--- title: "FreeBSD 5.4-RELEASE Errata" sidenav: download --- ++++
Copyright © 2000, 2001, 2002, 2003, 2004, 2005, 2006 The FreeBSD Documentation Project
$FreeBSD: src/release/doc/en_US.ISO8859-1/errata/article.sgml,v
1.69.2.32 2006/02/05 20:45:04 bmah Exp $
FreeBSD is a registered trademark of the FreeBSD Foundation.
Intel, Celeron, EtherExpress, i386, i486, Itanium, Pentium, and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Sparc, Sparc64, SPARCEngine, and UltraSPARC are trademarks of SPARC International, Inc in the United States and other countries. Products bearing SPARC trademarks are based upon architecture developed by Sun Microsystems, Inc.
Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks. Where those designations appear in this document, and the FreeBSD Project was aware of the trademark claim, the designations have been followed by the ``™'' or the ``®'' symbol.
This document lists errata items for FreeBSD 5.4-RELEASE, containing significant information discovered after the release or too late in the release cycle to be otherwise included in the release documentation. This information includes security advisories, as well as news relating to the software or documentation that could affect its operation or usability. An up-to-date version of this document should always be consulted before installing this version of FreeBSD.
This errata document for FreeBSD 5.4-RELEASE will be maintained until the release of FreeBSD 5.5-RELEASE.
This errata document contains ``late-breaking news'' about FreeBSD 5.4-RELEASE. Before installing this version, it is important to consult this document to learn about any post-release discoveries or problems that may already have been found and fixed.
Any version of this errata document actually distributed with the release (for example, on a CDROM distribution) will be out of date by definition, but other copies are kept updated on the Internet and should be consulted as the ``current errata'' for this release. These other copies of the errata are located at http://www.FreeBSD.org/releases/, plus any sites which keep up-to-date mirrors of this location.
Source and binary snapshots of FreeBSD 5-STABLE also contain up-to-date copies of this document (as of the time of the snapshot).
For a list of all FreeBSD CERT security advisories, see http://www.FreeBSD.org/security/ or ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/.
The following security advisories pertain to FreeBSD 5.4-RELEASE. For more information, consult the individual advisories available from ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/advisories/.
Advisory | Date | Topic |
---|---|---|
06:07.pf | 25 January 2006 |
IP fragment handling panic in pf(4) |
06:03.cpio | 11 January 2006 |
Multiple vulnerabilities in cpio(1) |
06:02.eex | 11 January 2006 |
ee(1) temporary file privilege escalation |
06:01.texindex | 11 January 2006 |
Texindex temporary file privilege escalation |
SA-05:09.htt | 22 May 2005 |
information disclosure when using HTT |
SA-05:10.tcpdump | 9 Jun 2005 |
Infinite loops in tcpdump protocol decoding |
SA-05:11.gzip | 9 Jun 2005 |
gzip directory traversal and permission race vulnerabilities |
SA-05:13.ipfw | 29 Jun 2005 |
ipfw packet matching errors with address tables |
SA-05:14.bzip2 | 29 Jun 2005 |
bzip2 denial of service and permission race vulnerabilities |
SA-05:15.tcp | 29 Jun 2005 |
TCP connection stall denial of service |
SA-05:16.zlib | 6 Jul 2005 |
Buffer overflow in zlib |
SA-05:17.devfs | 20 Jul 2005 |
devfs ruleset bypass |
SA-05:18.zlib | 27 Jul 2005 |
Buffer overflow in zlib |
SA-05:19.ipsec | 27 Jul 2005 |
IPsec incorrect key usage in AES-XCBC-MAC |
(6 May 2005) An error in the default permissions on the /dev/iir device node, which allowed unprivileged local users to send commands to the hardware supported by the iir(4) driver. Although the error was fixed prior to 5.4-RELEASE, it was applied too late in the release cycle to be mentioned in the release notes. For more information, see security advisory FreeBSD-SA-05:06.iir.
