--- title: "FreeBSD 4.0 Release Notes" sidenav: download --- = FreeBSD 4.0 Release Notes .... RELEASE NOTES FreeBSD Release 4.0-RELEASE Any installation failures or crashes should be reported by using the send-pr command (those preferring a Web-based interface can also see http://www.FreeBSD.org/send-pr.html). For information about FreeBSD and the layout of the 4.0-RELEASE directory (especially if you're installing from floppies!), see ABOUT.TXT. For installation instructions, see the INSTALL.TXT and HARDWARE.TXT files. For the latest of these 4.0-STABLE snapshots, you should always see: ftp://current.FreeBSD.org/pub/FreeBSD If you wish to get the latest post-3.X-RELEASE technology. Table of contents: ------------------ 1. What's new since the 3.1/4.0 branch 1.1 KERNEL CHANGES 1.2 SECURITY FIXES 1.3 USERLAND CHANGES 2. Supported Configurations 2.1 Disk Controllers 2.2 Ethernet cards 2.3 ATM 2.4 Misc 3. Obtaining FreeBSD 3.1 FTP/Mail 3.2 CDROM 4. Upgrading from previous releases of FreeBSD 5. Reporting problems, making suggestions, submitting code 6. Acknowledgements 1. What's new since the 3.1/4.0 branch -------------------------------------- All changes described here are unique to the 4.0 branch unless specifically marked as [MERGED] features. 1.1. KERNEL CHANGES ------------------- NFS has been immensely improved with bug fixes and performance tuning. Support for more than 32 signals has been added. POSIX 1003.1 conformant SA_SIGINFO signal handlers are now supported. SIGFPE signal handlers (both SA_SIGINFO and traditional BSD handlers) now get meaningful error codes describing the kind of error. See sigaction(2). IA32 hardware debug registers are now supported. See ptrace(2) and procfs(5). Jail(8) aware sysctl(8) variables have been added for Linux mode. A large number of bug fixes and performance improvements have been made to the VM system, including and most especially to mmap() and related functions. The MAP_NOSYNC option has been added to better support the use of shared files as an IPC mechanism. The VM system's swapper has been completely rewritten and performance has been greatly enhanced, especially when swapping over NFS. An emulator for SVR4 binaries has been added. Support has been added for direct access to NTFS filesystems. Support for the NWFS filesystem and NetWare client connections has been added. A variety of NetWare related tools, such as ipxping and ncprint, have been added in ports/net/ncplib. A new ATA/ATAPI driver has been implemented. The aim of this new subsystem is to maximise performance on modern ATA/ATAPI based systems. The "ata" driver supports all major chipsets including those used on PCI card based controllers like the Promise and the Abit/SIIG. There is support for busmaster DMA transfers upto and including the new ATA/66 mode. The 'ata' driver automatically setup the hardware for the maximum possible transfer mode to maximise system throughput. Supported devices are all ATA compliant disks and ATAPI CDROM, CD-R, CD-RW, DVD-ROM, DVD-RAM, LS120, ZIP and tape drives. The ata driver also support PCCARD ATA devices. The 'ata' driver also sports error handling and timeout code, to avoid the problems of "hung" ATA/ATAPI devices. A new utility 'burncd' has been written to facilitate easy control of ATAPI CD-R and CD-RW drives, and allows burning of CD-R/RW media in a wide selction of formats, including multisession mode. Driver support has been added for PCI gigabit ethernet adapters based on the Alteon Networks Tigon 1 and Tigon 2 chipsets, including the Alteon AceNIC, 3Com 3c985 and Netgear GA620. [MERGED] Driver support has been added for IEEE 802.11 PCMCIA wireless network adapters based on the Lucent Hermes chipset, including the Lucent WaveLAN/IEEE 802.11, the Cabletron RoamAbout and Melco Aireconnect. Both 