x family of Gigabit
Ethernet controller chips, including the following:</p>

<ul>
<li>
<p>3Com 3c996-T (10/100/1000baseTX)</p>
</li>

<li>
<p>Dell PowerEdge 1750 integrated BCM5704C NIC (10/100/1000baseTX)</p>
</li>

<li>
<p>Dell PowerEdge 2550 integrated BCM5700 NIC (10/100/1000baseTX)</p>
</li>

<li>
<p>Dell PowerEdge 2650 integrated BCM5703 NIC (10/100/1000baseTX)</p>
</li>

<li>
<p>IBM x235 server integrated BCM5703x NIC (10/100/1000baseTX)</p>
</li>

<li>
<p>HP ProLiant NC7760 embedded Gigabit NIC (10/100/1000baseTX)</p>
</li>

<li>
<p>HP ProLiant NC7770 PCI-X Gigabit NIC (10/100/1000baseTX)</p>
</li>

<li>
<p>HP ProLiant NC7781 embedded PCI-X Gigabit NIC (10/100/1000baseTX)</p>
</li>

<li>
<p>Netgear GA302T (10/100/1000baseTX)</p>
</li>

<li>
<p>SysKonnect SK-9D21 (10/100/1000baseTX)</p>
</li>

<li>
<p>SysKonnect SK-9D41 (1000baseSX)</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=cue&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">cue</span>(4)</span></a> driver
supports CATC USB-EL1210A based USB Ethernet adapters including:</p>

<ul>
<li>
<p>Belkin F5U011/F5U111</p>
</li>

<li>
<p>CATC Netmate</p>
</li>

<li>
<p>CATC Netmate II</p>
</li>

<li>
<p>SmartBridges SmartLink</p>
</li>
</ul>

<p>Crystal Semiconductor CS89x0-based NICs (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=cs&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">cs</span>(4)</span></a> driver)</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=dc&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">dc</span>(4)</span></a> driver provides
support for the following chipsets:</p>

<ul>
<li>
<p>DEC/Intel 21143</p>
</li>

<li>
<p>ADMtek AL981 Comet, AN985 Centaur, ADM9511 Centaur II and ADM9513 Centaur II</p>
</li>

<li>
<p>ASIX Electronics AX88140A and AX88141</p>
</li>

<li>
<p>Conexant LANfinity RS7112 (miniPCI)</p>
</li>

<li>
<p>Davicom DM9009, DM9100, DM9102 and DM9102A</p>
</li>

<li>
<p>Lite-On 82c168 and 82c169 PNIC</p>
</li>

<li>
<p>Lite-On/Macronix 82c115 PNIC II</p>
</li>

<li>
<p>Macronix 98713, 98713A, 98715, 98715A, 98715AEC-C, 98725, 98727 and 98732</p>
</li>

<li>
<p>Xircom X3201 (cardbus only)</p>
</li>
</ul>

<p>The following NICs are known to work with the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=dc&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">dc</span>(4)</span></a> driver at this
time:</p>

<ul>
<li>
<p>3Com OfficeConnect 10/100B (ADMtek AN985 Centaur-P)</p>
</li>

<li>
<p>Abocom FE2500</p>
</li>

<li>
<p>Accton EN1217 (98715A)</p>
</li>

<li>
<p>Accton EN2242 MiniPCI</p>
</li>

<li>
<p>Adico AE310TX (98715A)</p>
</li>

<li>
<p>Alfa Inc GFC2204 (ASIX AX88140A)</p>
</li>

<li>
<p>Built in 10Mbps only Ethernet on Compaq Presario 7900 series desktops (21143,
non-MII)</p>
</li>

<li>
<p>Built in DE500-BA on DEC Alpha workstations (21143, non-MII)</p>
</li>

<li>
<p>Built in Sun DMFE 10/100 Mbps Ethernet on Sun Netra X1 and Sun Fire V100 (DM9102A,
MII)</p>
</li>

<li>
<p>Built in Ethernet on LinkSys EtherFast 10/100 Instant GigaDrive (DM9102, MII)</p>
</li>

<li>
<p>CNet Pro110B (ASIX AX88140A)</p>
</li>

<li>
<p>CNet Pro120A (98715A or 98713A) and CNet Pro120B (98715)</p>
</li>

<li>
<p>Compex RL100-TX (98713 or 98713A)</p>
</li>

<li>
<p>D-Link DFE-570TX (21143, MII, quad port)</p>
</li>

<li>
<p>Digital DE500-BA 10/100 (21143, non-MII)</p>
</li>

<li>
<p>ELECOM Laneed LD-CBL/TXA (ADMtek AN985)</p>
</li>

<li>
<p>Hawking CB102 CardBus</p>
</li>

<li>
<p>IBM EtherJet Cardbus Adapter</p>
</li>

<li>
<p>Intel PRO/100 Mobile Cardbus (versions that use the X3201 chipset)</p>
</li>

<li>
<p>Jaton XpressNet (Davicom DM9102)</p>
</li>

<li>
<p>Kingston KNE100TX (21143, MII)</p>
</li>

<li>
<p>Kingston KNE110TX (PNIC 82c169)</p>
</li>

<li>
<p>LinkSys LNE100TX (PNIC 82c168, 82c169)</p>
</li>

<li>
<p>LinkSys LNE100TX v2.0 (PNIC II 82c115)</p>
</li>

<li>
<p>LinkSys LNE100TX v4.0/4.1 (ADMtek AN985 Centaur-P)</p>
</li>

<li>
<p>Matrox FastNIC 10/100 (PNIC 82c168, 82c169)</p>
</li>

<li>
<p>Melco LGY-PCI-TXL</p>
</li>

<li>
<p>Microsoft MN-120 10/100 CardBus (ADMTek Centaur-C)</p>
</li>

<li>
<p>Microsoft MN-130 10/100 PCI (ADMTek Centaur-P)</p>
</li>

<li>
<p>NDC SOHOware SFA110A (98713A)</p>
</li>

<li>
<p>NDC SOHOware SFA110A Rev B4 (98715AEC-C)</p>
</li>

<li>
<p>NetGear FA310-TX Rev. D1, D2 or D3 (PNIC 82c169)</p>
</li>

<li>
<p>Netgear FA511</p>
</li>

<li>
<p>PlaneX FNW-3602-T (ADMtek AN985)</p>
</li>

<li>
<p>SMC EZ Card 10/100 1233A-TX (ADMtek AN985)</p>
</li>

<li>
<p>SVEC PN102-TX (98713)</p>
</li>

<li>
<p>Xircom Cardbus Realport</p>
</li>

<li>
<p>Xircom Cardbus Ethernet 10/100</p>
</li>

<li>
<p>Xircom Cardbus Ethernet II 10/100</p>
</li>
</ul>

<p>Adapters supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=de&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">de</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Adaptec ANA-6944/TX</p>
</li>

<li>
<p>Cogent EM100FX and EM440TX</p>
</li>

<li>
<p>Corega FastEther PCI-TX</p>
</li>

<li>
<p>D-Link DFE-500TX</p>
</li>

<li>
<p>DEC DE435, DE425, DEC DE450, and DEC DE500</p>
</li>

<li>
<p>ELECOM LD-PCI2T, LD-PCITS</p>
</li>

<li>
<p>I-O DATA LA2/T-PCI</p>
</li>

<li>
<p>SMC Etherpower 8432, 9332 and 9334</p>
</li>

<li>
<p>ZNYX ZX3xx</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ed&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">ed</span>(4)</span></a> driver supports
the following Ethernet NICs:</p>

<ul>
<li>
<p>3Com 3c503 Etherlink II</p>
</li>

<li>
<p>AR-P500 Ethernet</p>
</li>

<li>
<p>Accton EN1644 (old model), EN1646 (old model), EN2203 (old model) (110pin) (flags
0xd00000)</p>
</li>

<li>
<p>Accton EN2212/EN2216/UE2216</p>
</li>

<li>
<p>Allied Telesis CentreCOM LA100-PCM_V2</p>
</li>

<li>
<p>Allied Telesis LA-98 (flags 0x000000) (PC-98)</p>
</li>

<li>
<p>Allied Telesis SIC-98, SIC-98NOTE (110pin), SIU-98 (flags 0x600000) (PC-98)</p>
</li>

<li>
<p>Allied Telesis SIU-98-D (flags 0x610000) (PC-98)</p>
</li>

<li>
<p>AmbiCom 10BaseT card</p>
</li>

<li>
<p>Bay Networks NETGEAR FA410TXC Fast Ethernet</p>
</li>

<li>
<p>Belkin F5D5020 PC Card Fast Ethernet</p>
</li>

<li>
<p>Billionton LM5LT-10B Ethernet/Modem PC Card</p>
</li>

<li>
<p>Bromax iPort 10/100 Ethernet PC Card</p>
</li>

<li>
<p>Bromax iPort 10 Ethernet PC Card</p>
</li>

<li>
<p>Buffalo LPC2-CLT, LPC3-CLT, LPC3-CLX, LPC4-TX PC Card</p>
</li>

<li>
<p>CNet BC40 adapter</p>
</li>

<li>
<p>Compex Net-A adapter</p>
</li>

<li>
<p>Contec C-NET(98), RT-1007(98), C-NET(9N) (110pin) (flags 0xa00000) (PC-98)</p>
</li>

<li>
<p>Contec C-NET(98)E-A, C-NET(98)L-A, C-NET(98)P (flags 0x300000) (PC-98)</p>
</li>

<li>
<p>Corega Ether98-T (flags 0x000000) (PC-98)</p>
</li>

<li>
<p>Corega Ether PCC-T/EtherII PCC-T/FEther PCC-TXF/PCC-TXD</p>
</li>

<li>
<p>CyQ've ELA-010</p>
</li>

<li>
<p>DEC EtherWorks DE305</p>
</li>

<li>
<p>Danpex EN-6200P2</p>
</li>

<li>
<p>D-Link DE-298, DE-298P (flags 0x500000) (PC-98)</p>
</li>

<li>
<p>D-Link DE-650/660</p>
</li>

<li>
<p>D-Link IC-CARD/IC-CARD+ Ethernet</p>
</li>

<li>
<p>ELECOM LD-98P (flags 0x500000) (PC-98)</p>
</li>

<li>
<p>ELECOM LD-BDN, LD-NW801G (flags 0x200000) (PC-98)</p>
</li>

<li>
<p>ELECOM Laneed LD-CDL/TX, LD-CDF, LD-CDS, LD-10/100CD, LD-CDWA (DP83902A)</p>
</li>

<li>
<p>HP PC Lan+ 27247B and 27252A</p>
</li>

<li>
<p>IBM Creditcard Ethernet I/II</p>
</li>

<li>
<p>ICM AD-ET2-T, DT-ET-25, DT-ET-T5, IF-2766ET, IF-2771ET, NB-ET-T (110pin) (flags
0x500000) (PC-98)</p>
</li>

<li>
<p>I-O DATA LA/T-98, LA/T-98SB, LA2/T-98, ET/T-98 (flags 0x900000) (PC-98)</p>
</li>

<li>
<p>I-O DATA ET2/T-PCI</p>
</li>

<li>
<p>I-O DATA PCLATE</p>
</li>

<li>
<p>Kansai KLA-98C/T (flags 0x900000) (PC-98)</p>
</li>

<li>
<p>Kingston KNE-PC2, CIO10T, KNE-PCM/x Ethernet</p>
</li>

<li>
<p>Linksys EC2T/PCMPC100/PCM100, PCMLM56</p>
</li>

<li>
<p>Linksys EtherFast 10/100 PC Card, Combo PCMCIA Ethernet Card (PCMPC100 V2)</p>
</li>

<li>
<p>Logitec LAN-98T (flags 0xb00000) (PC-98)</p>
</li>

<li>
<p>MACNICA Ethernet ME1 for JEIDA</p>
</li>

<li>
<p>MACNICA ME98 (flags 0x900000) (PC-98)</p>
</li>

<li>
<p>MACNICA NE2098 (flags 0x400000) (PC-98)</p>
</li>

<li>
<p>MELCO EGY-98 (flags 0x300000) (PC-98)</p>
</li>

<li>
<p>MELCO LGH-98, LGY-98, LGY-98-N (110pin), IND-SP, IND-SS (flags 0x400000) (PC-98)</p>
</li>