(6 May 2005) A bug in the validation of i386_get_ldt(2) system call input arguments, which may allow kernel memory may be disclosed to the user process, has been fixed. This bug was fixed prior to 5.4-RELEASE, although not in time to be mentioned in the release notes. For more information, see security advisory FreeBSD-SA-05:07.ldt.
(6 May 2005) Several information disclosure vulnerabilities in various parts of the kernel have been fixed in 5.4-RELEASE, although too late to be mentioned in the release notes. For more information, see security advisory FreeBSD-SA-05:08.kmem.
(24 Jun 2005) The FreeBSD/sparc64 5.4-RELEASE should have stated that the FreeBSD/sparc64 GENERIC kernel prior to the upcoming 6.0-RELEASE officially only supports serial consoles. This is especially true for the FreeBSD/sparc64 5.4-RELEASE GENERIC kernel because the ofw_console(4) driver which also provides limited indirect support for graphical consoles has been replaced with the uart(4) driver in favor better serial support.
Due to this limitation to serial consoles the screen will stop working after the message ``jumping to kernel entry at...'' is displayed when trying to use the FreeBSD/sparc64 5.4-RELEASE GENERIC kernel with a graphical console, while FreeBSD itself continues working actually.
If you want to use FreeBSD/sparc64 with a graphical console anyway you can do one of the following:
In case your machine is equipped with a Sun Creator, Sun Creator3D, or Sun Elite3D frame buffer card and a Sun RS232 keyboard you can install FreeBSD/sparc64 5.4-RELEASE with a serial console and afterwards compile a custom kernel with the following additional options:
device sc device creator options KBD_INSTALL_CDEV
Additionally you have to enable the tty[1-7] entries in /etc/ttys like so:
ttyv0 "/usr/libexec/getty Pc" cons25 on secure # Virtual terminals ttyv1 "/usr/libexec/getty Pc" cons25 on secure ttyv2 "/usr/libexec/getty Pc" cons25 on secure ttyv3 "/usr/libexec/getty Pc" cons25 on secure ttyv4 "/usr/libexec/getty Pc" cons25 on secure ttyv5 "/usr/libexec/getty Pc" cons25 on secure ttyv6 "/usr/libexec/getty Pc" cons25 on secure ttyv7 "/usr/libexec/getty Pc" cons25 on secure
This will yield native support for these keyboards and frame buffers including VTY switching and X Window System. Note that this really requires at least FreeBSD/sparc64 5.4-RELEASE otherwise it will not work on most of the UltraSPARC models.
In case your machine is equipped with a ATI Mach64 frame buffer (found on-board in e.g. Sun Blade 100/150 and Sun Ultra 5/10 as well as on Sun PGX8 and Sun PGX64 add-on cards) or a PS/2 or a USB keyboard update to a FreeBSD/sparc64 6.0 from June 10 2005 or later. If you use the stock GENERIC kernel and /etc/ttys from there no further action is required.
This will yield native support for these keyboards and frame buffers including VTY switching and X Window System.
In case your machine is equipped with hardware other than those mentioned above or you refuse to update to FreeBSD/sparc64 6.0 you can re-enable the ofw_console(4) driver as a last resort. To do so build a custom kernel with the following additional options:
device ofw_console device sab device zs
and make sure to comment out the following kernel option:
device uart
This will yield limited indirect support for any graphical console hardware, however with poor performance, and VTY switching as well as X Window System do not work with this. Note that ofw_console(4) is not really MPSAFE and therefore can result in panics under certain conditions.
For more details of how to recompile your kernel or update to FreeBSD 6.0, see Configuring the FreeBSD Kernel and The Cutting Edge sections in the FreeBSD Handbook, respectively.
This file, and other release-related documents, can be downloaded from http://www.FreeBSD.org/snapshots/.
For questions about FreeBSD, read the documentation before contacting <questions@FreeBSD.org>.
All users of FreeBSD 5-STABLE should subscribe to the <stable@FreeBSD.org> mailing list.
For questions about this documentation, e-mail <doc@FreeBSD.org>.
++++