2Mbps and 6Mbps Turbo adapters are supported. [MERGED] Driver support has been added for PCI fast ethernet cards based on the ADMtek Inc. AL981 Comet chipset. [MERGED] Driver support has been added for PCI fast ethernet cards based on the ADMtek Inc. AL985 Centaur chipset. [MERGED] Support has been added for the Rise mP6 processor. [MERGED] Driver support has been added for SysKonnect SK-984x PCI gigabit ethernet adapters. [MERGED] Driver support has been added for Adaptec Duralink PCI ethernet adapters based on the Adaptec AIC-6915 fast ethernet controller. [MERGED] Driver support has been added for PCI fast ethernet adapters based on the Sundance Technologies ST201 controller, including the D-Link DFE-550TX. [MERGED] Driver support has been added for the 3Com 3c905C-TX. [MERGED] Driver support has been added for SMC SMC9xxx-based Ethernet adapters. Several IPFW improvements including stateful inspection, user- and group-based firewalling, dynamic logging with arbitrary logging limits, probabilistic rule match. [MERGED] IPv6 IPFW has been imported from the KAME project. The "dummynet" traffic shaper now handles efficiently thousands of independent queues. [MERGED] Several fixes to bridging, which now supports clusters of interfaces with bridging being done independently within each cluster. [MERGED] The top-level syslog(3) category "security" has been added, and IPFW now uses syslog(3) to log all messages to /var/log/security. Driver support has been added for PCI fast ethernet adapters based on the Silicon Integrated Systems SiS 900 and SiS 7016 ethernet controllers. [MERGED] Driver support has been added for PCI fast ethernet adapters based on the Davicom DM9100 and DM9102 ethernet controllers, including the Jaton Corporation XpressNet. Support has been added for blocking incoming ICMP redirects, outgoing RST frames and incoming SYN|FIN frames in order to lessen or nullify the impact of certain kinds of DoS attacks. [MERGED] Support has been added for forwarding IP datagrams without inspecting or decreasing the TTL in order to make gateways and firewalls less visible and therefore less exposed to attacks. [MERGED] The old `sd' (SCSI Disk) backwards compatibility support has been removed. Any usage of "/dev/sd*" in ``/etc/fstab'' must be replaced by "/dev/da*". In addition, any useage of "/dev/*sd*" in scripts need to be changed. Even if you have old `sd' device entries in /dev, they will no longer work. The `al' `ax' `dm' `pn' and `mx' drivers have been removed and replaced with a single driver (`dc') in order to reduce code duplication. The new driver handles all chipsets supported by the older drivers, and it offers improved support for 10/100 cards based on the DEC/Intel 21143. Driver support has been added for the 3Com 3c450-TX HomeConnect PCI ethernet NIC. [MERGED] Driver support has been added for USB ethernet adapters based on the ADMtek AN986 Pegasus chip, including the LinkSys USB100TX, the Billionton USB100, the Melco Inc. LU-ATX, the D-Link 650TX and the SMC-2202USB. Driver support has been added for USB ethernet adapters based on the Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the Peracom USB Ethernet Adapter, the 3Com 3c19250, the Entrega NET-USB-E45, the ADS Technologies USB-10BT, the ATen UC10T, the Netgear EA101, the D-Link DSB-650, and the SMC 2102USB and 2104USB. IPfilter version 3.3.8 has been integrated. Driver support has been added for USB ethernet adapters based on the CATC USB-EL1210A chip, including the CATC Netmate and Netmate II, and the Belkin F5U111. Driver support has been added for Aironet 4500/4800 802.11 wireless adapters. This includes PCMCIA, PCI and ISA models. IPv6 support has been imported from the KAME project. This includes the kernel IPv6 protocol stack (sys/netinet6), TCP IPv6 