<li>
<p>MELCO LGY-PCI-TR</p>
</li>

<li>
<p>MELCO LPC-T/LPC2-T/LPC2-CLT/LPC2-TX/LPC3-TX/LPC3-CLX</p>
</li>

<li>
<p>NDC Ethernet Instant-Link</p>
</li>

<li>
<p>NEC PC-9801-77, PC-9801-78 (flags 0x910000) (PC-98)</p>
</li>

<li>
<p>NEC PC-9801-107, PC-9801-108 (flags 0x800000) (PC-98)</p>
</li>

<li>
<p>National Semiconductor InfoMover NE4100</p>
</li>

<li>
<p>NetGear FA-410TX</p>
</li>

<li>
<p>NetVin 5000</p>
</li>

<li>
<p>Network Everywhere Ethernet 10BaseT PC Card</p>
</li>

<li>
<p>Networld 98X3 (flags 0xd00000) (PC-98)</p>
</li>

<li>
<p>Networld EC-98X, EP-98X (flags 0xd10000) (PC-98)</p>
</li>

<li>
<p>New Media LANSurfer 10+56 Ethernet/Modem</p>
</li>

<li>
<p>New Media LANSurfer</p>
</li>

<li>
<p>Novell NE1000/NE2000/NE2100</p>
</li>

<li>
<p>PLANEX ENW-8300-T</p>
</li>

<li>
<p>PLANEX EN-2298-C (flags 0x200000) (PC-98)</p>
</li>

<li>
<p>PLANEX EN-2298P-T, EN-2298-T (flags 0x500000) (PC-98)</p>
</li>

<li>
<p>PLANEX FNW-3600-T</p>
</li>

<li>
<p>Psion 10/100 LANGLOBAL Combine iT</p>
</li>

<li>
<p>RealTek 8029</p>
</li>

<li>
<p>Relia Combo-L/M-56k PC Card</p>
</li>

<li>
<p>SMC Elite 16 WD8013</p>
</li>

<li>
<p>SMC Elite Ultra</p>
</li>

<li>
<p>SMC EtherEZ98 (flags 0x000000) (PC-98)</p>
</li>

<li>
<p>SMC WD8003E/WD8003EBT/WD8003S/WD8003SBT/WD8003W/WD8013EBT/WD8013W and clones</p>
</li>

<li>
<p>SMC EZCard PC Card, 8040-TX, 8041-TX</p>
</li>

<li>
<p>Socket LP-E, ES-1000 Ethernet/Serial, LP-E CF, LP-FE CF</p>
</li>

<li>
<p>Surecom EtherPerfect EP-427</p>
</li>

<li>
<p>Surecom NE-34</p>
</li>

<li>
<p>TDK 3000/3400/5670 Fast Etherenet/Modem</p>
</li>

<li>
<p>TDK LAK-CD031, Grey Cell GCS2000 Ethernet Card</p>
</li>

<li>
<p>TDK DFL5610WS Ethernet/Modem PC Card</p>
</li>

<li>
<p>Telecom Device SuperSocket RE450T</p>
</li>

<li>
<p>VIA VT86C926</p>
</li>

<li>
<p>Winbond W89C940</p>
</li>
</ul>

<p>C-Bus, ISA, PCI and PC Card devices are supported.</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=el&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">el</span>(4)</span></a> driver supports
the 3Com 3c501 8bit ISA Ethernet card.</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=em&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">em</span>(4)</span></a> driver supports
Gigabit Ethernet adapters based on the Intel 82540, 82541ER, 82541PI, 82542, 82543,
82544, 82545, 82546, 82546EB, 82546GB, 82547 and 82573 controller chips:</p>

<ul>
<li>
<p>Intel PRO/1000 CT Network Connection (82547)</p>
</li>

<li>
<p>Intel PRO/1000 F Server Adapter (82543)</p>
</li>

<li>
<p>Intel PRO/1000 Gigabit Server Adapter (82542)</p>
</li>

<li>
<p>Intel PRO/1000 GT Desktop Adapter (82541PI)</p>
</li>

<li>
<p>Intel PRO/1000 MF Dual Port Server Adapter (82546)</p>
</li>

<li>
<p>Intel PRO/1000 MF Server Adapter (82545)</p>
</li>

<li>
<p>Intel PRO/1000 MF Server Adapter (LX) (82545)</p>
</li>

<li>
<p>Intel PRO/1000 MT Desktop Adapter (82540)</p>
</li>

<li>
<p>Intel PRO/1000 MT Desktop Adapter (82541)</p>
</li>

<li>
<p>Intel PRO/1000 MT Dual Port Server Adapter (82546)</p>
</li>

<li>
<p>Intel PRO/1000 MT Quad Port Server Adapter (82546EB)</p>
</li>

<li>
<p>Intel PRO/1000 MT Server Adapter (82545)</p>
</li>

<li>
<p>Intel PRO/1000 T Desktop Adapter (82544)</p>
</li>

<li>
<p>Intel PRO/1000 T Server Adapter (82543)</p>
</li>

<li>
<p>Intel PRO/1000 XF Server Adapter (82544)</p>
</li>

<li>
<p>Intel PRO/1000 XT Server Adapter (82544)</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ep&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">ep</span>(4)</span></a> driver supports
Ethernet adapters based on the 3Com 3C5x9 Etherlink III Parallel Tasking chipset,
including:</p>

<ul>
<li>
<p>3Com 3C1 CF</p>
</li>

<li>
<p>3Com 3C509-TP, 3C509-BNC, 3C509-Combo, 3C509-TPO, 3C509-TPC ISA</p>
</li>

<li>
<p>3Com 3C509B-TP, 3C509B-BNC, 3C509B-Combo, 3C509B-TPO, 3C509B-TPC ISA</p>
</li>

<li>
<p>3Com 3C529, 3C529-TP MCA</p>
</li>

<li>
<p>3Com 3C562/3C563 PCMCIA</p>
</li>

<li>
<p>3Com 3C569B-J-TPO, 3C569B-J-COMBO CBUS</p>
</li>

<li>
<p>3Com 3C574, 3C574TX, 3C574-TX, 3CCFE574BT, 3CXFE574BT, 3C3FE574BT PCMCIA</p>
</li>

<li>
<p>3Com 3C579-TP, 3C579-BNC EISA</p>
</li>

<li>
<p>3Com 3C589, 3C589B, 3C589C, 3C589D, 3CXE589DT PCMCIA</p>
</li>

<li>
<p>3Com 3CCFEM556B, 3CCFEM556BI PCMCIA</p>
</li>

<li>
<p>3Com 3CXE589EC, 3CCE589EC, 3CXE589ET, 3CCE589ET PCMCIA</p>
</li>

<li>
<p>3Com Megahertz 3CCEM556, 3CXEM556, 3CCEM556B, 3CXEM556B, 3C3FEM556C PCMCIA</p>
</li>

<li>
<p>3Com OfficeConnect 3CXSH572BT, 3CCSH572BT PCMCIA</p>
</li>

<li>
<p>Farallon EtherWave and EtherMac PC Card (P/n 595/895 with BLUE arrow)</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ex&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">ex</span>(4)</span></a> driver supports
the following Ethernet adapters:</p>

<ul>
<li>
<p>Intel EtherExpress Pro/10</p>
</li>

<li>
<p>Intel EtherExpress Pro/10+</p>
</li>

<li>
<p>The Olicom OC2220</p>
</li>
</ul>

<p>Controllers and cards supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=fe&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">fe</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Allied Telesis RE1000, RE1000Plus, ME1500 (110-pin)</p>
</li>

<li>
<p>CONTEC C-NET(98)P2, C-NET (9N)E (110-pin), C-NET(9N)C (ExtCard)</p>
</li>

<li>
<p>CONTEC C-NET(PC)C PCMCIA Ethernet</p>
</li>

<li>
<p>Eagle Tech NE200T</p>
</li>

<li>
<p>Eiger Labs EPX-10BT</p>
</li>

<li>
<p>Fujitsu FMV-J182, FMV-J182A</p>
</li>

<li>
<p>Fujitsu MB86960A, MB86965A</p>
</li>

<li>
<p>Fujitsu MBH10303, MBH10302 Ethernet PCMCIA</p>
</li>

<li>
<p>Fujitsu Towa LA501 Ethernet</p>
</li>

<li>
<p>HITACHI HT-4840-11</p>
</li>

<li>
<p>NextCom J Link NC5310</p>
</li>

<li>
<p>RATOC REX-5588, REX-9822, REX-4886, and REX-R280</p>
</li>

<li>
<p>RATOC REX-9880/9881/9882/9883</p>
</li>

<li>
<p>TDK LAC-98012, LAC-98013, LAC-98025, LAC-9N011 (110-pin)</p>
</li>

<li>
<p>TDK LAK-CD021, LAK-CD021A, LAK-CD021BX</p>
</li>

<li>
<p>Ungermann-Bass Access/PC N98C+(PC85152, PC85142), Access/NOTE N98(PC86132)
(110-pin)</p>
</li>
</ul>

<p>Adapters supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=fxp&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">fxp</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Intel EtherExpress PRO/10</p>
</li>

<li>
<p>Intel InBusiness 10/100</p>
</li>

<li>
<p>Intel PRO/100B / EtherExpressPRO/100 B PCI Adapter</p>
</li>

<li>
<p>Intel PRO/100+ Management Adapter</p>
</li>

<li>
<p>Intel PRO/100 VE Desktop Adapter</p>
</li>

<li>
<p>Intel PRO/100 M Desktop Adapter</p>
</li>

<li>
<p>Intel PRO/100 S Desktop, Server and Dual-Port Server Adapters</p>
</li>

<li>
<p>Contec C-NET(PI)-100TX (PC-98)</p>
</li>

<li>
<p>NEC PC-9821Ra20, Rv20, Xv13, Xv20 internal 100Base-TX (PC-98)</p>
</li>

<li>
<p>NEC PC-9821X-B06 (PC-98)</p>
</li>

<li>
<p>Many on-board network interfaces on Intel motherboards</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=hme&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">hme</span>(4)</span></a> driver
supports the on-board Ethernet interfaces of many Sun UltraSPARC workstation and server
models. Cards supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=hme&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">hme</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Sun PCI SunSwift Adapter</p>
</li>

<li>
<p>Sun SBus SunSwift Adapter &#8220;( hme&#8221; and &#8220;SUNW,hme&#8221;)</p>
</li>

<li>
<p>Sun PCI Sun100BaseT Adapter 2.0</p>
</li>

<li>
<p>Sun SBus Sun100BaseT 2.0</p>
</li>

<li>
<p>Sun PCI Quad FastEthernet Controller</p>
</li>

<li>
<p>Sun SBus Quad FastEthernet Controller</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ie&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">ie</span>(4)</span></a> driver provides
supports the following 8 and 16bit ISA Ethernet cards that are based on the Intel i82586
chip:</p>

<ul>
<li>
<p>3COM 3C507</p>
</li>

<li>
<p>AT&amp;T EN100</p>
</li>

<li>
<p>AT&amp;T Starlan 10</p>
</li>

<li>
<p>AT&amp;T Starlan Fiber</p>
</li>

<li>
<p>Intel EtherExpress 16</p>
</li>

<li>
<p>RACAL Interlan NI5210</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ixgb&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ixgb</span>(4)</span></a> driver
supports the following cards:</p>

<ul>
<li>
<p>Intel PRO/10GbE LR Server Adapter</p>
</li>

<li>
<p>Intel PRO/10GbE SR Server Adapter</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=kue&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">kue</span>(4)</span></a> driver
supports Kawasaki LSI KL5KLUSB101B based USB Ethernet adapters including:</p>

<ul>
<li>
<p>3Com 3c19250</p>
</li>

<li>
<p>3Com 3c460 HomeConnect Ethernet USB Adapter</p>
</li>

<li>
<p>ADS Technologies USB-10BT</p>
</li>

<li>
<p>AOX USB101</p>
</li>

<li>
<p>ATen UC10T</p>
</li>

<li>
<p>Abocom URE 450</p>
</li>

<li>
<p>Corega USB-T</p>
</li>

<li>
<p>D-Link DSB-650C</p>
</li>

<li>
<p>Entrega NET-USB-E45, NET-HUB-3U1E</p>
</li>

<li>
<p>I/O Data USB ETT</p>
</li>

<li>
<p>Kawasaki DU-H3E</p>
</li>

<li>
<p>LinkSys USB10T</p>
</li>

<li>
<p>Netgear EA101</p>
</li>

<li>
<p>Peracom USB Ethernet Adapter</p>
</li>

<li>
<p>SMC 2102USB, 2104USB</p>
</li>
</ul>

<p>Adapters supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=lge&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">lge</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>SMC TigerCard 1000 (SMC9462SX)</p>
</li>

<li>
<p>D-Link DGE-500SX</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=lnc&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">lnc</span>(4)</span></a> driver
supports the following adapters:</p>

