--- title: "FreeBSD/sparc64 Project" sidenav: developers --- include::shared/releases.adoc[] include::shared/en/urls.adoc[] = FreeBSD/sparc64 Project [[intro]] == Introduction This page contains information about the FreeBSD port to Fujitsu's SPARC64(R) and Oracle's UltraSPARC(R) architectures. Discussion of this port takes place on the https://lists.freebsd.org/subscription/freebsd-sparc64[freebsd-sparc] mailing list. == Table Of Contents * <> * <> * <> * <> [[status]] == Status UltraSPARC is a link:{committers-guide}#archs[Tier 2] architecture through FreeBSD 12.x. It is no longer supported in FreeBSD 13.0 and later. [[hw]] == Hardware List A summary of supported systems follows. SMP is supported on all supported systems that contain more than 1 processor. For full details, please see the link:../../releases/{rel120-current}r/hardware/[hardware notes] of the link:../../releases/[release] you are using. * Naturetech GENIALstation 777S * Sun Blade 100 * Sun Blade 150 * Sun Enterprise 150 * Sun Enterprise 220R * Sun Enterprise 250 * Sun Enterprise 420R * Sun Enterprise 450 * Sun Fire B100s (support for the on-board NICs first appeared in 8.1-RELEASE) * Sun Fire V100 * Sun Fire V120 * Sun Netra(T) T1 100/105 * Sun Netra T1 AC200/DC200 * Sun Netra t 1100 * Sun Netra t 1120 * Sun Netra t 1125 * Sun Netra t 1400/1405 * Sun Netra 120 * Sun Netra X1 * Sun SPARCEngine(R) Ultra AX1105 * Sun SPARCEngine Ultra AXe * Sun SPARCEngine Ultra AXi * Sun SPARCEngine Ultra AXmp * Sun SPARCEngine CP1500 * Sun Ultra(T) 1 * Sun Ultra 1E * Sun Ultra 2 * Sun Ultra 5 * Sun Ultra 10 * Sun Ultra 30 * Sun Ultra 60 * Sun Ultra 80 * Sun Ultra 450 These systems are partially supported by FreeBSD. In particular, the fibre channel controllers in SBus-based systems are not supported. However, it is possible to use these with a SCSI controller supported by the esp(4) driver (Sun ESP SCSI, Sun FAS Fast-SCSI and Sun FAS366 Fast-Wide SCSI controllers). * Sun Enterprise 3500 * Sun Enterprise 4500 Starting with 7.2-RELEASE, sparc64 systems based on Sun UltraSPARC III and beyond are also supported by FreeBSD, which includes these known working systems: * Sun Blade 1000 * Sun Blade 1500 * Sun Blade 2000 * Sun Blade 2500 * Sun Fire 280R * Sun Fire V210 * Sun Fire V215 (support first appeared in 7.3-RELEASE and 8.1-RELEASE) * Sun Fire V240 * Sun Fire V245 (support first appeared in 7.3-RELEASE and 8.1-RELEASE) * Sun Fire V250 * Sun Fire V440 (support for the on-board NICs first appeared in 7.3-RELEASE and 8.0-RELEASE) * Sun Fire V480 (501-6780 and 501-6790 centerplanes only, for which support first appeared in 7.3-RELEASE and 8.1-RELEASE, other centerplanes might work beginning with 8.3-RELEASE and 9.0-RELEASE) * Sun Fire V880 * Sun Fire V890 (support first appeared in 7.4-RELEASE and 8.1-RELEASE, non-mixed Ultrasparc IV/IV+ CPU-configurations only) * Sun Netra 20/Netra T4 These Sun UltraSPARC systems are not tested but are believed to also be supported by FreeBSD: * Sun Fire V125 * Sun Fire V490 (support first appeared in 7.4-RELEASE and 8.1-RELEASE, non-mixed Ultrasparc IV/IV+ CPU-configurations only) Starting with 7.4-RELEASE and 8.1-RELEASE, sparc64 systems based on Fujitsu SPARC64 V are also supported by FreeBSD, which includes these known working systems: * Fujitsu PRIMEPOWER(R) 250 These Fujitsu SPARC64 systems have not been tested but are believed to also be supported by FreeBSD: * Fujitsu PRIMEPOWER 450 * Fujitsu PRIMEPOWER 650 * Fujitsu PRIMEPOWER 850 If you have a system that is not listed here, please try it and let mailto:freebsd-sparc@FreeBSD.org[us] know about it. [[list]] == FreeBSD/sparc64 mailing list To subscribe to this list, send an email to `` or visit the https://lists.FreeBSD.org/subscription/freebsd-sparc64[mlmmj interface]. [[links]] == Points Of Interest * http://www.sparc.org/technical-documents-test-2/[SPARC Standards and technical documents] * http://www.netbsd.org/Ports/sparc64/[NetBSD/sparc64] * http://www.openbsd.org/sparc64.html[OpenBSD/sparc64]