support, configurable IPv6 and IPv4 tunneling over IPv6 or IPv4, and IPv6 TCP to IPv4 TCP translation gateway support. Protocol-independent name resolution functions have been added to libc (getaddrinfo, getnameinfo, etc). Floating point exceptions for new processes (devide-by-zero, under/overflow, invalid range etc.) are now disabled by default. Use fpsetmask(3) to reenable those you need. Note that integer device-by-zero is not covered by the FPU and will still trap after this change. Also note that conversion of float/double to integer where the float variable is too big now doesn't trap as well (it can't be separated from other operations we want masked). 1.2. SECURITY FIXES ------------------- Numerous security enhancements and fixes have been applied during the course of development of FreeBSD 4.0. Most of these have also been backported to the 3.X-STABLE series. A new jail(2) system call and admin command (jail(8)) have been added for additional flexibility in creating secure process execution environments. OpenSSL v0.9.4 (a general-purpose cryptography and SSL2/3/TLSv1 toolkit) has been integrated with the base system. In the future this will be used to provide strong cryptography for FreeBSD utilities out-of-the-box. OpenSSH 1.2 has been integrated with the base system. OpenSSH is a free (BSD-licensed), full-featured implementation of the SSH v1 protocol, which is completely interoperable with other SSH v1 clients and servers, such as the /usr/ports/security/ssh port. OpenSSH provides all of the features of this port - in fact it is based on an older release before the software became restrictively licensed. FreeBSD 4.0 provides SSH client/server functionality out-of-the-box if you choose to install the 'DES' cryptography distribution in sysinstall. Telnet has a new encrypted authentication mechanism called SRA. SRA uses a Diffie-Hellmen exchange to establish a session key, then uses that to DES encrypt the username and password. As a side effect the session key is used to DES encrypt the session. SRA is vulnerable to man-in-the-middle attacks, the DH parameters are on the small side, and DES is showing its age, but the benefits are that it requires absolutely no administrative changes to the machine to work, and is at the very least a step up from plaintext. To use it, you need to either use "telnet -ax" or set up a .telnetrc to enable it by default. IPsec support has been imported from the KAME project. This includes IPsec tunnel mode to implement a Virtual Private Network via a security gateway, and IPsec transport mode to achieve secure socket-level communication. Also, kernel-internal crypto code has been imported to sys/crypto, and IPsec support has been added to the following userland applications: sbin/ping, usr.sbin/inetd, usr.sbin/rrenumd, usr.sbin/traceroute6, usr.sbin/rtadvd, usr.sbin/setkey 1.3. USERLAND CHANGES --------------------- The base C/C++ compiler has been upgraded from GCC 2.7.2 to GCC 2.95.2. This gives users full ISO C++ support, and preliminary C9x support. Various changes has been made to /bin/sh to improve POSIX 1003.2 conformance, especially for scripting. The f77 emulation via f2c has been replaced by a native F77 compiler. The timezone database has been updated to catch all of the recent changes in Europe, the former Soviet Union, and Central and South America. The timezone data files now contain a magic number allowing for easy identification. Groff/troff/eqn has been updated to version 1.15. Gdb has been updated to version 4.18. Numerous fixes have been applied to improve the security of FreeBSD code as part of the FreeBSD Auditing Project. FreeBSD's threads library, libc_r, has had many features and performance improvements added, which makes it almost completely POSIX-compliant. In addition, Linux's