<ul>
<li>
<p>Diamond HomeFree</p>
</li>

<li>
<p>Digital DEPCA</p>
</li>

<li>
<p>Hewlett Packard Vectra 486/66XM</p>
</li>

<li>
<p>Hewlett Packard Vectra XU</p>
</li>

<li>
<p>Isolan AT 4141-0 (16 bit)</p>
</li>

<li>
<p>Isolan BICC</p>
</li>

<li>
<p>Isolink 4110 (8 bit)</p>
</li>

<li>
<p>Novell NE2100</p>
</li>

<li>
<p>Novell NE32-VL</p>
</li>
</ul>

<p>Also supported are adapters working with the pcn(4) driver. The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=lnc&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">lnc</span>(4)</span></a> driver
runs these in compatibility mode, thus the pcn(4) driver should be preferred.</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=my&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">my</span>(4)</span></a> driver provides
support for various NICs based on the Myson chipset. Supported models include:</p>

<ul>
<li>
<p>Myson MTD800 PCI Fast Ethernet chip</p>
</li>

<li>
<p>Myson MTD803 PCI Fast Ethernet chip</p>
</li>

<li>
<p>Myson MTD89X PCI Gigabit Ethernet chip</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=nge&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">nge</span>(4)</span></a> driver
supports National Semiconductor DP83820 and DP83821 based Gigabit Ethernet adapters
including:</p>

<ul>
<li>
<p>Addtron AEG320T</p>
</li>

<li>
<p>Ark PC SOHO-GA2500T (32-bit PCI) and SOHO-GA2000T (64-bit PCI)</p>
</li>

<li>
<p>Asante FriendlyNet GigaNIX 1000TA and 1000TPC</p>
</li>

<li>
<p>D-Link DGE-500T</p>
</li>

<li>
<p>LinkSys EG1032 (32-bit PCI) and EG1064 (64-bit PCI)</p>
</li>

<li>
<p>Netgear GA621</p>
</li>

<li>
<p>Netgear GA622T</p>
</li>

<li>
<p>SMC EZ Card 1000 (SMC9462TX)</p>
</li>

<li>
<p>Surecom Technology EP-320G-TX</p>
</li>

<li>
<p>Trendware TEG-PCITX (32-bit PCI) and TEG-PCITX2 (64-bit PCI)</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=nve&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">nve</span>(4)</span></a> driver
supports the NVIDIA MCP onboard adapters of mainboards with the following chipsets:</p>

<ul>
<li>
<p>nForce</p>
</li>

<li>
<p>nForce2</p>
</li>

<li>
<p>nForce3</p>
</li>

<li>
<p>nForce4</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=pcn&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">pcn</span>(4)</span></a> driver
supports adapters and embedded controllers based on the AMD PCnet/FAST, PCnet/FAST+,
PCnet/FAST III, PCnet/PRO and PCnet/Home Fast Ethernet chips:</p>

<ul>
<li>
<p>AMD Am53C974/Am79C970/Am79C974 PCnet-PCI</p>
</li>

<li>
<p>AMD Am79C970A PCnet-PCI II</p>
</li>

<li>
<p>AMD Am79C971 PCnet-FAST</p>
</li>

<li>
<p>AMD Am79C972 PCnet-FAST+</p>
</li>

<li>
<p>AMD Am79C973/Am79C975 PCnet-FAST III</p>
</li>

<li>
<p>AMD Am79C976 PCnet-PRO</p>
</li>

<li>
<p>AMD PCnet/Home HomePNA</p>
</li>

<li>
<p>Allied-Telesis LA-PCI</p>
</li>

<li>
<p>Contec C-NET(98)S (PC-98)</p>
</li>

<li>
<p>NEC SV-98/2-B05, B06</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=re&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">re</span>(4)</span></a> driver supports
RealTek RTL8139C+, RTL8169, RTL8169S and RTL8110S based Fast Ethernet and Gigabit
Ethernet adapters including:</p>

<ul>
<li>
<p>Alloy Computer Products EtherGOLD 1439E 10/100 (8139C+)</p>
</li>

<li>
<p>Compaq Evo N1015v Integrated Ethernet (8139C+)</p>
</li>

<li>
<p>Corega CG-LAPCIGT Gigabit Ethernet (8169S)</p>
</li>

<li>
<p>D-Link DGE-528(T) Gigabit Ethernet (8169S)</p>
</li>

<li>
<p>Gigabyte 7N400 Pro2 Integrated Gigabit Ethernet (8110S)</p>
</li>

<li>
<p>LevelOne GNC-0105T (8169S)</p>
</li>

<li>
<p>PLANEX COMMUNICATIONS Inc. GN-1200TC (8169S)</p>
</li>

<li>
<p>Xterasys XN-152 10/100/1000 NIC (8169)</p>
</li>
</ul>

<p>Adapters supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=rl&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">rl</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Accton &#8220;Cheetah&#8221; EN1207D (MPX 5030/5038; RealTek 8139 clone)</p>
</li>

<li>
<p>Allied Telesyn AT2550</p>
</li>

<li>
<p>Allied Telesyn AT2500TX</p>
</li>

<li>
<p>Belkin F5D5000</p>
</li>

<li>
<p>BUFFALO (Melco INC.) LPC-CB-CLX (CardBus)</p>
</li>

<li>
<p>Compaq HNE-300</p>
</li>

<li>
<p>CompUSA no-name 10/100 PCI Ethernet NIC</p>
</li>

<li>
<p>Corega FEther CB-TXD</p>
</li>

<li>
<p>Corega FEtherII CB-TXD</p>
</li>

<li>
<p>D-Link DFE-528TX</p>
</li>

<li>
<p>D-Link DFE-530TX+</p>
</li>

<li>
<p>D-Link DFE-538TX</p>
</li>

<li>
<p>D-Link DFE-690TXD</p>
</li>

<li>
<p>Edimax EP-4103DL CardBus</p>
</li>

<li>
<p>Encore ENL832-TX 10/100 M PCI</p>
</li>

<li>
<p>Farallon NetLINE 10/100 PCI</p>
</li>

<li>
<p>Genius GF100TXR</p>
</li>

<li>
<p>GigaFast Ethernet EE100-AXP</p>
</li>

<li>
<p>KTX-9130TX 10/100 Fast Ethernet</p>
</li>

<li>
<p>LevelOne FPC-0106TX</p>
</li>

<li>
<p>Longshine LCS-8038TX-R</p>
</li>

<li>
<p>NDC Communications NE100TX-E</p>
</li>

<li>
<p>Netronix Inc. EA-1210 NetEther 10/100</p>
</li>

<li>
<p>Nortel Networks 10/100BaseTX</p>
</li>

<li>
<p>OvisLink LEF-8129TX</p>
</li>

<li>
<p>OvisLink LEF-8139TX</p>
</li>

<li>
<p>Peppercon AG ROL-F</p>
</li>

<li>
<p>Planex FNW-3800-TX</p>
</li>

<li>
<p>SMC EZ Card 10/100 PCI 1211-TX</p>
</li>

<li>
<p>SOHO (PRAGMATIC) UE-1211C</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=rue&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">rue</span>(4)</span></a> driver
supports RealTek RTL8150 based USB Ethernet adapters including:</p>

<ul>
<li>
<p>Buffalo (Melco Inc.) LUA-KTX</p>
</li>

<li>
<p>Green House GH-USB100B</p>
</li>

<li>
<p>LinkSys USB100M</p>
</li>

<li>
<p>Billionton 10/100 FastEthernet USBKR2</p>
</li>
</ul>

<p>Adapters supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sf&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">sf</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>ANA-62011 64-bit single port 10/100baseTX adapter</p>
</li>

<li>
<p>ANA-62022 64-bit dual port 10/100baseTX adapter</p>
</li>

<li>
<p>ANA-62044 64-bit quad port 10/100baseTX adapter</p>
</li>

<li>
<p>ANA-69011 32-bit single port 10/100baseTX adapter</p>
</li>

<li>
<p>ANA-62020 64-bit single port 100baseFX adapter</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sis&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sis</span>(4)</span></a> driver
supports Silicon Integrated Systems SiS 900 and SiS 7016 based Fast Ethernet adapters and
embedded controllers, as well as Fast Ethernet adapters based on the National
Semiconductor DP83815 (MacPhyter) chip. Supported adapters include:</p>

<ul>
<li>
<p>@Nifty FNECHARD IFC USUP-TX</p>
</li>

<li>
<p>MELCO LGY-PCI-TXC</p>
</li>

<li>
<p>Netgear FA311-TX (DP83815)</p>
</li>

<li>
<p>Netgear FA312-TX (DP83815)</p>
</li>

<li>
<p>SiS 630, 635, and 735 motherboard chipsets</p>
</li>
</ul>

<p>Adapters supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sk&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">sk</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>3Com 3C940 single port, 1000baseT adapter</p>
</li>

<li>
<p>3Com 3C2000-T single port, 1000baseT adapter</p>
</li>

<li>
<p>Belkin F5D5005 single port, 1000baseT adapter</p>
</li>

<li>
<p>D-Link DGE-530T single port, 1000baseT adapter</p>
</li>

<li>
<p>Linksys EG1032 single port, 1000baseT adapter</p>
</li>

<li>
<p>SK-9521 SK-NET GE-T single port, 1000baseT adapter</p>
</li>

<li>
<p>SK-9821 SK-NET GE-T single port, 1000baseT adapter</p>
</li>

<li>
<p>SK-9822 SK-NET GE-T dual port, 1000baseT adapter</p>
</li>

<li>
<p>SK-9841 SK-NET GE-LX single port, single mode fiber adapter</p>
</li>

<li>
<p>SK-9842 SK-NET GE-LX dual port, single mode fiber adapter</p>
</li>

<li>
<p>SK-9843 SK-NET GE-SX single port, multimode fiber adapter</p>
</li>

<li>
<p>SK-9844 SK-NET GE-SX dual port, multimode fiber adapter</p>
</li>

<li>
<p>SMC 9452TX single port, 1000baseT adapter</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sn&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">sn</span>(4)</span></a> driver supports
SMC91Cxx based ISA and PCMCIA cards including:</p>

<ul>
<li>
<p>3Com Megahertz X-Jack Ethernet PC-Card XJ10BT</p>
</li>

<li>
<p>3Com Megahertz X-Jack Ethernet PC-Card XJ10BC</p>
</li>

<li>
<p>Farallon EtherMac PC Card 595a</p>
</li>

<li>
<p>Motorola Mariner Ethernet/Modem PC Card</p>
</li>

<li>
<p>Ositech Seven of Diamonds Ethernet PC Card</p>
</li>

<li>
<p>Ositech Jack of Hearts Ethernet/Modem PC Card</p>
</li>

<li>
<p>Psion Gold Card Netglobal Ethernet PC Card</p>
</li>

<li>
<p>Psion Gold Card Netglobal 10/100 Fast Ethernet PC Card</p>
</li>

<li>
<p>Psion Gold Card Netglobal 56k+10Mb Ethernet PC Card</p>
</li>

<li>
<p>SMC EZEther PC Card (8020BT)</p>
</li>

<li>
<p>SMC EZEther PC Card (8020T)</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sn&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">sn</span>(4)</span></a> driver supports
the SMC 91C90, SMC 91C92, SMC 91C94, SMC 91C95, SMC 91C96, SMC91C100 and SMC 91C100FD
chips from SMC. The Farallon EtherWave and EtherMac card came in two varieties. The ep(4)
driver supports the 595 and 895 cards. These cards have the blue arrow on the front along
with a 3Com logo. The Farallon 595a cards, which have a red arrow on the front, are also
called EtherWave and EtherMac. They are supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sn&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">sn</span>(4)</span></a> driver.</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ste&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ste</span>(4)</span></a> driver
supports Sundance Technologies ST201 based Fast Ethernet adapters and embedded
controllers including:</p>

<ul>
<li>
<p>D-Link DFE-530TXS</p>
</li>

<li>
<p>D-Link DFE-550TX</p>
</li>

<li>
<p>D-Link DFE-580TX</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ti&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">ti</span>(4)</span></a> driver supports
Gigabit Ethernet adapters based on the Alteon Tigon I and II chips. The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ti&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">ti</span>(4)</span></a> driver has been
tested with the following adapters:</p>

<ul>
<li>
<p>3Com 3c985-SX Gigabit Ethernet adapter (Tigon 1)</p>
</li>

<li>
<p>3Com 3c985B-SX Gigabit Ethernet adapter (Tigon 2)</p>
</li>

<li>
<p>Alteon AceNIC V Gigabit Ethernet adapter (1000baseSX)</p>
</li>

<li>
<p>Alteon AceNIC V Gigabit Ethernet adapter (1000baseT)</p>
</li>

<li>
<p>Digital EtherWORKS 1000SX PCI Gigabit adapter</p>
</li>

<li>
<p>Netgear GA620 Gigabit Ethernet adapter (1000baseSX)</p>
</li>

<li>
<p>Netgear GA620T Gigabit Ethernet adapter (1000baseT)</p>
</li>
</ul>

<p>The following adapters should also be supported but have not yet been tested:</p>