kernel-supported LinuxThreads library is now available as a port (ports/devel/linuxthreads), which can be used for native FreeBSD programs. The following dedicated IPv6 applications have been added: sbin/ping6, sbin/rtsol, usr.sbin/gifconfig, usr.sbin/ifmcstat, usr.sbin/pim6dd, usr.sbin/pim6sd, usr.sbin/prefix, usr.sbin/rip6query, usr.sbin/route6d, usr.sbin/rrenumd, usr.sbin/rtadvd, usr.sbin/rtsold, usr.sbin/traceroute6 The following applications have been updated to support IPv6: usr.bin/netstat, usr.bin/fstat, usr.bin/sockstat, usr.sbin/tcpdchk, usr.sbin/tcpdump, usr.sbin/trpt, libexec/ftpd, libexec/rlogind, libexec/rshd, libexec/telnetd Many ports have been updated to support IPv6. See the 'ipv6' virtual ports category for a list. Sysinstall enables PC-card controllers and pccardd(8) for PC-card installation media. 2. Supported Configurations --------------------------- FreeBSD currently runs on a wide variety of ISA, VLB, EISA, MCA and PCI bus based PC's, ranging from 386sx to Pentium class machines (though the 386sx is not recommended). Support for generic IDE or ESDI drive configurations, various SCSI controller, network and serial cards is also provided. What follows is a list of all peripherals currently known to work with FreeBSD. Other configurations may also work, we have simply not as yet received confirmation of this. 2.1. Disk Controllers --------------------- WD1003 (any generic MFM/RLL) WD1007 (any generic IDE/ESDI) IDE ATA Adaptec 1535 ISA SCSI controllers Adaptec 154x series ISA SCSI controllers Adaptec 164x series MCA SCSI controllers Adaptec 174x series EISA SCSI controller in standard and enhanced mode. Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) series EISA/VLB/PCI SCSI controllers. Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers. Adaptec 1510 series ISA SCSI controllers (not for bootable devices) Adaptec 152x series ISA SCSI controllers Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x and SoundBlaster SCSI cards. AdvanSys SCSI controllers (all models). BusLogic MultiMaster controllers: [ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ] BusLogic MultiMaster "W" Series Host Adapters: BT-948, BT-958, BT-958D BusLogic MultiMaster "C" Series Host Adapters: BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C, BT-540CF BusLogic MultiMaster "S" Series Host Adapters: BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A, BT-542B BusLogic MultiMaster "A" Series Host Adapters: BT-742A, BT-542B AMI FastDisk controllers that are true BusLogic MultiMaster clones are also supported. The Buslogic/Bustek BT-640 and Storage Dimensions SDC3211B and SDC3211F Microchannel (MCA) bus adapters are also supported. DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and SmartRAID IV SCSI/RAID controllers are supported. The DPT SmartRAID/CACHE V is not yet supported. SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a, 53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers: ASUS SC-200 Data Technology DTC3130 (all variants) Diamond FirePort (all) NCR cards (all) Symbios cards (all) Tekram DC390W, 390U and 390F Tyan S1365 QLogic 1020, 1040, 1040B, 1080 and 1240 SCSI Host Adapters. QLogic 2100 Fibre Channel Adapters (private loop only). DTC 3290 EISA SCSI controller in 1542 emulation mode. With all supported SCSI controllers, full support is provided for SCSI-I & SCSI-II peripherals, including hard disks, optical disks, tape drives (including DAT and 8mm Exabyte), medium changers, processor target devices and CDROM drives. WORM devices that support CDROM commands are supported for read-only access by the CDROM driver. WORM/CD-R/CD-RW writing support is provided by cdrecord, which is in the ports tree. The following CD-ROM type systems are supported at this time: (cd) SCSI interface (also includes ProAudio