<ul>
<li>
<p>Asante GigaNIX1000T Gigabit Ethernet adapter</p>
</li>

<li>
<p>Asante PCI 1000BASE-SX Gigabit Ethernet adapter</p>
</li>

<li>
<p>Farallon PN9000SX Gigabit Ethernet adapter</p>
</li>

<li>
<p>NEC Gigabit Ethernet</p>
</li>

<li>
<p>Silicon Graphics PCI Gigabit Ethernet adapter</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=tl&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">tl</span>(4)</span></a> driver supports
Texas Instruments ThunderLAN based Ethernet and Fast Ethernet adapters including a large
number of Compaq PCI Ethernet adapters. Also supported are:</p>

<ul>
<li>
<p>Olicom OC-2135/2138 10/100 TX UTP adapter</p>
</li>

<li>
<p>Olicom OC-2325/OC-2326 10/100 TX UTP adapter</p>
</li>

<li>
<p>Racore 8148 10baseT/100baseTX/100baseFX adapter</p>
</li>

<li>
<p>Racore 8165 10/100baseTX adapter</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=tl&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">tl</span>(4)</span></a> driver also
supports the built-in Ethernet adapters of various Compaq Prosignia servers and Compaq
Deskpro desktop machines including:</p>

<ul>
<li>
<p>Compaq Netelligent 10</p>
</li>

<li>
<p>Compaq Netelligent 10 T PCI UTP/Coax</p>
</li>

<li>
<p>Compaq Netelligent 10/100</p>
</li>

<li>
<p>Compaq Netelligent 10/100 Dual-Port</p>
</li>

<li>
<p>Compaq Netelligent 10/100 Proliant</p>
</li>

<li>
<p>Compaq Netelligent 10/100 TX Embedded UTP</p>
</li>

<li>
<p>Compaq Netelligent 10/100 TX UTP</p>
</li>

<li>
<p>Compaq NetFlex 3P</p>
</li>

<li>
<p>Compaq NetFlex 3P Integrated</p>
</li>

<li>
<p>Compaq NetFlex 3P w/BNC</p>
</li>
</ul>

<p>SMC 83c17x (EPIC)-based Ethernet NICs (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=tx&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">tx</span>(4)</span></a> driver)</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=txp&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">txp</span>(4)</span></a> driver
supports the following cards:</p>

<ul>
<li>
<p>3Com 3CR990-TX-95</p>
</li>

<li>
<p>3Com 3CR990-TX-97</p>
</li>

<li>
<p>3Com 3cR990B-TXM</p>
</li>

<li>
<p>3Com 3CR990SVR95</p>
</li>

<li>
<p>3Com 3CR990SVR97</p>
</li>

<li>
<p>3Com 3cR990B-SRV</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=udav&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">udav</span>(4)</span></a> driver
supports the following adapters:</p>

<ul>
<li>
<p>Corega FEther USB-TXC</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=vge&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">vge</span>(4)</span></a> driver
supports VIA Networking VT3119 and VT6122 based Gigabit Ethernet adapters including:</p>

<ul>
<li>
<p>VIA Networking LAN-on-motherboard Gigabit Ethernet</p>
</li>

<li>
<p>ZyXEL GN650-T 64-bit PCI Gigabit Ethernet NIC (ZX1701)</p>
</li>

<li>
<p>ZyXEL GN670-T 32-bit PCI Gigabit Ethernet NIC (ZX1702)</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=vr&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">vr</span>(4)</span></a> driver supports
VIA Technologies Rhine I, Rhine II, and Rhine III based Fast Ethernet adapters
including:</p>

<ul>
<li>
<p>AOpen/Acer ALN-320</p>
</li>

<li>
<p>D-Link DFE530-TX</p>
</li>

<li>
<p>Hawking Technologies PN102TX</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=vx&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">vx</span>(4)</span></a> driver supports
the following cards:</p>

<ul>
<li>
<p>3Com 3c590 EtherLink III PCI</p>
</li>

<li>
<p>3Com 3c592 EtherLink III EISA</p>
</li>

<li>
<p>3Com 3c595 Fast EtherLink III PCI in 10 Mbps mode</p>
</li>

<li>
<p>3Com 3c597 Fast EtherLink III EISA in 10 Mbps mode</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=wb&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">wb</span>(4)</span></a> driver supports
Winbond W89C840F based Fast Ethernet adapters and embedded controllers including:</p>

<ul>
<li>
<p>Trendware TE100-PCIE</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=xe&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">xe</span>(4)</span></a> driver supports
the following cards:</p>

<ul>
<li>
<p>Xircom CreditCard Ethernet (PS-CE2-10)</p>
</li>

<li>
<p>Xircom CreditCard Ethernet + Modem 28 (PS-CEM-28)</p>
</li>

<li>
<p>Xircom CreditCard Ethernet + Modem 33 (CEM33)</p>
</li>

<li>
<p>Xircom CreditCard 10/100 (CE3, CE3B)</p>
</li>

<li>
<p>Xircom CreditCard Ethernet 10/100 + Modem 56 (CEM56)</p>
</li>

<li>
<p>Xircom RealPort Ethernet 10 (RE10)</p>
</li>

<li>
<p>Xircom RealPort Ethernet 10/100 (RE100)</p>
</li>

<li>
<p>Xircom RealPort Ethernet 10/100 + Modem 56 (REM56, REM56G)</p>
</li>

<li>
<p>Accton Fast EtherCard-16 (EN2226)</p>
</li>

<li>
<p>Compaq Microcom CPQ550 Ethernet/Modem PC Card</p>
</li>

<li>
<p>Compaq Netelligent 10/100 PC Card (CPQ-10/100)</p>
</li>

<li>
<p>Intel EtherExpress Pro/100 PC Card Mobile Adapter 16 (Pro/100 M16A)</p>
</li>

<li>
<p>Intel EtherExpress Pro/100 LAN/Modem PC Card Adapter (Pro/100 M16B)</p>
</li>
</ul>

<p>Other similar devices using the same hardware may also be supported.</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=xl&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">xl</span>(4)</span></a> driver supports
the following hardware:</p>

<ul>
<li>
<p>3Com 3c900-TPO</p>
</li>

<li>
<p>3Com 3c900-COMBO</p>
</li>

<li>
<p>3Com 3c905-TX</p>
</li>

<li>
<p>3Com 3c905-T4</p>
</li>

<li>
<p>3Com 3c900B-TPO</p>
</li>

<li>
<p>3Com 3c900B-TPC</p>
</li>

<li>
<p>3Com 3c900B-FL</p>
</li>

<li>
<p>3Com 3c900B-COMBO</p>
</li>

<li>
<p>3Com 3c905B-T4</p>
</li>

<li>
<p>3Com 3c905B-TX</p>
</li>

<li>
<p>3Com 3c905B-FX</p>
</li>

<li>
<p>3Com 3c905B-COMBO</p>
</li>

<li>
<p>3Com 3c905C-TX</p>
</li>

<li>
<p>3Com 3c980, 3c980B, and 3c980C server adapters</p>
</li>

<li>
<p>3Com 3cSOHO100-TX OfficeConnect adapters</p>
</li>

<li>
<p>3Com 3c450 HomeConnect adapters</p>
</li>

<li>
<p>3Com 3c555, 3c556 and 3c556B mini-PCI adapters</p>
</li>

<li>
<p>3Com 3C3SH573BT, 3C575TX, 3CCFE575BT, 3CXFE575BT, 3CCFE575CT, 3CXFE575CT, 3CCFEM656,
3CCFEM656B, and 3CCFEM656C, 3CXFEM656, 3CXFEM656B, and 3CXFEM656C CardBus adapters</p>
</li>

<li>
<p>3Com 3c905-TX, 3c905B-TX 3c905C-TX, 3c920B-EMB, and 3c920B-EMB-WNM embedded
adapters</p>
</li>
</ul>

<p>Both the 3C656 family of CardBus cards and the 3C556 family of MiniPCI cards have a
built-in proprietary modem. Neither the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=xl&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">xl</span>(4)</span></a> driver nor any
other driver supports this modem.</p>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="TOKENRING" name="TOKENRING">3.3 Token Ring Interfaces</a></h3>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=oltr&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">oltr</span>(4)</span></a> driver
supports the following ISA based Olicom Token Ring adapters:</p>

<ul>
<li>
<p>Olicom OC-3115</p>
</li>

<li>
<p>Olicom ISA 16/4 Adapter (OC-3117)</p>
</li>

<li>
<p>Olicom ISA 16/4 Adapter (OC-3118)</p>
</li>
</ul>

<p>The following PCI based adapters are supported:</p>

<ul>
<li>
<p>Olicom PCI 16/4 Adapter (OC-3136)</p>
</li>

<li>
<p>Olicom PCI/II 16/4 Adapter (OC-3137)</p>
</li>

<li>
<p>Olicom PCI 16/4 Adapter (OC-3139)</p>
</li>

<li>
<p>Olicom RapidFire 3140 16/4 PCI Adapter (OC-3140)</p>
</li>

<li>
<p>Olicom RapidFire 3141 Fiber Adapter (OC-3141)</p>
</li>

<li>
<p>Olicom RapidFire 3540 100/16/4 Adapter (OC-3540)</p>
</li>
</ul>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="FDDI" name="FDDI">3.4 FDDI Interfaces</a></h3>

<p>DEC DEFPA PCI (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=fpa&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">fpa</span>(4)</span></a>
driver)</p>

<p>DEC DEFEA EISA (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=fpa&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">fpa</span>(4)</span></a>
driver)</p>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="ATM" name="ATM">3.5 ATM Interfaces</a></h3>

<p>Midway-based ATM interfaces (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=en&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">en</span>(4)</span></a> driver)</p>

<p>FORE Systems, Inc. PCA-200E ATM PCI Adapters (hfa and <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=fatm&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">fatm</span>(4)</span></a>
drivers)</p>

<p>IDT NICStAR 77201/211-based ATM Adapters (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=idt&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">idt</span>(4)</span></a>
driver)</p>

<p>FORE Systems, Inc. HE155 and HE622 ATM interfaces (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=hatm&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">hatm</span>(4)</span></a>
driver)</p>

<p>IDT77252-based ATM cards (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=patm&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">patm</span>(4)</span></a>
driver)</p>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="WLAN" name="WLAN">3.6 Wireless Network Interfaces</a></h3>

<p>NCR / AT&amp;T / Lucent Technologies WaveLan T1-speed ISA/radio LAN cards (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=wl&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">wl</span>(4)</span></a> driver)</p>

<p>Lucent Technologies WaveLAN/IEEE 802.11b wireless network adapters and workalikes
using the Lucent Hermes, Intersil PRISM-II, Intersil PRISM-2.5, Intersil Prism-3, and
Symbol Spectrum24 chipsets (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=wi&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">wi</span>(4)</span></a> driver)</p>

<p>Cisco/Aironet 802.11b wireless adapters (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=an&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">an</span>(4)</span></a> driver)</p>

<p>Raytheon Raylink 2.4GHz wireless adapters (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ray&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ray</span>(4)</span></a>
driver)</p>

<p>Cards supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=awi&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">awi</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>BayStack 650</p>
</li>

<li>
<p>BayStack 660</p>
</li>

<li>
<p>Icom SL-200</p>
</li>

<li>
<p>Melco WLI-PCM</p>
</li>

<li>
<p>NEL SSMagic</p>
</li>

<li>
<p>Netwave AirSurfer Plus</p>
</li>

<li>
<p>Netwave AirSurfer Pro</p>
</li>

<li>
<p>Nokia C020 WLAN</p>
</li>

<li>
<p>Farallon SkyLINE</p>
</li>
</ul>

<p>The original Xircom Netwave AirSurfer is supported by the cnw(4) driver.</p>

<p>Cards supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=cnw&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">cnw</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>Xircom CreditCard Netwave</p>
</li>

<li>
<p>NetWave AirSurfer</p>
</li>
</ul>

<p>The following cards are among those supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ath&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ath</span>(4)</span></a>
driver:</p>

<ul>
<li>
<p>Aztech WL830PC</p>
</li>

<li>
<p>Cisco AIR-CB21AG</p>
</li>

<li>
<p>Cisco AIR-PI21AG</p>
</li>

<li>
<p>D-Link DWL-A650</p>
</li>

<li>
<p>D-Link DWL-AB650</p>
</li>

<li>
<p>D-Link DWL-A520</p>
</li>

<li>
<p>D-Link DWL-AG520</p>
</li>

<li>
<p>D-Link DWL-AG650</p>
</li>

<li>
<p>D-Link DWL-G520B</p>
</li>

<li>
<p>D-Link DWL-G650B</p>
</li>

<li>
<p>Elecom LD-WL54AG</p>
</li>

<li>
<p>Elecom LD-WL54</p>
</li>

<li>
<p>Fujitsu E5454</p>
</li>

<li>
<p>Fujitsu FMV-JW481</p>
</li>

<li>
<p>Fujitsu E5454</p>
</li>

<li>
<p>HP NC4000</p>
</li>

<li>
<p>I/O Data WN-AB</p>
</li>

<li>
<p>I/O Data WN-AG</p>
</li>

<li>
<p>I/O Data WN-A54</p>
</li>

<li>
<p>Linksys WMP55AG</p>
</li>

<li>
<p>Linksys WPC51AB</p>
</li>

<li>
<p>Linksys WPC55AG</p>
</li>

<li>
<p>NEC PA-WL/54AG</p>
</li>

<li>
<p>Netgear WAG311</p>
</li>

<li>
<p>Netgear WAB501</p>
</li>

<li>
<p>Netgear WAG511</p>
</li>

<li>
<p>Netgear WG311T</p>
</li>

<li>
<p>Netgear WG511T</p>
</li>

<li>
<p>Orinoco 8480</p>
</li>

<li>
<p>Orinoco 8470WD</p>
</li>

<li>
<p>Proxim Skyline 4030</p>
</li>

<li>
<p>Proxim Skyline 4032</p>
</li>

<li>
<p>Samsung SWL-5200N</p>
</li>

<li>
<p>SMC SMC2536W-AG</p>
</li>

<li>
<p>SMC SMC2735W</p>
</li>

<li>
<p>Sony PCWA-C700</p>
</li>

<li>
<p>Sony PCWA-C300S</p>
</li>

<li>
<p>Sony PCWA-C500</p>
</li>

<li>
<p>3Com 3CRPAG175</p>
</li>
</ul>

<p>An up to date list can be found at <a
href="http://customerproducts.atheros.com/customerproducts"
target="_top">http://customerproducts.atheros.com/customerproducts</a>.</p>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="MISC-NETWORK" name="MISC-NETWORK">3.7 Miscellaneous
Networks</a></h3>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=cx&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">cx</span>(4)</span></a> driver supports
the following cards:</p>

<ul>
<li>
<p>Cronyx Sigma-22, Sigma-24</p>
</li>

<li>
<p>Cronyx Sigma-100</p>
</li>

<li>
<p>Cronyx Sigma-400, Sigma-401, Sigma-404, Sigma-410, Sigma-440</p>
</li>

<li>
<p>Cronyx Sigma-500</p>
</li>

<li>
<p>Cronyx Sigma-703</p>
</li>

<li>
<p>Cronyx Sigma-800, Sigma-801, Sigma-810, Sigma-840</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=cp&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">cp</span>(4)</span></a> driver supports
the following models of Tau-PCI WAN adapters:</p>

<ul>
<li>
<p>Cronyx Tau-PCI</p>
</li>

<li>
<p>Cronyx Tau-PCI/R</p>
</li>

<li>
<p>Cronyx Tau-PCI-L</p>
</li>

<li>
<p>Cronyx Tau-PCI-L/R</p>
</li>

<li>
<p>Cronyx Tau-PCI-E1</p>
</li>

<li>
<p>Cronyx Tau-PCI-G703</p>
</li>

<li>
<p>Cronyx Tau-PCI-2E1</p>
</li>

<li>
<p>Cronyx Tau-PCI-4E1</p>
</li>

<li>
<p>Cronyx Tau-PCI-E3</p>
</li>

<li>
<p>Cronyx Tau-PCI-T3</p>
</li>

<li>
<p>Cronyx Tau-PCI-STS1</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ctau&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ctau</span>(4)</span></a> driver
supports the following cards:</p>

<ul>
<li>
<p>Cronyx Tau (RS-232/V.35)</p>
</li>

<li>
<p>Cronyx Tau/R (RS-530/RS-449)</p>
</li>

<li>
<p>Cronyx Tau/E1 (fractional E1)</p>
</li>

<li>
<p>Cronyx Tau/G703 (unframed E1)</p>
</li>
</ul>

<p>Granch SBNI12 point-to-point communications adapters (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sbni&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sbni</span>(4)</span></a>
driver)</p>

<p>Granch SBNI16 SHDSL modems (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sbsh&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sbsh</span>(4)</span></a>
driver)</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=cm&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">cm</span>(4)</span></a> driver supports
the following card models:</p>

<ul>
<li>
<p>SMC90c26</p>
</li>

<li>
<p>SMC90c56</p>
</li>

<li>
<p>SMC90c66 in '56 compatibility mode.</p>
</li>
</ul>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="ISDN" name="ISDN">3.8 ISDN Interfaces</a></h3>

<p>AcerISDN P10 ISA PnP (experimental)</p>

<p>Asuscom ISDNlink 128K ISA</p>

<p>ASUSCOM P-IN100-ST-D (and other Winbond W6692-based cards)</p>

<p>AVM</p>

<ul>
<li>
<p>A1</p>
</li>

<li>
<p>B1 ISA (tested with V2.0)</p>
</li>

<li>
<p>B1 PCI (tested with V4.0)</p>
</li>

<li>
<p>Fritz!Card classic</p>
</li>

<li>
<p>Fritz!Card PnP</p>
</li>

<li>
<p>Fritz!Card PCI</p>
</li>

<li>
<p>Fritz!Card PCI, Version 2</p>
</li>

<li>
<p>T1</p>
</li>
</ul>

<br />
<br />
<p>Creatix</p>

<ul>
<li>
<p>ISDN-S0</p>
</li>

<li>
<p>ISDN-S0 P&amp;P</p>
</li>
</ul>

<br />
<br />
<p>Compaq Microcom 610 ISDN (Compaq series PSB2222I) ISA PnP</p>

<p>Dr. Neuhaus Niccy Go@ and compatibles</p>

<p>Dynalink IS64PPH and IS64PPH+</p>

<p>Eicon Diehl DIVA 2.0 and 2.02</p>

<p>ELSA</p>

<ul>
<li>
<p>ELSA PCC-16</p>
</li>

<li>
<p>QuickStep 1000pro ISA</p>
</li>

<li>
<p>MicroLink ISDN/PCI</p>
</li>

<li>
<p>QuickStep 1000pro PCI</p>
</li>
</ul>

<br />
<br />
<p>ITK ix1 Micro ( &lt; V.3, non-PnP version )</p>

<p>Sedlbauer Win Speed</p>

<p>Siemens I-Surf 2.0</p>

<p>TELEINT ISDN SPEED No.1 (experimental)</p>

<p>Teles</p>

<ul>
<li>
<p>S0/8</p>
</li>

<li>
<p>S0/16</p>
</li>

<li>
<p>S0/16.3</p>
</li>

<li>
<p>S0/16.3 PnP</p>
</li>

<li>
<p>16.3c ISA PnP (experimental)</p>
</li>

<li>
<p>Teles PCI-TJ</p>
</li>
</ul>

<br />
<br />
<p>Traverse Technologies NETjet-S PCI</p>

<p>USRobotics Sportster ISDN TA intern</p>

<p>Winbond W6692 based PCI cards</p>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="SERIAL" name="SERIAL">3.9 Serial Interfaces</a></h3>

<p>&#8220;PC standard&#8221; 8250, 16450, and 16550-based serial ports (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sio&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sio</span>(4)</span></a>
driver)</p>

<p>AST 4 port serial card using shared IRQ</p>

<p>ARNET serial cards (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ar&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">ar</span>(4)</span></a> driver)</p>

<ul>
<li>
<p>ARNET 8 port serial card using shared IRQ</p>
</li>

<li>
<p>ARNET (now Digiboard) Sync 570/i high-speed serial</p>
</li>
</ul>

<br />
<br />
<p>Boca multi-port serial cards</p>

<ul>
<li>
<p>Boca BB1004 4-Port serial card (Modems <span class="emphasis"><i
class="EMPHASIS">not</i></span> supported)</p>
</li>

<li>
<p>Boca IOAT66 6-Port serial card (Modems supported)</p>
</li>

<li>
<p>Boca BB1008 8-Port serial card (Modems <span class="emphasis"><i
class="EMPHASIS">not</i></span> supported)</p>
</li>

<li>
<p>Boca BB2016 16-Port serial card (Modems supported)</p>
</li>
</ul>

<br />
<br />
<p>Comtrol Rocketport card (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=rp&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">rp</span>(4)</span></a> driver)</p>

<p>Cyclades Cyclom-Y serial board (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=cy&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">cy</span>(4)</span></a> driver)</p>

<p>STB 4 port card using shared IRQ</p>

<p>DigiBoard intelligent serial cards (digi driver)</p>

<p>PCI-Based multi-port serial boards (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=puc&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">puc</span>(4)</span></a>
driver)</p>

<ul>
<li>
<p>Actiontech 56K PCI</p>
</li>

<li>
<p>Avlab Technology, PCI IO 2S and PCI IO 4S</p>
</li>

<li>
<p>Comtrol RocketPort 550</p>
</li>

<li>
<p>Decision Computers PCCOM 4-port serial and dual port RS232/422/485</p>
</li>

<li>
<p>Dolphin Peripherals 4025/4035/4036</p>
</li>

<li>
<p>IC Book Labs Dreadnought 16x Lite and Pro</p>
</li>

<li>
<p>Lava Computers 2SP-PCI/DSerial-PCI/Quattro-PCI/Octopus-550</p>
</li>

<li>
<p>Middle Digital, Weasle serial port</p>
</li>

<li>
<p>Moxa Industio CP-114, Smartio C104H-PCI and C168H/PCI</p>
</li>

<li>
<p>NEC PK-UG-X001 and PK-UG-X008</p>
</li>

<li>
<p>Netmos NM9835 PCI-2S-550</p>
</li>

<li>
<p>Oxford Semiconductor OX16PCI954 PCI UART</p>
</li>

<li>
<p>Syba Tech SD-LAB PCI-4S2P-550-ECP</p>
</li>

<li>
<p>SIIG Cyber I/O PCI 16C550/16C650/16C850</p>
</li>

<li>
<p>SIIG Cyber 2P1S PCI 16C550/16C650/16C850</p>
</li>

<li>
<p>SIIG Cyber 2S1P PCI 16C550/16C650/16C850</p>
</li>

<li>
<p>SIIG Cyber 4S PCI 16C550/16C650/16C850</p>
</li>

<li>
<p>SIIG Cyber Serial (Single and Dual) PCI 16C550/16C650/16C850</p>
</li>

<li>
<p>Syba Tech Ltd. PCI-4S2P-550-ECP</p>
</li>

<li>
<p>Titan PCI-200H and PCI-800H</p>
</li>

<li>
<p>US Robotics (3Com) 3CP5609 modem</p>
</li>

<li>
<p>VScom PCI-400 and PCI-800</p>
</li>
</ul>

<br />
<br />
<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=rc&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">rc</span>(4)</span></a> driver provides
support for the SDL Communications RISCom/8 boards.</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sr&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">sr</span>(4)</span></a> driver supports
the following hardware:</p>

<ul>
<li>
<p>SDL Communications RISCom/N2 ISA</p>
</li>

<li>
<p>SDL Communications N2pci</p>
</li>

<li>
<p>SDL Communications WANic 400/405 PCI</p>
</li>
</ul>

<p>Specialix SI/XIO/SX multiport serial cards, with both the older SIHOST2.x and the new
&#8220;enhanced&#8221; (transputer based, aka JET) host cards (ISA, EISA and PCI are
supported) (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=si&sektion=4&manpath=FreeBSD+6.0-RELEASE"><span
 class="CITEREFENTRY"><span class="REFENTRYTITLE">si</span>(4)</span></a> driver)</p>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="SOUND" name="SOUND">3.10 Sound Devices</a></h3>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sound&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sound</span>(4)</span></a> driver
supports the following sound cards:</p>

<ul>
<li>
<p>CS4231, CS4232, CS4236, CS4237 (ISA)</p>
</li>

<li>
<p>Creative Labs SoundBlaster PCI</p>
</li>

<li>
<p>Intel 443MX, 810, 815, and 815E integrated sound devices</p>
</li>

<li>
<p>MSS/WSS Compatible DSPs</p>
</li>

<li>
<p>OPTi931/82C931 (ISA)</p>
</li>

<li>
<p>Yamaha OPL-SAx (ISA)</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_ad1816&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_ad1816</span>(4)</span></a>
driver supports the following sound cards:</p>