Spectrum and SoundBlaster SCSI) (matcd) Matsushita/Panasonic (Creative SoundBlaster) proprietary interface (562/563 models) (scd) Sony proprietary interface (all models) (acd) ATAPI IDE interface The following drivers were supported under the old SCSI subsystem, but are NOT YET supported under the new CAM SCSI subsystem: NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller. UltraStor 14F, 24F and 34F SCSI controllers. Seagate ST01/02 SCSI controllers. Future Domain 8xx/950 series SCSI controllers. WD7000 SCSI controller. [ Note: There is work-in-progress to port the UltraStor driver to the new CAM SCSI framework, but no estimates on when or if it will be completed. ] Unmaintained drivers, they might or might not work for your hardware: (mcd) Mitsumi proprietary CD-ROM interface (all models) 2.2. Ethernet cards ------------------- Adaptec Duralink PCI fast ethernet adapters based on the Adaptec AIC-6915 fast ethernet controller chip, including the following: ANA-62011 64-bit single port 10/100baseTX adapter ANA-62022 64-bit dual port 10/100baseTX adapter ANA-62044 64-bit quad port 10/100baseTX adapter ANA-69011 32-bit single port 10/100baseTX adapter ANA-62020 64-bit single port 100baseFX adapter Allied-Telesis AT1700 and RE2000 cards Alteon Networks PCI gigabit ethernet NICs based on the Tigon 1 and Tigon 2 chipsets, including the following: Alteon AceNIC (Tigon 1 and 2) 3Com 3c985-SX (Tigon 1 and 2) Netgear GA620 (Tigon 2) Silicon Graphics Gigabit Ethernet DEC/Compaq EtherWORKS 1000 NEC Gigabit Ethernet AMD PCnet/PCI (79c970 & 53c974 or 79c974) SMC Elite 16 WD8013 ethernet interface, and most other WD8003E, WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT based clones. SMC Elite Ultra. SMC Etherpower II. RealTek 8129/8139 fast ethernet NICs including the following: Allied Telesyn AT2550 Allied Telesyn AT2500TX Genius GF100TXR (RTL8139) NDC Communications NE100TX-E OvisLink LEF-8129TX OvisLink LEF-8139TX Netronix Inc. EA-1210 NetEther 10/100 KTX-9130TX 10/100 Fast Ethernet Accton "Cheetah" EN1027D (MPX 5030/5038; RealTek 8139 clone?) SMC EZ Card 10/100 PCI 1211-TX Lite-On 82c168/82c169 PNIC fast ethernet NICs including the following: LinkSys EtherFast LNE100TX NetGear FA310-TX Rev. D1 Matrox FastNIC 10/100 Kingston KNE110TX Macronix 98713, 98713A, 98715, 98715A and 98725 fast ethernet NICs NDC Communications SFA100A (98713A) CNet Pro120A (98713 or 98713A) CNet Pro120B (98715) SVEC PN102TX (98713) Macronix/Lite-On PNIC II LC82C115 fast ethernet NICs including the following: LinkSys EtherFast LNE100TX Version 2 Winbond W89C840F fast ethernet NICs including the following: Trendware TE100-PCIE VIA Technologies VT3043 "Rhine I" and VT86C100A "Rhine II" fast ethernet NICs including the following: Hawking Technologies PN102TX D-Link DFE-530TX AOpen/Acer ALN-320 Silicon Integrated Systems SiS 900 and SiS 7016 PCI fast ethernet NICs Sundance Technologies ST201 PCI fast ethernet NICs including the following: D-Link DFE-550TX SysKonnect SK-984x PCI gigabit ethernet cards including the following: SK-9841 1000baseLX single mode fiber, single port SK-9842 1000baseSX multimode fiber, single port SK-9843 1000baseLX single mode fiber, dual port SK-9844 1000baseSX multimode fiber, dual port Texas Instruments ThunderLAN PCI NICs, including the following: Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port Compaq Netelligent 10/100 TX Embedded UTP, 10 T PCI UTP/Coax, 10/100 TX UTP Compaq NetFlex 3P, 3P Integrated, 3P w/ BNC Olicom OC-2135/2138, OC-2325, OC-2326 10/100 TX UTP Racore 8165 10/100baseTX Racore 8148 10baseT/100baseTX/100baseFX multi-personality ADMtek Inc. AL981-based PCI fast ethernet NICs ADMtek Inc. AN985-based PCI fast ethernet NICs ADMtek Inc. AN986-based USB ethernet NICs including the following: LinkSys USB100TX Billionton USB100 Melco Inc. LU-ATX D-Link DSB-650TX SMC 2202USB CATC USB-EL1210A-based USB ethernet NICs including the following: CATC Netmate CATC Netmate II Belkin F5U111 Kawasaki LSI KU5KUSB101B-based USB ethernet NICs including the following: LinkSys USB10T Entrega NET-USB-E45 Peracom USB Ethernet Adapter 3Com 3c19250 ADS Technologies USB-10BT ATen UC10T Netgear EA101 D-Link DSB-650 SMC 2102USB SMC 2104USB Corega USB-T ASIX Electronics AX88140A PCI NICs, including the following: Alfa Inc. GFC2204 CNet Pro110B DEC EtherWORKS III NICs (DE203, DE204, and DE205) DEC EtherWORKS II NICs (DE200, DE201, DE202, and DE422) DEC DC21040, DC21041, or DC21140 based NICs (SMC Etherpower 8432T, DE245, etc) DEC FDDI (DEFPA/DEFEA) NICs Davicom DM9100 and DM9102 PCI fast ethernet NICs, including the following: Jaton Corporation XpressNet Fujitsu MB86960A/MB86965A HP PC Lan+ cards (model numbers: 27247B and 27252A). Intel EtherExpress 16 Intel EtherExpress Pro/10 Intel EtherExpress Pro/100B PCI Fast Ethernet Intel InBusiness 10/100 PCI Network Adapter Intel PRO/100+ Management Adapter Isolan AT 4141-0 (16 bit) Isolink 4110 (8 bit) Novell NE1000, NE2000, and NE2100 ethernet interface. PCI network cards emulating the NE2000: RealTek 8029, NetVin 5000, Winbond W89C940, Surecom NE-34, VIA VT86C926. 3Com 3C501 cards 3Com 3C503 Etherlink II 3Com 3c505 Etherlink/+ 3Com 3C507 Etherlink 16/TP 3Com 3C509, 3C529 (MCA), 3C579, 3C589/589B/589C/589D/589E/XE589ET/574TX/574B (PC-card/PCMCIA), 3C590/592/595/900/905/905B/905C PCI and EISA (Fast) Etherlink III / (Fast) Etherlink XL 3Com 3c980/3c980B Fast Etherlink XL server adapter 3Com 3cSOHO100-TX OfficeConnect adapter Toshiba ethernet cards Crystal Semiconductor CS89x0-based NICs, including: IBM Etherjet ISA NE2000 compatible PC-Card (PCMCIA) Ethernet/FastEthernet cards, including the following: AR-P500 Ethernet card Accton EN2212/EN2216/UE2216(OEM) Allied Telesis CentreCOM LA100-PCM_V2 AmbiCom 10BaseT card BayNetworks NETGEAR FA410TXC Fast Ethernet CNet BC40 adapter COREGA Ether PCC-T/EtherII PCC-T Compex Net-A adapter CyQ've ELA-010 D-Link DE-650/660 Danpex EN-6200P2 IO DATA PCLATE IBM Creditcard Ethernet I/II IC-CARD Ethernet/IC-CARD+ Ethernet Linksys EC2T/PCMPC100 Melco LPC-T NDC Ethernet Instant-Link National Semiconductor InfoMover NE4100 Network Everywhere Ethernet 10BaseT PC Card Planex FNW-3600-T Socket LP-E Surecom EtherPerfect EP-427 Telecom Device SuperSocket RE450T Megahertz X-Jack Ethernet PC-Card CC-10BT 2.3 ATM ------- o ATM Host Interfaces - FORE Systems, Inc. PCA-200E ATM PCI Adapters - Efficient Networks, Inc. ENI-155p ATM PCI Adapters o ATM Signalling Protocols - The ATM Forum UNI 3.1 signalling protocol - The ATM Forum UNI 3.0 signalling protocol - The ATM Forum ILMI address registration - FORE Systems's proprietary SPANS signalling protocol - Permanent Virtual Channels (PVCs) o IETF "Classical IP and ARP over ATM" model - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5" - RFC 1577, "Classical IP and ARP over ATM" - RFC 1626, "Default IP MTU for use over ATM AAL5" - RFC 1755, "ATM Signaling Support for IP over ATM" - RFC 2225, "Classical IP and ARP over ATM" - RFC 2334, "Server Cache Synchronization Protocol (SCSP)" - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt, "A Distributed ATMARP Service Using SCSP" o ATM Sockets interface 2.4. Misc --------- AST 4 port serial card using shared IRQ. ARNET 8 port serial card using shared IRQ. ARNET (now Digiboard) Sync 570/i high-speed serial. Boca BB1004 4-Port serial card (Modems NOT supported) Boca IOAT66 6-Port serial card (Modems supported) Boca BB1008 8-Port serial card (Modems NOT supported) Boca BB2016 16-Port serial card (Modems supported) Comtrol Rocketport card. Cyclades Cyclom-y Serial Board. STB 4 port card using shared IRQ. SDL Communications Riscom/8 