<ul>
<li>
<p>Analog Devices AD1816</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_als4000&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_als4000</span>(4)</span></a>
driver supports the following sound cards:</p>

<ul>
<li>
<p>Advance Logic ALS4000</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_cmi&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_cmi</span>(4)</span></a>
driver supports the following sound cards:</p>

<ul>
<li>
<p>CMedia CMI8338A</p>
</li>

<li>
<p>CMedia CMI8338B</p>
</li>

<li>
<p>CMedia CMI8738</p>
</li>

<li>
<p>CMedia CMI8738B</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_cs4281&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_cs4281</span>(4)</span></a>
driver supports the following sound cards:</p>

<ul>
<li>
<p>Crystal Semiconductor CS4281</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_csa&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_csa</span>(4)</span></a>
driver supports the following sound cards:</p>

<ul>
<li>
<p>Crystal Semiconductor CS4280</p>
</li>

<li>
<p>Crystal Semiconductor CS4610</p>
</li>

<li>
<p>Crystal Semiconductor CS4611</p>
</li>

<li>
<p>Crystal Semiconductor CS4614</p>
</li>

<li>
<p>Crystal Semiconductor CS4615</p>
</li>

<li>
<p>Crystal Semiconductor CS4622</p>
</li>

<li>
<p>Crystal Semiconductor CS4624</p>
</li>

<li>
<p>Crystal Semiconductor CS4630</p>
</li>

<li>
<p>Genius Soundmaker 128 Value</p>
</li>

<li>
<p>Hercules Game Theatre XP</p>
</li>

<li>
<p>Turtle Beach Santa Cruz</p>
</li>
</ul>

<p>Some onboard CS4610 chips are accompanied by the CS423x ISA codec instead of the
CS4297 AC97 codec. Such configurations are not supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_csa&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_csa</span>(4)</span></a>
driver yet.</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_ds1&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_ds1</span>(4)</span></a>
driver supports the following sound cards:</p>

<ul>
<li>
<p>Yamaha DS-1</p>
</li>

<li>
<p>Yamaha DS-1E</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_emu10k1&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_emu10k1</span>(4)</span></a>
driver supports the following sound cards:</p>

<ul>
<li>
<p>Creative SoundBlaster Live! (EMU10K1 Chipset)</p>
</li>

<li>
<p>Creative SoundBlaster Audigy (EMU10K2 Chipset)</p>
</li>

<li>
<p>Creative SoundBlaster Audigy 2 (EMU10K2 Chipset)</p>
</li>

<li>
<p>Creative SoundBlaster Audigy 2 (EMU10K3 Chipset)</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_es137x&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_es137x</span>(4)</span></a>
driver supports the following sound cards:</p>

<ul>
<li>
<p>Creative CT5880-A</p>
</li>

<li>
<p>Creative CT5880-C</p>
</li>

<li>
<p>Creative CT5880-D</p>
</li>

<li>
<p>Creative CT5880-E</p>
</li>

<li>
<p>Creative SB AudioPCI CT4730</p>
</li>

<li>
<p>Ensoniq AudioPCI ES1370</p>
</li>

<li>
<p>Ensoniq AudioPCI ES1371-A</p>
</li>

<li>
<p>Ensoniq AudioPCI ES1371-B</p>
</li>

<li>
<p>Ensoniq AudioPCI ES1373-A</p>
</li>

<li>
<p>Ensoniq AudioPCI ES1373-B</p>
</li>

<li>
<p>Ensoniq AudioPCI ES1373-8</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_ess&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_ess</span>(4)</span></a>
driver supports the following sound cards:</p>

<ul>
<li>
<p>Ensoniq ESS ISA PnP/non-PnP</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_fm801&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_fm801</span>(4)</span></a>
driver supports audio devices based on the following chipset:</p>

<ul>
<li>
<p>Forte Media FM801</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_gusc&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_gusc</span>(4)</span></a>
driver supports the following sound cards:</p>

<ul>
<li>
<p>Gravis UltraSound MAX</p>
</li>

<li>
<p>Gravis UltraSound PnP</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_ich&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_ich</span>(4)</span></a>
driver supports the following audio devices:</p>

<ul>
<li>
<p>AMD 768</p>
</li>

<li>
<p>AMD 8111</p>
</li>

<li>
<p>Intel 443MX</p>
</li>

<li>
<p>Intel ICH</p>
</li>

<li>
<p>Intel ICH revision 1</p>
</li>

<li>
<p>Intel ICH2</p>
</li>

<li>
<p>Intel ICH3</p>
</li>

<li>
<p>Intel ICH4</p>
</li>

<li>
<p>Intel ICH5</p>
</li>

<li>
<p>Intel ICH6</p>
</li>

<li>
<p>NVIDIA nForce</p>
</li>

<li>
<p>NVIDIA nForce2</p>
</li>

<li>
<p>NVIDIA nForce2 400</p>
</li>

<li>
<p>NVIDIA nForce3</p>
</li>

<li>
<p>NVIDIA nForce3 250</p>
</li>

<li>
<p>NVIDIA nForce4</p>
</li>

<li>
<p>SiS 7012</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_maestro&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_maestro</span>(4)</span></a>
driver supports the following PCI sound cards:</p>

<ul>
<li>
<p>ESS Technology Maestro-1</p>
</li>

<li>
<p>ESS Technology Maestro-2</p>
</li>

<li>
<p>ESS Technology Maestro-2E</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_maestro3&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_maestro3</span>(4)</span></a>
driver supports the following audio devices:</p>

<ul>
<li>
<p>ESS Technology Allegro-1</p>
</li>

<li>
<p>ESS Technology Maestro3</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_neomagic&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_neomagic</span>(4)</span></a>
driver supports the following audio devices:</p>

<ul>
<li>
<p>NeoMagic 256AV</p>
</li>

<li>
<p>NeoMagic 256ZX</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_sbc&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_sbc</span>(4)</span></a>
driver supports the following sound cards:</p>

<ul>
<li>
<p>Avance Asound 110</p>
</li>

<li>
<p>Avance Logic ALS100+</p>
</li>

<li>
<p>Avance Logic ALS120</p>
</li>

<li>
<p>Creative SB16</p>
</li>

<li>
<p>Creative SB32</p>
</li>

<li>
<p>Creative AWE64</p>
</li>

<li>
<p>Creative AWE64 Gold</p>
</li>

<li>
<p>Creative ViBRA16C</p>
</li>

<li>
<p>Creative ViBRA16X</p>
</li>

<li>
<p>ESS ES1681</p>
</li>

<li>
<p>ESS ES1688</p>
</li>

<li>
<p>ESS ES1868</p>
</li>

<li>
<p>ESS ES1869</p>
</li>

<li>
<p>ESS ES1878</p>
</li>

<li>
<p>ESS ES1879</p>
</li>

<li>
<p>ESS ES1888</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_solo&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_solo</span>(4)</span></a>
driver supports the following sound cards:</p>

<ul>
<li>
<p>ESS Solo-1 (ES1938 Chipset)</p>
</li>

<li>
<p>ESS Solo-1E (ES1946 Chipset)</p>
</li>
</ul>

<p>Note that older ESS ISA cards with ES18xx chipset are supported via snd_ess(4) and/or
snd_sbc(4).</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_t4dwave&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_t4dwave</span>(4)</span></a>
driver supports the following audio devices:</p>

<ul>
<li>
<p>Acer Labs M5451</p>
</li>

<li>
<p>SIS 7018</p>
</li>

<li>
<p>Trident 4DWave DX</p>
</li>

<li>
<p>Trident 4DWave NX</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_via8233&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_via8233</span>(4)</span></a>
driver supports the following audio chipsets:</p>

<ul>
<li>
<p>VIA VT8233</p>
</li>

<li>
<p>VIA VT8233A</p>
</li>

<li>
<p>VIA VT8233C</p>
</li>

<li>
<p>VIA VT8235</p>
</li>

<li>
<p>VIA VT8237</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_via82c686&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_via82c686</span>(4)</span></a>
driver supports audio devices based on the following chipset:</p>

<ul>
<li>
<p>VIA 82C686A</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=snd_vibes&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">snd_vibes</span>(4)</span></a>
driver supports audio devices based on the following chipset:</p>

<ul>
<li>
<p>S3 SonicVibes</p>
</li>
</ul>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="CAMERA" name="CAMERA">3.11 Camera and Video Capture
Devices</a></h3>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=bktr&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">bktr</span>(4)</span></a> driver
supports video capture cards based on the Brooktree Bt848/849/878/879 chips, as well as
Pinnacle PCTV cards, including:</p>

<ul>
<li>
<p>AOpen VA1000</p>
</li>

<li>
<p>AVerMedia AVerTV Studio</p>
</li>

<li>
<p>AVerMedia TF/FM-98</p>
</li>

<li>
<p>ATI TV Wonder VE</p>
</li>

<li>
<p>Hauppauge WinCast/TV</p>
</li>

<li>
<p>Hauppauge WinTV-Go-FM</p>
</li>

<li>
<p>Hauppauge WinTV-pci</p>
</li>

<li>
<p>Hauppauge WinTV-radio</p>
</li>

<li>
<p>Intel Smart Video Recorder III</p>
</li>

<li>
<p>KWORLD PCI TV Tuner</p>
</li>

<li>
<p>Miro PC TV</p>
</li>

<li>
<p>Pinnacle PCTV Pro</p>
</li>

<li>
<p>Pinnacle PCTV Rave</p>
</li>

<li>
<p>PixelView PlayTV PAK</p>
</li>

<li>
<p>SIGMA TV II</p>
</li>

<li>
<p>STB TV PCI Television Tuner</p>
</li>

<li>
<p>Super TV Tuner</p>
</li>

<li>
<p>V-Stream XPERT TV-PVR 878</p>
</li>

<li>
<p>Video Highway XTreme</p>
</li>

<li>
<p>VideoLogic Captivator PCI</p>
</li>
</ul>

<p>Connectix QuickCam</p>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="USB" name="USB">3.12 USB Devices</a></h3>

<p>A range of USB peripherals are supported; devices known to work are listed in this
section. Owing to the generic nature of most USB devices, with some exceptions any device
of a given class will be supported, even if not explicitly listed here.</p>

<div class="NOTE">
<blockquote class="NOTE">
<p><b>Note:</b> USB Ethernet adapters can be found in the section listing <a
href="#ETHERNET">Ethernet interfaces</a>.</p>
</blockquote>
</div>

<div class="NOTE">
<blockquote class="NOTE">
<p><b>Note:</b> USB Bluetooth adapters can be found in <a href="#BLUETOOTH">Bluetooth</a>
section.</p>
</blockquote>
</div>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ohci&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ohci</span>(4)</span></a> driver
supports all OHCI v1.0 compliant controllers including:</p>

<ul>
<li>
<p>AcerLabs M5237 (Aladdin-V)</p>
</li>

<li>
<p>AMD-756</p>
</li>

<li>
<p>OPTi 82C861 (FireLink)</p>
</li>

<li>
<p>NEC uPD 9210</p>
</li>

<li>
<p>CMD Tech 670 (USB0670)</p>
</li>

<li>
<p>CMD Tech 673 (USB0673)</p>
</li>

<li>
<p>NVIDIA nForce3</p>
</li>

<li>
<p>Sun PCIO-2 (RIO USB)</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=uhci&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">uhci</span>(4)</span></a> driver
supports all UHCI v1.1 compliant controllers including:</p>

<ul>
<li>
<p>Intel 82371AB/EB (PIIX4)</p>
</li>

<li>
<p>Intel 82371SB (PIIX3)</p>
</li>

<li>
<p>VIA 83C572</p>
</li>
</ul>

<p>USB 2.0 controllers using the EHCI interface (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ehci&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ehci</span>(4)</span></a>
driver)</p>

<p>Hubs</p>

<p>Keyboards (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ukbd&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ukbd</span>(4)</span></a>
driver)</p>

<p>Miscellaneous</p>

<ul>
<li>
<p>Assist Computer Systems PC Camera C-M1</p>
</li>

<li>
<p>ActiveWire I/O Board</p>
</li>

<li>
<p>Creative Technology Video Blaster WebCam Plus</p>
</li>

<li>
<p>D-Link DSB-R100 USB Radio (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ufm&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ufm</span>(4)</span></a>
driver)</p>
</li>

<li>
<p>Mirunet AlphaCam Plus</p>
</li>
</ul>

<br />
<br />
<p>The following devices are supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=urio&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">urio</span>(4)</span></a>
driver:</p>

<ul>
<li>
<p>Diamond MultiMedia Rio 500</p>
</li>

<li>
<p>Diamond MultiMedia Rio 600</p>
</li>

<li>
<p>Diamond MultiMedia Rio 800</p>
</li>
</ul>

<p>Devices supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=umodem&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">umodem</span>(4)</span></a> driver
include:</p>