Serial Board. SDL Communications RISCom/N2 and N2pci high-speed sync serial boards. Stallion multiport serial boards: EasyIO, EasyConnection 8/32 & 8/64, ONboard 4/16 and Brumby. Specialix SI/XIO/SX ISA, EISA and PCI serial expansion cards/modules. Adlib, SoundBlaster, SoundBlaster Pro, ProAudioSpectrum, Gravis UltraSound and Roland MPU-401 sound cards. (snd driver) Most ISA audio codecs manufactured by Crystal Semiconductors, OPTi, Creative Labs, Avance, Yamaha and ENSONIQ. (pcm driver) Connectix QuickCam Matrox Meteor Video frame grabber Creative Labs Video Spigot frame grabber Cortex1 frame grabber Hauppauge Wincast/TV boards (PCI) STB TV PCI Intel Smart Video Recorder III Various Frame grabbers based on Brooktree Bt848 / Bt878 chip. HP4020, HP6020, Philips CDD2000/CDD2660 and Plasmon CD-R drives. PS/2 mice Standard PC Joystick X-10 power controllers GPIB and Transputer drivers. Genius and Mustek hand scanners. Xilinx XC6200 based reconfigurable hardware cards compatible with the HOT1 from Virtual Computers (www.vcc.com) Support for Dave Mills experimental Loran-C receiver. Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA and ISA standard speed (2Mbps) and turbo speed (6Mbps) wireless network adapters and workalikes (NCR WaveLAN/IEEE 802.11, Cabletron RoamAbout 802.11 DS, and Melco Airconnect). Note: the ISA versions of these adapters are actually PCMCIA cards combined with an ISA to PCMCIA bridge card, so both kinds of devices work with the same driver. Aironet 4500/4800 series 802.11 wireless adapters. The PCMCIA, PCI and ISA adapters are all supported. 3. Obtaining FreeBSD -------------------- You may obtain FreeBSD in a variety of ways: 3.1. FTP/Mail ------------- You can ftp FreeBSD and any or all of its optional packages from `ftp.FreeBSD.org' - the official FreeBSD release site. For other locations that mirror the FreeBSD software see the file MIRROR.SITES. Please ftp the distribution from the site closest (in networking terms) to you. Additional mirror sites are always welcome! Contact freebsd-admin@FreeBSD.org for more details if you'd like to become an official mirror site. If you do not have access to the Internet and electronic mail is your only recourse, then you may still fetch the files by sending mail to `ftpmail@ftpmail.vix.com' - putting the keyword "help" in your message to get more information on how to fetch files using this mechanism. Please do note, however, that this will end up sending many *tens of megabytes* through the mail and should only be employed as an absolute LAST resort! 3.2. CDROM ---------- FreeBSD 4.0-RELEASE and 3.X-RELEASE CDs may be ordered on CDROM from: Walnut Creek CDROM 4041 Pike Lane, Suite F Concord CA 94520 1-800-786-9907, +1-925-674-0783, +1-925-674-0821 (FAX) Or via the Internet from orders@cdrom.com or http://www.cdrom.com. Their current catalog can be obtained via ftp from: ftp://ftp.cdrom.com/cdrom/catalog Cost per -RELEASE CD is $39.95 or $24.95 with a FreeBSD subscription. FreeBSD SNAPshot CDs, when available, are $39.95 or $14.95 with a FreeBSD-SNAP subscription (-RELEASE and -SNAP subscriptions are entirely separate). With a subscription, you will automatically receive updates as they are released. Your credit card will be billed when each disk is shipped and you may cancel your subscription at any time without further obligation. Shipping (per order not per disc) is $5 in the US, Canada or Mexico and $9.00 overseas. They accept Visa, Mastercard, Discover, American Express or checks in U.S. Dollars and ship COD within the United States. California residents please add 8.25% sales tax. Should you be dissatisfied for any reason, the CD comes with an unconditional return policy. 