<ul>
<li>
<p>3Com 5605</p>
</li>

<li>
<p>Metricom Ricochet GS USB wireless modem</p>
</li>

<li>
<p>Yamaha Broadband Wireless Router RTW65b</p>
</li>

<li>
<p>ELSA MicroLink 56k USB modem</p>
</li>
</ul>

<p>Mice (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ums&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ums</span>(4)</span></a>
driver)</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ulpt&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ulpt</span>(4)</span></a> driver
provides support for USB printers and parallel printer conversion cables, including the
following:</p>

<ul>
<li>
<p>ATen parallel printer adapter</p>
</li>

<li>
<p>Belkin F5U002 parallel printer adapter</p>
</li>

<li>
<p>Canon BJ F850, S600</p>
</li>

<li>
<p>Canon LBP-1310, 350</p>
</li>

<li>
<p>Entrega USB-to-parallel printer adapter</p>
</li>

<li>
<p>Hewlett-Packard HP Deskjet 3420 (P/N: C8947A #ABJ)</p>
</li>

<li>
<p>Oki Data MICROLINE ML660PS</p>
</li>

<li>
<p>Seiko Epson PM-900C, 880C, 820C, 730C</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ubsa&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ubsa</span>(4)</span></a> driver
supports the following adapters:</p>

<ul>
<li>
<p>Belkin F5U103</p>
</li>

<li>
<p>Belkin F5U120</p>
</li>

<li>
<p>e-Tek Labs Kwik232</p>
</li>

<li>
<p>GoHubs GoCOM232</p>
</li>

<li>
<p>Peracom single port serial adapter</p>
</li>

<li>
<p>Vodafone Mobile Connect 3G datacard</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ubser&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ubser</span>(4)</span></a> driver
provides support for the BWCT console management serial adapters.</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=uftdi&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">uftdi</span>(4)</span></a> driver
supports the following adapters:</p>

<ul>
<li>
<p>B&amp;B Electronics USB-&#62;RS422/485 adapter</p>
</li>

<li>
<p>HP USB-Serial adapter shipped with some HP laptops</p>
</li>

<li>
<p>Inland UAS111</p>
</li>

<li>
<p>QVS USC-1000</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=uplcom&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">uplcom</span>(4)</span></a> driver
supports the following adapters:</p>

<ul>
<li>
<p>ATEN UC-232A</p>
</li>

<li>
<p>BAFO BF-800</p>
</li>

<li>
<p>BAFO BF-810</p>
</li>

<li>
<p>ELECOM UC-SGT</p>
</li>

<li>
<p>HAL Corporation Crossam2+USB IR commander</p>
</li>

<li>
<p>Hama USB RS-232 Serial Adapter</p>
</li>

<li>
<p>IOGEAR UC-232A</p>
</li>

<li>
<p>I/O DATA USB-RSAQ</p>
</li>

<li>
<p>I/O DATA USB-RSAQ2</p>
</li>

<li>
<p>I/O DATA USB-RSAQ3</p>
</li>

<li>
<p>PLANEX USB-RS232 URS-03</p>
</li>

<li>
<p>RATOC REX-USB60</p>
</li>

<li>
<p>Sandberg USB to Serial Link (model number 133-08)</p>
</li>

<li>
<p>SOURCENEXT KeikaiDenwa 8 (with and without charger)</p>
</li>

<li>
<p>Sony Ericsson USB Cable (Susteen USB Data Cable)</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=umct&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">umct</span>(4)</span></a> driver
supports the following adapters:</p>

<ul>
<li>
<p>Belkin F5U109</p>
</li>

<li>
<p>Belkin F5U409</p>
</li>

<li>
<p>D-Link DU-H3SP USB BAY Hub</p>
</li>

<li>
<p>Magic Control Technology USB-232</p>
</li>

<li>
<p>Sitecom USB-232</p>
</li>
</ul>

<p>The following devices are supported by the <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=uscanner&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">uscanner</span>(4)</span></a>
driver:</p>

<ul>
<li>
<p>Acer Acerscan 320U</p>
</li>

<li>
<p>Acer Acerscan 620U</p>
</li>

<li>
<p>Acer Acerscan 640U</p>
</li>

<li>
<p>Acer Acerscan C310U</p>
</li>

<li>
<p>AGFA SnapScan 1212U</p>
</li>

<li>
<p>AGFA SnapScan 1236U</p>
</li>

<li>
<p>AGFA SnapScan e20</p>
</li>

<li>
<p>AGFA SnapScan e25</p>
</li>

<li>
<p>AGFA SnapScan e26</p>
</li>

<li>
<p>AGFA SnapScan e40</p>
</li>

<li>
<p>AGFA SnapScan e50</p>
</li>

<li>
<p>AGFA SnapScan e52</p>
</li>

<li>
<p>AGFA SnapScan Touch</p>
</li>

<li>
<p>Avision 1200U</p>
</li>

<li>
<p>Canon CanoScan N656U</p>
</li>

<li>
<p>Canon CanoScan N676U</p>
</li>

<li>
<p>Canon CanoScan N1220U</p>
</li>

<li>
<p>Canon CanoScan LIDE 20</p>
</li>

<li>
<p>Canon CanoScan LIDE 30</p>
</li>

<li>
<p>Epson Perfection 610</p>
</li>

<li>
<p>Epson Perfection 636U / 636Photo</p>
</li>

<li>
<p>Epson Perfection 640U</p>
</li>

<li>
<p>Epson Perfection 1200U / 1200Photo</p>
</li>

<li>
<p>Epson Perfection 1240U / 1240Photo</p>
</li>

<li>
<p>Epson Perfection 1250</p>
</li>

<li>
<p>Epson Perfection 1260</p>
</li>

<li>
<p>Epson Expression 1600</p>
</li>

<li>
<p>Epson Perfection 1640SU</p>
</li>

<li>
<p>Epson Perfection 1650</p>
</li>

<li>
<p>Epson Perfection 1660</p>
</li>

<li>
<p>Epson Perfection 1670</p>
</li>

<li>
<p>Epson Perfection 3200</p>
</li>

<li>
<p>Epson GT-8400UF</p>
</li>

<li>
<p>Epson GT-9300UF</p>
</li>

<li>
<p>Epson GT-9700F</p>
</li>

<li>
<p>Hewlett Packard Photosmart S20</p>
</li>

<li>
<p>Hewlett Packard Scanjet 2200C</p>
</li>

<li>
<p>Hewlett Packard Scanjet 3300C</p>
</li>

<li>
<p>Hewlett Packard Scanjet 3400CSE</p>
</li>

<li>
<p>Hewlett Packard Scanjet 4100C</p>
</li>

<li>
<p>Hewlett Packard Scanjet 4200C</p>
</li>

<li>
<p>Hewlett Packard Scanjet 4300C</p>
</li>

<li>
<p>Hewlett Packard Scanjet 5200C</p>
</li>

<li>
<p>Hewlett Packard Scanjet 5300C</p>
</li>

<li>
<p>Hewlett Packard Scanjet 5400C</p>
</li>

<li>
<p>Hewlett Packard Scanjet 6200C</p>
</li>

<li>
<p>Hewlett Packard Scanjet 6300C</p>
</li>

<li>
<p>KYE ColorPage Vivid-Pro</p>
</li>

<li>
<p>Microtek Phantom 336CX</p>
</li>

<li>
<p>Microtek Phantom C6</p>
</li>

<li>
<p>Microtek ScanMaker V6UL</p>
</li>

<li>
<p>Microtek ScanMaker V6USL</p>
</li>

<li>
<p>Microtek ScanMaker X6U</p>
</li>

<li>
<p>Minolta 5400</p>
</li>

<li>
<p>Mustek 600 CU</p>
</li>

<li>
<p>Mustek 1200 CU</p>
</li>

<li>
<p>Mustek 1200 UB</p>
</li>

<li>
<p>Mustek 1200 USB</p>
</li>

<li>
<p>Mustek BearPaw 1200F</p>
</li>

<li>
<p>Mustek BearPaw 1200TA</p>
</li>

<li>
<p>NatSemi BearPaw 1200</p>
</li>

<li>
<p>Nikon CoolScan LS40 ED</p>
</li>

<li>
<p>Primax 6200</p>
</li>

<li>
<p>Primax Colorado 1200u</p>
</li>

<li>
<p>Primax Colorado 600u</p>
</li>

<li>
<p>Primax Colorado USB 19200</p>
</li>

<li>
<p>Primax Colorado USB 9600</p>
</li>

<li>
<p>Primax G2-200</p>
</li>

<li>
<p>Primax G2-300</p>
</li>

<li>
<p>Primax G2-600</p>
</li>

<li>
<p>Primax G2600</p>
</li>

<li>
<p>Primax G2E-300</p>
</li>

<li>
<p>Primax G2E-3002</p>
</li>

<li>
<p>Primax G2E-600</p>
</li>

<li>
<p>Primax G2E600</p>
</li>

<li>
<p>Primax G2X-300</p>
</li>

<li>
<p>Primax G600</p>
</li>

<li>
<p>Primax ReadyScan 636i</p>
</li>

<li>
<p>Ultima 1200 UB Plus</p>
</li>

<li>
<p>UMAX Astra 1220U</p>
</li>

<li>
<p>UMAX Astra 1236U</p>
</li>

<li>
<p>UMAX Astra 2000U</p>
</li>

<li>
<p>UMAX Astra 2100U</p>
</li>

<li>
<p>UMAX Astra 2200U</p>
</li>

<li>
<p>UMAX Astra 3400</p>
</li>

<li>
<p>Visioneer OneTouch 3000</p>
</li>

<li>
<p>Visioneer OneTouch 5300</p>
</li>

<li>
<p>Visioneer OneTouch 7600</p>
</li>

<li>
<p>Visioneer OneTouch 6100</p>
</li>

<li>
<p>Visioneer OneTouch 6200</p>
</li>

<li>
<p>Visioneer OneTouch 8100</p>
</li>

<li>
<p>Visioneer OneTouch 8600</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=umass&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">umass</span>(4)</span></a> driver
supports USB Mass Storage devices, including:</p>

<ul>
<li>
<p>ADTEC Stick Drive AD-UST32M, 64M, 128M, 256M</p>
</li>

<li>
<p>Denno FireWire/USB2 Removable 2.5-inch HDD Case MIFU-25CB20</p>
</li>

<li>
<p>FujiFilm Zip USB Drive ZDR100 USB A</p>
</li>

<li>
<p>GREEN HOUSE USB Flash Memory "PicoDrive" GH-UFD32M, 64M, 128M</p>
</li>

<li>
<p>IBM 32MB USB Memory Key (P/N 22P5296)</p>
</li>

<li>
<p>IBM 256MB USB Drive (MSYSTEM DiskOnKey2)</p>
</li>

<li>
<p>IBM ThinkPad USB Portable CD-ROM Drive (P/N 33L5151)</p>
</li>

<li>
<p>I-O DATA USB CD/CD-R/CD-RW/DVD-R/DVD-RW/DVD-RAM/DVD-ROM Drive DVR-iUH2 (CDROM, DVD-RAM
only)</p>
</li>

<li>
<p>I-O DATA USB x6 CD-RW Drive CDRW-i64/USB (CDROM only)</p>
</li>

<li>
<p>I-O DATA USB/IEEE1394 Portable HD Drive HDP-i30P/CI, HDP-i40P/CI</p>
</li>

<li>
<p>Iomega USB Zip 100/250 drive</p>
</li>

<li>
<p>Iomega Zip750 USB2.0 drive</p>
</li>

<li>
<p>Keian USB1.1/2.0 3.5-inch HDD Case KU350A</p>
</li>

<li>
<p>Kurouto Shikou USB 2.5-inch HDD Case GAWAP2.5PS-USB2.0</p>
</li>

<li>
<p>LaCie P3 HardDrive USB 200GB</p>
</li>

<li>
<p>Logitec LDR-H443U2 DVD-RAM/-R/+R/-RW/+RW drive</p>
</li>

<li>
<p>Logitec Mobile USB Memory LMC-256UD</p>
</li>

<li>
<p>Logitec USB1.1/2.0 HDD Unit SHD-E60U2</p>
</li>

<li>
<p>Logitec USB Double-Speed Floppy Drive LFD-31U2</p>
</li>

<li>
<p>Logitec USB/IEEE1394 DVD-RAM/R/RW Unit LDR-N21FU2 (CDROM only)</p>
</li>

<li>
<p>MELCO USB Flash Disk "ClipDrive", RUF-C32M, -C64M, -C128M, -C256M, -C512M</p>
</li>