4. Upgrading from previous releases of FreeBSD ---------------------------------------------- If you're upgrading from a previous release of FreeBSD, most likely it's 3.0 and some of the following issues may affect you, depending of course on your chosen method of upgrading. There are two popular ways of upgrading FreeBSD distributions: o Using sources, via /usr/src o Using sysinstall's (binary) upgrade option. Please read the UPGRADE.TXT file for more information. 5. Reporting problems, making suggestions, submitting code. ----------------------------------------------------------- Your suggestions, bug reports and contributions of code are always valued - please do not hesitate to report any problems you may find (preferably with a fix attached, if you can!). The preferred method to submit bug reports from a machine with Internet mail connectivity is to use the send-pr command or use the CGI script at http://www.FreeBSD.org/send-pr.html. Bug reports will be dutifully filed by our faithful bugfiler program and you can be sure that we'll do our best to respond to all reported bugs as soon as possible. Bugs filed in this way are also visible on our WEB site in the support section and are therefore valuable both as bug reports and as "signposts" for other users concerning potential problems to watch out for. If, for some reason, you are unable to use the send-pr command to submit a bug report, you can try to send it to: freebsd-bugs@FreeBSD.org Note that send-pr itself is a shell script that should be easy to move even onto a totally different system. We much prefer if you could use this interface, since it make it easier to keep track of the problem reports. However, before submitting, please try to make sure whether the problem might have already been fixed since. Otherwise, for any questions or tech support issues, please send mail to: freebsd-questions@FreeBSD.org Additionally, being a volunteer effort, we are always happy to have extra hands willing to help - there are already far more desired enhancements than we'll ever be able to manage by ourselves! To contact us on technical matters, or with offers of help, please send mail to: freebsd-hackers@FreeBSD.org Please note that these mailing lists can experience *significant* amounts of traffic and if you have slow or expensive mail access and are only interested in keeping up with significant FreeBSD events, you may find it preferable to subscribe instead to: freebsd-announce@FreeBSD.org All of the mailing lists can be freely joined by anyone wishing to do so. Send mail to MajorDomo@FreeBSD.org and include the keyword `help' on a line by itself somewhere in the body of the message. This will give you more information on joining the various lists, accessing archives, etc. There are a number of mailing lists targeted at special interest groups not mentioned here, so send mail to majordomo and ask about them! 6. Acknowledgements ------------------- FreeBSD represents the cumulative work of many dozens, if not hundreds, of individuals from around the world who have worked very hard to bring you this release. For a complete list of FreeBSD project staffers, please see: http://www.FreeBSD.org/handbook/staff.html or, if you've loaded the doc distribution: file:/usr/share/doc/handbook/staff.html Special mention to: The donors listed at http://www.FreeBSD.org/handbook/donors.html Justin M. Seger for almost single-handedly converting the ports collection to ELF. Doug Rabson and John Birrell for making FreeBSD/alpha happen and to the NetBSD project for substantial indirect aid. Peter Wemm for the new kernel module system (with substantial aid from Doug Rabson). And to the many thousands of FreeBSD users and testers all over the world, without whom this release simply would not have been possible. We sincerely hope you enjoy this release of FreeBSD! The FreeBSD Project .... link:../../[Release Home]