<li>
<p>MELCO USB Flash Disk "PetitDrive", RUF-32M, -64M, -128M, -256Mm</p>
</li>

<li>
<p>MELCO USB2.0 Flash Disk "PetitDrive2", RUF-256M/U2, -512M/U2</p>
</li>

<li>
<p>MELCO USB2.0 MO Drive MO-CH640U2</p>
</li>

<li>
<p>Matshita CF-VFDU03 floppy drive</p>
</li>

<li>
<p>Microtech International, Inc. USB-SCSI-HD 50 USB to SCSI cable</p>
</li>

<li>
<p>NOVAC USB2.0 2.5/3.5-inch HDD Case NV-HD351U</p>
</li>

<li>
<p>PNY Attache Flash Drive</p>
</li>

<li>
<p>Panasonic ("Matshita FDD CF-VFDU03")</p>
</li>

<li>
<p>Panasonic KXL-CB20AN Portable DVD-ROM/CD-R/RW</p>
</li>

<li>
<p>Panasonic KXL-CB35AN (DVD-ROM &amp; CD-R/RW)</p>
</li>

<li>
<p>Panasonic USB2.0 Portable CD-RW Drive KXL-RW40AN (CDROM only)</p>
</li>

<li>
<p>Panasonic floppy drive</p>
</li>

<li>
<p>RATOC Systems USB2.0 Removable HDD Case U2-MDK1, U2-MDK1B</p>
</li>

<li>
<p>SanDisk SDDR-31 (Compact Flash)</p>
</li>

<li>
<p>SanDisk SDDR-75 (only Compact Flash port works)</p>
</li>

<li>
<p>Sitecom CN-300 MultiFlash (MMC/SD, SmartMedia, CF, MemoryStick)</p>
</li>

<li>
<p>Sony Portable CD-R/RW Drive CRX10U (CDROM only)</p>
</li>

<li>
<p>TEAC Portable USB CD-ROM Unit CD-110PU/210PU</p>
</li>

<li>
<p>Trek Thumbdrive 8MB</p>
</li>

<li>
<p>VAIO floppy drive (includes Y-E Data Flashbuster-U)</p>
</li>

<li>
<p>Y-E Data floppy drive (720/1.44/2.88Mb)</p>
</li>
</ul>

<p>Among the supported digital cameras are:</p>

<ul>
<li>
<p>Asahi Optical (PENTAX) Optio 230 &amp; 330</p>
</li>
</ul>

<p>Audio Devices (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=uaudio&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">uaudio</span>(4)</span></a>
driver)</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=uvisor&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">uvisor</span>(4)</span></a> driver
supports the following devices:</p>

<ul>
<li>
<p>Handspring Treo</p>
</li>

<li>
<p>Handspring Treo 600</p>
</li>

<li>
<p>Handspring Visor</p>
</li>

<li>
<p>Palm I705</p>
</li>

<li>
<p>Palm M125</p>
</li>

<li>
<p>Palm M130</p>
</li>

<li>
<p>Palm M500</p>
</li>

<li>
<p>Palm M505</p>
</li>

<li>
<p>Palm M515</p>
</li>

<li>
<p>Palm Tungsten T</p>
</li>

<li>
<p>Palm Tungsten Z</p>
</li>

<li>
<p>Palm Zire</p>
</li>

<li>
<p>Palm Zire 31</p>
</li>

<li>
<p>Sony Clie 4.0</p>
</li>

<li>
<p>Sony Clie 4.1</p>
</li>

<li>
<p>Sony Clie 5.0</p>
</li>

<li>
<p>Sony Clie PEG-S500C</p>
</li>

<li>
<p>Sony Clie NX60</p>
</li>

<li>
<p>Sony Clie S360</p>
</li>
</ul>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="FIREWIRE" name="FIREWIRE">3.13 IEEE 1394 (Firewire)
Devices</a></h3>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=fwohci&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">fwohci</span>(4)</span></a> driver
provides support for PCI/CardBus FireWire interface cards. The driver supports the
following IEEE 1394 OHCI chipsets:</p>

<ul>
<li>
<p>Adaptec AHA-894x/AIC-5800</p>
</li>

<li>
<p>Apple Pangea</p>
</li>

<li>
<p>Apple UniNorth</p>
</li>

<li>
<p>Intel 82372FB</p>
</li>

<li>
<p>IOGEAR GUF320</p>
</li>

<li>
<p>Lucent / Agere FW322/323</p>
</li>

<li>
<p>NEC uPD72861</p>
</li>

<li>
<p>NEC uPD72870</p>
</li>

<li>
<p>NEC uPD72871/2</p>
</li>

<li>
<p>NEC uPD72873</p>
</li>

<li>
<p>NEC uPD72874</p>
</li>

<li>
<p>National Semiconductor CS4210</p>
</li>

<li>
<p>Ricoh R5C551</p>
</li>

<li>
<p>Ricoh R5C552</p>
</li>

<li>
<p>Sony CX3022</p>
</li>

<li>
<p>Sony i.LINK (CXD1947)</p>
</li>

<li>
<p>Sony i.LINK (CXD3222)</p>
</li>

<li>
<p>Sun PCIO-2 (RIO 1394)</p>
</li>

<li>
<p>Texas Instruments PCI4410A</p>
</li>

<li>
<p>Texas Instruments PCI4450</p>
</li>

<li>
<p>Texas Instruments PCI4451</p>
</li>

<li>
<p>Texas Instruments TSB12LV22</p>
</li>

<li>
<p>Texas Instruments TSB12LV23</p>
</li>

<li>
<p>Texas Instruments TSB12LV26</p>
</li>

<li>
<p>Texas Instruments TSB43AA22</p>
</li>

<li>
<p>Texas Instruments TSB43AB21/A/AI/A-EP</p>
</li>

<li>
<p>Texas Instruments TSB43AB22/A</p>
</li>

<li>
<p>Texas Instruments TSB43AB23</p>
</li>

<li>
<p>Texas Instruments TSB82AA2</p>
</li>

<li>
<p>VIA Fire II (VT6306)</p>
</li>
</ul>

<p>Serial Bus Protocol 2 (SBP-2) storage devices (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=sbp&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sbp</span>(4)</span></a>
driver)</p>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="BLUETOOTH" name="BLUETOOTH">3.14 Bluetooth Devices</a></h3>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ng_bt3c&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ng_bt3c</span>(4)</span></a>
driver provides support for the 3Com/HP 3CRWB6096-A PCCARD bluetooth adapter.</p>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ng_ubt&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ng_ubt</span>(4)</span></a> driver
supports all Bluetooth USB devices that conform with the Bluetooth specification v1.1,
including:</p>

<ul>
<li>
<p>3Com 3CREB96</p>
</li>

<li>
<p>AIPTEK BR0R02</p>
</li>

<li>
<p>EPoX BT-DG02</p>
</li>

<li>
<p>Mitsumi Bluetooth USB adapter</p>
</li>

<li>
<p>MSI MS-6967</p>
</li>

<li>
<p>TDK Bluetooth USB adapter</p>
</li>
</ul>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="CRYPTO-ACCEL" name="CRYPTO-ACCEL">3.15 Cryptographic
Accelerators</a></h3>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=hifn&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">hifn</span>(4)</span></a> driver
supports various cards containing the Hifn 7751, 7951, 7811, 7955, and 7956 chipsets,
such as:</p>

<ul>
<li>
<p>Invertex AEON</p>
</li>

<li>
<p>Hifn 7751</p>
</li>

<li>
<p>PowerCrypt</p>
</li>

<li>
<p>XL-Crypt</p>
</li>

<li>
<p>NetSec 7751</p>
</li>

<li>
<p>Soekris Engineering vpn1201 and vpn1211</p>
</li>

<li>
<p>Soekris Engineering vpn1401 and vpn1411</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=safe&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">safe</span>(4)</span></a> driver
supports cards containing any of the following chips:</p>

<ul>
<li>
<p>SafeNet 1141</p>
</li>

<li>
<p>SafeNet 1741</p>
</li>
</ul>

<p>The <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ubsec&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ubsec</span>(4)</span></a> driver
supports cards containing any of the following chips:</p>

<ul>
<li>
<p>Bluesteel 5501</p>
</li>

<li>
<p>Bluesteel 5601</p>
</li>

<li>
<p>Broadcom BCM5801</p>
</li>

<li>
<p>Broadcom BCM5802</p>
</li>

<li>
<p>Broadcom BCM5805</p>
</li>

<li>
<p>Broadcom BCM5820</p>
</li>

<li>
<p>Broadcom BCM5821</p>
</li>

<li>
<p>Broadcom BCM5822</p>
</li>

<li>
<p>Broadcom BCM5823</p>
</li>
</ul>
</div>

<div class="SECT2">
<hr />
<h3 class="SECT2"><a id="MISC" name="MISC">3.16 Miscellaneous</a></h3>

<p>FAX-Modem/PCCARD</p>

<ul>
<li>
<p>MELCO IGM-PCM56K/IGM-PCM56KH</p>
</li>

<li>
<p>Nokia Card Phone 2.0 (gsm900/dcs1800 HSCSD terminal)</p>
</li>
</ul>

<br />
<br />
<p>Floppy drives (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=fdc&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">fdc</span>(4)</span></a>
driver)</p>

<p>VGA-compatible video cards (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=vga&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">vga</span>(4)</span></a>
driver)</p>

<div class="NOTE">
<blockquote class="NOTE">
<p><b>Note:</b> Information regarding specific video cards and compatibility with <b
class="APPLICATION">Xorg</b> can be found at <a href="http://www.x.org/"
target="_top">http://www.x.org/</a>.</p>
</blockquote>
</div>

<br />
<br />
<p>Keyboards including:</p>

<ul>
<li>
<p>AT-style keyboards (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=atkbd&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">atkbd</span>(4)</span></a>
driver)</p>
</li>

<li>
<p>PS/2 keyboards (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=atkbd&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">atkbd</span>(4)</span></a>
driver)</p>
</li>

<li>
<p>USB keyboards (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ukbd&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ukbd</span>(4)</span></a>
driver)</p>
</li>
</ul>

<br />
<br />
<p>Pointing devices including:</p>

<ul>
<li>
<p>Bus mice and compatible devices (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=mse&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">mse</span>(4)</span></a>
driver)</p>
</li>

<li>
<p>PS/2 mice and compatible devices, including many laptop pointing devices (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=psm&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">psm</span>(4)</span></a>
driver)</p>
</li>

<li>
<p>Serial mice and compatible devices</p>
</li>

<li>
<p>USB mice (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ums&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ums</span>(4)</span></a>
driver)</p>
</li>
</ul>

<div class="NOTE">
<blockquote class="NOTE">
<p><b>Note:</b> <a
href="http://www.FreeBSD.org/cgi/man.cgi?query=moused&sektion=8&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">moused</span>(8)</span></a> has
more information on using pointing devices with FreeBSD. Information on using pointing
devices with <b class="APPLICATION">Xorg</b> can be found at <a href="http://www.x.org/"
target="_top">http://www.x.org/</a>.</p>
</blockquote>
</div>

<br />
<br />
<p>&#8220;PC standard&#8221; parallel ports (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=ppc&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">ppc</span>(4)</span></a>
driver)</p>

<p>PC-compatible joysticks (<a
href="http://www.FreeBSD.org/cgi/man.cgi?query=joy&sektion=4&manpath=FreeBSD+6.0-RELEASE">
<span class="CITEREFENTRY"><span class="REFENTRYTITLE">joy</span>(4)</span></a>
driver)</p>

<p>PHS Data Communication Card/PCCARD</p>

<ul>
<li>
<p>NTT DoCoMo P-in Comp@ct</p>
</li>

<li>
<p>Panasonic KX-PH405</p>
</li>

<li>
<p>SII MC-P200</p>
</li>
</ul>

<br />
<br />
<p>Xilinx XC6200-based reconfigurable hardware cards compatible with the HOT1 from <a
href="http://www.vcc.com/" target="_top">Virtual Computers</a> (xrpu driver).</p>
</div>
</div>
</div>

<hr />
<p align="center"><small>This file, and other release-related documents, can be
downloaded from <a href="ftp://ftp.FreeBSD.org/">ftp://ftp.FreeBSD.org/</a>.</small></p>

<p align="center"><small>For questions about FreeBSD, read the <a
href="http://www.FreeBSD.org/docs.html">documentation</a> before contacting &#60;<a
href="mailto:questions@FreeBSD.org">questions@FreeBSD.org</a>&#62;.</small></p>

<p align="center"><small>For questions about this documentation, e-mail &#60;<a
href="mailto:doc@FreeBSD.org">doc@FreeBSD.org</a>&#62;.</small></p>
++++


